lkml.org 
[lkml]   [2016]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/1] tty/serial: to support 8250 earlycon can be enabled independently
From
Date


On 2016/5/16 23:40, Peter Hurley wrote:
> On 05/16/2016 04:35 AM, Zhen Lei wrote:
>> Sometimes, we may only use SSH to login, and build 8250 uart driver as a
>> ko(insmod if needed). But the earlycon may still be necessary, because
>> the kernel boot process may take a long time. It's not good to display
>> nothing but ask people to wait patiently.
>
> I'm confused; you want the possibility of earlycon but _not_ a normal
> serial console?
Our downstream customers want add some private functions into 8250.ko. So that, we can not pre-build the 8250 driver into Image.

>
> This configuration is unsafe because nothing prevents the 8250 driver
> and 8250 earlycon from concurrently accessing the hardware.
earlycon is a boot console, it will be disabled in printk_late_init(suppose we have not set keep_bootcon).

>
>
>> In addition, the 8250.ko can not be worked if we have not opened any
>> other serial drivers, because SERIAL_CORE would not be selected.
>
> I don't understand what this means.

Before I opened CONFIG_SERIAL_AMBA_PL011_CONSOLE(only built 8250 as a module, this case can not be worked):
CONFIG_SERIAL_CORE=m

After I opened CONFIG_SERIAL_AMBA_PL011_CONSOLE:
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y

>
> Regards,
> Peter Hurley
>
>
>> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
>> ---
>> drivers/tty/serial/8250/Kconfig | 9 +++++++--
>> drivers/tty/serial/8250/Makefile | 1 -
>> drivers/tty/serial/Makefile | 1 +
>> 3 files changed, 8 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
>> index 4d7cb9c..2992f0a 100644
>> --- a/drivers/tty/serial/8250/Kconfig
>> +++ b/drivers/tty/serial/8250/Kconfig
>> @@ -3,6 +3,12 @@
>> # you somehow have an implicit or explicit dependency on SERIAL_8250.
>> #
>>
>> +config SERIAL_8250_EARLYCON
>> + bool "Early console using 8250"
>> + select SERIAL_CORE
>> + select SERIAL_CORE_CONSOLE
>> + select SERIAL_EARLYCON
>> +
>> config SERIAL_8250
>> tristate "8250/16550 and compatible serial support"
>> select SERIAL_CORE
>> @@ -60,8 +66,7 @@ config SERIAL_8250_PNP
>> config SERIAL_8250_CONSOLE
>> bool "Console on 8250/16550 and compatible serial port"
>> depends on SERIAL_8250=y
>> - select SERIAL_CORE_CONSOLE
>> - select SERIAL_EARLYCON
>> + select SERIAL_8250_EARLYCON
>> ---help---
>> If you say Y here, it will be possible to use a serial port as the
>> system console (the system console is the device which receives all
>> diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
>> index c9a2d6e..1f24c74 100644
>> --- a/drivers/tty/serial/8250/Makefile
>> +++ b/drivers/tty/serial/8250/Makefile
>> @@ -13,7 +13,6 @@ obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o
>> obj-$(CONFIG_SERIAL_8250_CS) += serial_cs.o
>> obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o
>> obj-$(CONFIG_SERIAL_8250_BCM2835AUX) += 8250_bcm2835aux.o
>> -obj-$(CONFIG_SERIAL_8250_CONSOLE) += 8250_early.o
>> obj-$(CONFIG_SERIAL_8250_FOURPORT) += 8250_fourport.o
>> obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o
>> obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o
>> diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
>> index 8c261ad..cd84181 100644
>> --- a/drivers/tty/serial/Makefile
>> +++ b/drivers/tty/serial/Makefile
>> @@ -19,6 +19,7 @@ obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o
>>
>> # Now bring in any enabled 8250/16450/16550 type drivers.
>> obj-$(CONFIG_SERIAL_8250) += 8250/
>> +obj-$(CONFIG_SERIAL_8250_EARLYCON) += 8250/8250_early.o
>>
>> obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
>> obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
>> --
>> 2.5.0
>>
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-serial" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>
>
> .
>

\
 
 \ /
  Last update: 2016-05-17 08:21    [W:0.062 / U:0.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site