lkml.org 
[lkml]   [2016]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 3/3] drm: Add helper for simple display pipeline
On Tue, May 17, 2016 at 03:04:52PM +0200, Daniel Vetter wrote:
> On Tue, May 17, 2016 at 02:22:26PM +0200, Noralf Trønnes wrote:
> >
> >
> > Den 17.05.2016 14:12, skrev Ville Syrjälä:
> > >On Tue, May 17, 2016 at 02:00:45PM +0200, Noralf Trønnes wrote:
> > >>Den 17.05.2016 09:59, skrev Daniel Vetter:
> > >>>On Tue, May 17, 2016 at 10:46:51AM +0300, Ville Syrjälä wrote:
> > >>>>On Tue, May 17, 2016 at 09:05:01AM +0200, Daniel Vetter wrote:
> > >>>>>On Thu, May 12, 2016 at 09:36:14PM +0300, Ville Syrjälä wrote:
> > >>>>>>On Thu, May 12, 2016 at 08:25:23PM +0200, Noralf Trønnes wrote:
> > >>>>>>>Provides helper functions for drivers that have a simple display
> > >>>>>>>pipeline. Plane, crtc and encoder are collapsed into one entity.
> > >>>>>>>
> > >>>>>>>Cc: jsarha@ti.com
> > >>>>>>>Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
> > >>>>>>>---
> > >>>>>>>
> > >>>>>>>Changes since v3:
> > >>>>>>>- (struct drm_simple_display_pipe *)->funcs should be const
> > >>>>>>>
> > >>>>>>>Changes since v2:
> > >>>>>>>- Drop Kconfig knob DRM_KMS_HELPER
> > >>>>>>>- Expand documentation
> > >>>>>>>
> > >>>>>>>Changes since v1:
> > >>>>>>>- Add DOC header and add to gpu.tmpl
> > >>>>>>>- Fix docs: @funcs is optional, "negative error code",
> > >>>>>>> "This hook is optional."
> > >>>>>>>- Add checks to drm_simple_kms_plane_atomic_check()
> > >>>>>>>
> > >>>>>>> Documentation/DocBook/gpu.tmpl | 6 +
> > >>>>>>> drivers/gpu/drm/Makefile | 2 +-
> > >>>>>>> drivers/gpu/drm/drm_simple_kms_helper.c | 208 ++++++++++++++++++++++++++++++++
> > >>>>>>> include/drm/drm_simple_kms_helper.h | 94 +++++++++++++++
> > >>>>>>> 4 files changed, 309 insertions(+), 1 deletion(-)
> > >>>>>>> create mode 100644 drivers/gpu/drm/drm_simple_kms_helper.c
> > >>>>>>> create mode 100644 include/drm/drm_simple_kms_helper.h
> > >>>>>>>
> > >>>>>>>diff --git a/Documentation/DocBook/gpu.tmpl b/Documentation/DocBook/gpu.tmpl
> > >>>>>>>index 4a0c599..cf3f5a8 100644
> > >>>>>>>--- a/Documentation/DocBook/gpu.tmpl
> > >>>>>>>+++ b/Documentation/DocBook/gpu.tmpl
> > >>>>>>>@@ -1693,6 +1693,12 @@ void intel_crt_init(struct drm_device *dev)
> > >>>>>>> !Edrivers/gpu/drm/drm_panel.c
> > >>>>>>> !Pdrivers/gpu/drm/drm_panel.c drm panel
> > >>>>>>> </sect2>
> > >>>>>>>+ <sect2>
> > >>>>>>>+ <title>Simple KMS Helper Reference</title>
> > >>>>>>>+!Iinclude/drm/drm_simple_kms_helper.h
> > >>>>>>>+!Edrivers/gpu/drm/drm_simple_kms_helper.c
> > >>>>>>>+!Pdrivers/gpu/drm/drm_simple_kms_helper.c overview
> > >>>>>>>+ </sect2>
> > >>>>>>> </sect1>
> > >>>>>>>
> > >>>>>>> <!-- Internals: kms properties -->
> > >>>>>>>diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
> > >>>>>>>index 2bd3e5a..31b85df5 100644
> > >>>>>>>--- a/drivers/gpu/drm/Makefile
> > >>>>>>>+++ b/drivers/gpu/drm/Makefile
> > >>>>>>>@@ -23,7 +23,7 @@ drm-$(CONFIG_AGP) += drm_agpsupport.o
> > >>>>>>>
> > >>>>>>> drm_kms_helper-y := drm_crtc_helper.o drm_dp_helper.o drm_probe_helper.o \
> > >>>>>>> drm_plane_helper.o drm_dp_mst_topology.o drm_atomic_helper.o \
> > >>>>>>>- drm_kms_helper_common.o
> > >>>>>>>+ drm_kms_helper_common.o drm_simple_kms_helper.o
> > >>>>>>>
> > >>>>>>> drm_kms_helper-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o
> > >>>>>>> drm_kms_helper-$(CONFIG_DRM_FBDEV_EMULATION) += drm_fb_helper.o
> > >>>>>>>diff --git a/drivers/gpu/drm/drm_simple_kms_helper.c b/drivers/gpu/drm/drm_simple_kms_helper.c
> > >>>>>>>new file mode 100644
> > >>>>>>>index 0000000..d45417a
> > >>>>>>>--- /dev/null
> > >>>>>>>+++ b/drivers/gpu/drm/drm_simple_kms_helper.c
> > >>>>>>>@@ -0,0 +1,208 @@
> > >>>>>>>+/*
> > >>>>>>>+ * Copyright (C) 2016 Noralf Trønnes
> > >>>>>>>+ *
> > >>>>>>>+ * This program is free software; you can redistribute it and/or modify
> > >>>>>>>+ * it under the terms of the GNU General Public License as published by
> > >>>>>>>+ * the Free Software Foundation; either version 2 of the License, or
> > >>>>>>>+ * (at your option) any later version.
> > >>>>>>>+ */
> > >>>>>>>+
> > >>>>>>>+#include <drm/drmP.h>
> > >>>>>>>+#include <drm/drm_atomic.h>
> > >>>>>>>+#include <drm/drm_atomic_helper.h>
> > >>>>>>>+#include <drm/drm_crtc_helper.h>
> > >>>>>>>+#include <drm/drm_plane_helper.h>
> > >>>>>>>+#include <drm/drm_simple_kms_helper.h>
> > >>>>>>>+#include <linux/slab.h>
> > >>>>>>>+
> > >>>>>>>+/**
> > >>>>>>>+ * DOC: overview
> > >>>>>>>+ *
> > >>>>>>>+ * This helper library provides helpers for drivers for simple display
> > >>>>>>>+ * hardware.
> > >>>>>>>+ *
> > >>>>>>>+ * drm_simple_display_pipe_init() initializes a simple display pipeline
> > >>>>>>>+ * which has only one full-screen scanout buffer feeding one output. The
> > >>>>>>>+ * pipeline is represented by struct &drm_simple_display_pipe and binds
> > >>>>>>>+ * together &drm_plane, &drm_crtc and &drm_encoder structures into one fixed
> > >>>>>>>+ * entity. Some flexibility for code reuse is provided through a separately
> > >>>>>>>+ * allocated &drm_connector object and supporting optional &drm_bridge
> > >>>>>>>+ * encoder drivers.
> > >>>>>>>+ */
> > >>>>>>>+
> > >>>>>>>+static const struct drm_encoder_funcs drm_simple_kms_encoder_funcs = {
> > >>>>>>>+ .destroy = drm_encoder_cleanup,
> > >>>>>>>+};
> > >>>>>>>+
> > >>>>>>>+static void drm_simple_kms_crtc_enable(struct drm_crtc *crtc)
> > >>>>>>>+{
> > >>>>>>>+ struct drm_simple_display_pipe *pipe;
> > >>>>>>>+
> > >>>>>>>+ pipe = container_of(crtc, struct drm_simple_display_pipe, crtc);
> > >>>>>>>+ if (!pipe->funcs || !pipe->funcs->enable)
> > >>>>>>>+ return;
> > >>>>>>>+
> > >>>>>>>+ pipe->funcs->enable(pipe, crtc->state);
> > >>>>>>>+}
> > >>>>>>>+
> > >>>>>>>+static void drm_simple_kms_crtc_disable(struct drm_crtc *crtc)
> > >>>>>>>+{
> > >>>>>>>+ struct drm_simple_display_pipe *pipe;
> > >>>>>>>+
> > >>>>>>>+ pipe = container_of(crtc, struct drm_simple_display_pipe, crtc);
> > >>>>>>>+ if (!pipe->funcs || !pipe->funcs->disable)
> > >>>>>>>+ return;
> > >>>>>>>+
> > >>>>>>>+ pipe->funcs->disable(pipe);
> > >>>>>>>+}
> > >>>>>>>+
> > >>>>>>>+static const struct drm_crtc_helper_funcs drm_simple_kms_crtc_helper_funcs = {
> > >>>>>>>+ .disable = drm_simple_kms_crtc_disable,
> > >>>>>>>+ .enable = drm_simple_kms_crtc_enable,
> > >>>>>>>+};
> > >>>>>>>+
> > >>>>>>>+static const struct drm_crtc_funcs drm_simple_kms_crtc_funcs = {
> > >>>>>>>+ .reset = drm_atomic_helper_crtc_reset,
> > >>>>>>>+ .destroy = drm_crtc_cleanup,
> > >>>>>>>+ .set_config = drm_atomic_helper_set_config,
> > >>>>>>>+ .page_flip = drm_atomic_helper_page_flip,
> > >>>>>>>+ .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
> > >>>>>>>+ .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
> > >>>>>>>+};
> > >>>>>>>+
> > >>>>>>>+static int drm_simple_kms_plane_atomic_check(struct drm_plane *plane,
> > >>>>>>>+ struct drm_plane_state *plane_state)
> > >>>>>>>+{
> > >>>>>>>+ struct drm_rect src = {
> > >>>>>>>+ .x1 = plane_state->src_x,
> > >>>>>>>+ .y1 = plane_state->src_y,
> > >>>>>>>+ .x2 = plane_state->src_x + plane_state->src_w,
> > >>>>>>>+ .y2 = plane_state->src_y + plane_state->src_h,
> > >>>>>>>+ };
> > >>>>>>>+ struct drm_rect dest = {
> > >>>>>>>+ .x1 = plane_state->crtc_x,
> > >>>>>>>+ .y1 = plane_state->crtc_y,
> > >>>>>>>+ .x2 = plane_state->crtc_x + plane_state->crtc_w,
> > >>>>>>>+ .y2 = plane_state->crtc_y + plane_state->crtc_h,
> > >>>>>>>+ };
> > >>>>>>>+ struct drm_rect clip = { 0 };
> > >>>>>>>+ struct drm_simple_display_pipe *pipe;
> > >>>>>>>+ struct drm_crtc_state *crtc_state;
> > >>>>>>>+ bool visible;
> > >>>>>>>+ int ret;
> > >>>>>>>+
> > >>>>>>>+ pipe = container_of(plane, struct drm_simple_display_pipe, plane);
> > >>>>>>>+ crtc_state = drm_atomic_get_existing_crtc_state(plane_state->state,
> > >>>>>>>+ &pipe->crtc);
> > >>>>>>>+ if (crtc_state->enable != !!plane_state->crtc)
> > >>>>>>>+ return -EINVAL; /* plane must match crtc enable state */
> > >>>>>>>+
> > >>>>>>>+ if (!crtc_state->enable)
> > >>>>>>>+ return 0; /* nothing to check when disabling or disabled */
> > >>>>>>>+
> > >>>>>>>+ clip.x2 = crtc_state->adjusted_mode.hdisplay;
> > >>>>>>>+ clip.y2 = crtc_state->adjusted_mode.vdisplay;
> > >>>>>>>+ ret = drm_plane_helper_check_update(plane, &pipe->crtc,
> > >>>>>>>+ plane_state->fb,
> > >>>>>>>+ &src, &dest, &clip,
> > >>>>>>>+ DRM_PLANE_HELPER_NO_SCALING,
> > >>>>>>>+ DRM_PLANE_HELPER_NO_SCALING,
> > >>>>>>>+ false, true, &visible);
> > >>>>>>>+ if (ret)
> > >>>>>>>+ return ret;
> > >>>>>>>+
> > >>>>>>>+ if (!visible)
> > >>>>>>>+ return -EINVAL;
> > >>>>>>>+
> > >>>>>>>+ if (!pipe->funcs || !pipe->funcs->check)
> > >>>>>>>+ return 0;
> > >>>>>>>+
> > >>>>>>>+ return pipe->funcs->check(pipe, plane_state, crtc_state);
> > >>>>>>>+}
> > >>>>>>What's anyone supposed to do with this when the clipped coordinates
> > >>>>>>aren't even passed/stored anywhere?
> > >>>>>It disallows positioning and scaling, so shouldn't ever need to have the
> > >>>>>clipped area?
> > >>>>You can still configure a larger area that gets clipped to the
> > >>>>fullscreen dimensions.
> > >>>Oh right. Noralf, sounds like we need to feed back the clipped rectangle.
> > >>>Probably best if we add clipped plane coordinates to drm_plane_state.
> > >>Both src and crtc or only src?
> > >>
> > >> if (!visible)
> > >> return -EINVAL;
> > >>+
> > >>+ plane_state->src_x = src.x1;
> > >>+ plane_state->src_y = src.y1;
> > >>+ plane_state->src_w = drm_rect_width(&src);
> > >>+ plane_state->src_h = drm_rect_height(&src);
> > >>+
> > >>+ plane_state->crtc_x = dest.x1;
> > >>+ plane_state->crtc_y = dest.y1;
> > >>+ plane_state->crtc_w = drm_rect_width(&dest);
> > >>+ plane_state->crtc_h = drm_rect_height(&dest);
> > >You aren't allowed clobber the user provided coordinates like this.
> > >What you need to do is store the clipped coordinates in the plane
> > >state in addition to the user coordinates.
> >
> > How do I do that?
>
> Add new set of plane_state->clipped_src/dst_x/y/h/w I think, and suggest
> to drivers to use that if they need clipped coordinates. I think at least,
> all these clip rects are a bit too confusing to me. Ville?

Basically everyone should use the clipped coords. There must be
something very special going on if anyone wants to use the raw user
coords.

--
Ville Syrjälä
Intel OTC

\
 
 \ /
  Last update: 2016-05-17 15:41    [W:0.092 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site