lkml.org 
[lkml]   [2016]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] dt: add Atmel Captouch bindings
From
On Sat, May 14, 2016 at 7:52 AM, Rob Herring <robh@kernel.org> wrote:
> On Tue, May 10, 2016 at 07:07:48PM -0700, Grant Grundler wrote:
>> From: Daniel Hung-yu Wu <hywu@google.com>
>>
>> Add binding for Atmel Capacitive Touch Button device.
>>
>> Signed-off-by: Daniel Hung-yu Wu <hywu@google.com>
>> Signed-off-by: Grant Grundler <grundler@chromium.org>
>> ---
>> .../devicetree/bindings/input/atmel,captouch.txt | 34 ++++++++++++++++++++++
>> 1 file changed, 34 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/input/atmel,captouch.txt
>>
>> I haven't posted the corresponding device driver and dtsi changes yet but will shortly.
>>
>> V2: split Documentation/devicetree/bindings from driver patch
>> rename "atmel,atmegaxx_captouch" to "atmel,captouch" since it's irrelevant
>> which controller implements the register set/controller.
>
> Is there any notion of firmware versions though?

There currently is not. This is something we need to add - future patch.

>
>>
>> V1: posted https://lkml.org/lkml/2016/5/3/613
>>
>> diff --git a/Documentation/devicetree/bindings/input/atmel,captouch.txt b/Documentation/devicetree/bindings/input/atmel,captouch.txt
>> new file mode 100644
>> index 0000000..405d287
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/input/atmel,captouch.txt
>> @@ -0,0 +1,34 @@
>> +Device tree bindings for Atmel AtmegaXX capacitive touch sensor
>> +
>> +The node for this device must be a child of a I2C controller node, as the
>> +device communicates via I2C.
>> +
>> +Required properties:
>> +
>> + compatible: Must be "atmel,captouch".
>> + reg: The I2C slave address of the device.
>> + interrupts: Property describing the interrupt line the device
>> + is connected to. The device only has one interrupt
>> + source.
>> + linux,keycodes: Specifies an array of numeric keycode values to
>> + be used for reporting button presses. The array can
>> + contain up to 8 entries.
>> +
>> +Optional properties:
>> +
>> + autorepeat: Enables the Linux input system's autorepeat
>> + feature on the input device.
>> +
>> +Example:
>> +
>> + atmel_captouch@51 {
>
> No underscores in node names please.

Aaahh! Sorry! you told me that before. Will post V3 with dash in node name.

cheers,
grant

>
>> + compatible = "atmel,captouch";
>> + reg = <0x51>;
>> + interrupt-parent = <&tlmm>;
>> + interrupts = <67 IRQ_TYPE_EDGE_FALLING>;
>> + linux,keycodes = <BTN_0>, <BTN_1>,
>> + <BTN_2>, <BTN_3>,
>> + <BTN_4>, <BTN_5>,
>> + <BTN_6>, <BTN_7>;
>> + autorepeat;
>> + };
>> --
>> 2.1.2
>>

\
 
 \ /
  Last update: 2016-05-16 19:01    [W:0.093 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site