lkml.org 
[lkml]   [2016]   [May]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 1/7] powerpc/8xx: Fix vaddr for IMMR early remap
From
Date

Le 11/05/2016 à 22:38, Scott Wood a écrit :
> On Wed, 2016-05-11 at 17:03 +0200, Christophe Leroy wrote:
>> Memory: 124428K/131072K available (3748K kernel code, 188K rwdata,
>> 648K rodata, 508K init, 290K bss, 6644K reserved)
>> Kernel virtual memory layout:
>> * 0xfffdf000..0xfffff000 : fixmap
>> * 0xfde00000..0xfe000000 : consistent mem
>> * 0xfddf6000..0xfde00000 : early ioremap
>> * 0xc9000000..0xfddf6000 : vmalloc & ioremap
>> SLUB: HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>>
>> Today, IMMR is mapped 1:1 at startup
>>
>> Mapping IMMR 1:1 is just wrong because it may overlap with another
>> area. On most mpc8xx boards it is OK as IMMR is set to 0xff000000
>> but for instance on EP88xC board, IMMR is at 0xfa200000 which
>> overlaps with VM ioremap area
>>
>> This patch fixes the virtual address for remapping IMMR with the fixmap
>> regardless of the value of IMMR.
>>
>> The size of IMMR area is 256kbytes (CPM at offset 0, security engine
>> at offset 128k) so a 512k page is enough
>>
>> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
>> ---
>> v2: No change
>>
>> arch/powerpc/include/asm/fixmap.h | 7 +++++++
>> arch/powerpc/kernel/asm-offsets.c | 8 ++++++++
>> arch/powerpc/kernel/head_8xx.S | 11 ++++++-----
>> arch/powerpc/mm/mmu_decl.h | 7 +++++++
>> arch/powerpc/sysdev/cpm_common.c | 15 ++++++++++++---
>> 5 files changed, 40 insertions(+), 8 deletions(-)
>>
>> diff --git a/arch/powerpc/include/asm/fixmap.h
>> b/arch/powerpc/include/asm/fixmap.h
>> index 90f604b..4508b32 100644
>> --- a/arch/powerpc/include/asm/fixmap.h
>> +++ b/arch/powerpc/include/asm/fixmap.h
>> @@ -51,6 +51,13 @@ enum fixed_addresses {
>> FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel
>> mappings */
>> FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
>> #endif
>> +#ifdef CONFIG_PPC_8xx
>> + /* For IMMR we need an aligned 512K area */
>> +#define FIX_IMMR_SIZE (512 * 1024 / PAGE_SIZE)
>> + FIX_IMMR_START,
>> + FIX_IMMR_BASE = __ALIGN_MASK(FIX_IMMR_START, FIX_IMMR_SIZE - 1) - 1 +
>> +
>> + FIX_IMMR_SIZE,
>> +#endif
> What happens if FIX_IMMR_START is, for example, 0x100? Then
> "__ALIGN_MASK(FIX_IMMR_START, FIX_IMMR_SIZE - 1) - 1" would be 0xff -- you've
> gone backwards. FIX_IMMR_BASE would be 0x17f, translating to an address of
> 0xffe80000. IMMR would end at 0xfff00000. The kmap range would begin at
> 0xffeff000 and you'd have an overlap.
>
> I think what you want is:
> FIX_IMMR_BASE = (FIX_IMMR_START & ~(FIX_IMMR_SIZE - 1)) +
> FIX_IMMR_SIZE - 1,
>
Why would the kmap range begin at 0xffeff000 ?
If FIX_IMMR_START is 0x100, this means FIX_KMAP_END is 0x0ff, so the
kmap range should begin at 0xfff00000, shouldn't it ?

Christophe

\
 
 \ /
  Last update: 2016-05-13 12:01    [W:0.079 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site