lkml.org 
[lkml]   [2016]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 2/2] i2c: qup: Fixed the DMA segments length
Date
Hi,

> 1. The current QCOM I2C driver code is failing for transfer length greater
> than 255. This is happening due to improper segments length as the I2C DMA
> segments can be maximum of 256 bytes.
>
> 2. The transfer length tlen was being initialized with 0 for 256 bytes,
which is
> being passed for DMA mappings resulting in improper DMA mapping length.
>
> This patch fixes the above said problems by initializing the block count
with
> the values calculated in qup_i2c_set_blk_data and calculating the
remaining
> length for last DMA segment. Also, the block data length need to be
> decremented after each transfer. Additionally, this patch corrects the
tlen
> assignment for DMA mapping.
>
> Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
> ---
> drivers/i2c/busses/i2c-qup.c | 12 +++++++-----
> 1 file changed, 7 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
index
> 8c2f1bc..6d6b7dc 100644
> --- a/drivers/i2c/busses/i2c-qup.c
> +++ b/drivers/i2c/busses/i2c-qup.c
> @@ -651,23 +651,24 @@ static int qup_i2c_bam_do_xfer(struct
> qup_i2c_dev *qup, struct i2c_msg *msg,
> u8 *tags;
>
> while (idx < num) {
> - blocks = (msg->len + limit) / limit;
> - rem = msg->len % limit;
> tx_len = 0, len = 0, i = 0;
>
> qup->is_last = (idx == (num - 1));
>
> qup_i2c_set_blk_data(qup, msg);
>
> + blocks = qup->blk.count;
> + rem = msg->len - (blocks - 1) * limit;
> +
Same if we had blocks = (msg->len + limit - 1) / limit instead of the
above ?
Otherwise,
Reviewed-by: Sricharan@codeaurora.org

Regards,
Sricharan

\
 
 \ /
  Last update: 2016-05-11 18:41    [W:1.162 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site