lkml.org 
[lkml]   [2016]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [Question] Missing data after DMA read transfer - mm issue with transparent huge page?
From
Date


Le 05/10/2016 à 03:34 PM, Jerome Glisse a écrit :
> On Tue, May 10, 2016 at 01:15:02PM +0200, Nicolas Morey Chaisemartin wrote:
>> Le 05/10/2016 à 12:01 PM, Jerome Glisse a écrit :
>>> On Tue, May 10, 2016 at 09:04:36AM +0200, Nicolas Morey Chaisemartin wrote:
>>>> Le 05/03/2016 à 12:11 PM, Jerome Glisse a écrit :
>>>>> On Mon, May 02, 2016 at 09:04:02PM -0700, Hugh Dickins wrote:
>>>>>> On Fri, 29 Apr 2016, Nicolas Morey Chaisemartin wrote:
> [...]
>
>>>> Hi,
>>>>
>>>> I backported the patch to 3.10 (had to copy paste pmd_protnone defitinition from 4.5) and it's working !
>>>> I'll open a ticket in Redhat tracker to try and get this fixed in RHEL7.
>>>>
>>>> I have a dumb question though: how can we end up in numa/misplaced memory code on a single socket system?
>>>>
>>> This patch is not a fix, do you see bug message in kernel log ? Because if
>>> you do that it means we have a bigger issue.
>> I don't see any on my 3.10. I have DMA_API_DEBUG enabled but I don't think it has an impact.
> My patch can't be backported to 3.10 as is, you most likely need to replace
> pmd_protnone() by pmd_numa()
>
>>> You did not answer one of my previous question, do you set get_user_pages
>>> with write = 1 as a paremeter ?
>> For the read from the device, yes:
>> down_read(&current->mm->mmap_sem);
>> res = get_user_pages(
>> current,
>> current->mm,
>> (unsigned long) iov->host_addr,
>> page_count,
>> (write_mode == 0) ? 1 : 0, /* write */
>> 0, /* force */
>> &trans->pages[sg_o],
>> NULL);
>> up_read(&current->mm->mmap_sem);
> As i don't have context to infer how write_mode is set above, do you mind
> retesting your driver and always asking for write no matter what ?
write_mode is 0 for car2host transfers so yes, write_mode is 1.
During debug I tried with write_mode=1 and force=1 in all cases and it failed too.
>>> Also it would be a lot easier if you were testing with lastest 4.6 or 4.5
>>> not RHEL kernel as they are far appart and what might looks like same issue
>>> on both might be totaly different bugs.
>> Is a RPM from elrepo ok?
>> http://elrepo.org/linux/kernel/el7/SRPMS/
> Yes should be ok for testing.
>
I tried the elrpo 4.5.2 package without your patch and my test fails, sadly the src rpm from elrepo does not contaisn the kernel sources and I haven't looked how to get the proper tarball.
I tried to rebuild a src rpm for a fedora 24 (kernel 4.5.3) and it works without your patch. I'm not sure what differs in their config. I'll keep digging.

Nicolas

\
 
 \ /
  Last update: 2016-05-11 11:41    [W:0.058 / U:0.432 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site