lkml.org 
[lkml]   [2016]   [May]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFT PATCH 0/3] usb: misc: usb3503: Fix missing device when TFTP booting
From
Date
On 05/01/2016 03:17 PM, Krzysztof Kozlowski wrote:
> On Sat, Apr 30, 2016 at 11:43:44AM +0200, Hans Verkuil wrote:
>> Hi Krzysztof,
>>
>> On 04/29/2016 12:59 PM, Krzysztof Kozlowski wrote:
>>> Hi,
>>>
>>> Patches are independent, please pick up as you wish.
>>>
>>> However all of them are needed to solve the issue, so I am sending
>>> everything together for easier testng.
>>>
>>>
>>> Problem
>>> =======
>>> When Odroid U3 (usb3503 + smsc95xx + max77686) boots from network (TFTP),
>>> the usb3503 does not show up in "lsusb". Hard-reset is required, e.g.
>>> by suspend to RAM. The actual TFTP boot does not have to happen. Just
>>> "usb start" from U-Boot is sufficient.
>>>
>>>
>>> Solution
>>> ========
>>> Perform real hardware reset (including regulator off/on) when probing.
>>>
>>>
>>> Tested on Odroid U3 so far. Please kindly test on X2 and other
>>> configurations and bootloaders.
>>
>> Against which kernel git repo is this patch?
>>
>> I did apply this patch series first:
>>
>> http://www.spinics.net/lists/arm-kernel/msg500764.html
>
> Indeed it is based on above patchset... and on linux-next. It touches
> multiple trees so next seems the easiest base.
>
>>
>> followed by this patch series.
>>
>> I've tested with both 4.6.0-rc2 and -rc5, but in all cases (even without
>> applying these patches!) the boot sequence hangs here:
>>
>> ...
>> [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations
>> exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops)
>> exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops)
>> [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>> [drm] No driver support for vblank timestamp query.
>> Console: switching to colour frame buffer device 240x67
>> exynos-drm exynos-drm: fb0: frame buffer device
>> [drm] Initialized exynos 1.0.0 20110530 on minor 0
>> brd: module loaded
>> loop: module loaded
>> s3c64xx-spi 13930000.spi: spi bus clock parent not specified, using clock
>> at index 0 as parent
>> s3c64xx-spi 13930000.spi: number of chip select lines not specified,
>> assuming 1 chip select line
>> tun: Universal TUN/TAP device driver, 1.6
>> tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>> usbcore: registered new interface driver asix
>> usbcore: registered new interface driver ax88179_178a
>> usbcore: registered new interface driver cdc_ether
>> usbcore: registered new interface driver smsc95xx
>> usbcore: registered new interface driver cdc_ncm
>> dwc2 12480000.hsotg: Specified GNPTXFDEP=1024 > 768
>> dwc2 12480000.hsotg: EPs: 16, dedicated fifos, 7808 entries in SPRAM
>> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>> ehci-exynos: EHCI EXYNOS driver
>> exynos-ehci 12580000.ehci: EHCI Host Controller
>> exynos-ehci 12580000.ehci: new USB bus registered, assigned bus number 1
>> exynos-ehci 12580000.ehci: irq 51, io mem 0x12580000
>> exynos-ehci 12580000.ehci: USB 2.0 started, EHCI 1.00
>> usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>> usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> usb usb1: Product: EHCI Host Controller
>> usb usb1: Manufacturer: Linux 4.6.0-rc5-odroid ehci_hcd
>> usb usb1: SerialNumber: 12580000.ehci
>> hub 1-0:1.0: USB hub found
>> hub 1-0:1.0: 3 ports detected
>> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>> ohci-exynos: OHCI EXYNOS driver
>> usbcore: registered new interface driver usb-storage
>> usb3503 0-0008: switched to HUB mode
>> usb3503 0-0008: usb3503_probe: probed in hub mode
>> using random self ethernet address
>> using random host ethernet address
>> usb0: HOST MAC 66:79:ef:11:72:85
>> usb0: MAC 1e:66:f2:66:8e:2a
>> using random self ethernet address
>> using random host ethernet address
>> g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
>> g_ether gadget: g_ether ready
>> dwc2 12480000.hsotg: bound driver g_ether
>> mousedev: PS/2 mouse device common for all mice
>> max77686-rtc max77686-rtc: rtc core: registered max77686-rtc as rtc0
>> i2c /dev entries driver
>> s5p-fimc-md camera: Entity type for entity FIMC.0 was not initialized!
>> usb 1-2: new high-speed USB device number 2 using exynos-ehci
>> usb 1-2: New USB device found, idVendor=0424, idProduct=9730
>> usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>> smsc95xx v1.0.4
>> smsc95xx 1-2:1.0 eth0: register 'smsc95xx' at usb-12580000.ehci-2, smsc95xx
>> USB 2.0 Ethernet, c2:22:09:f2:5f:e8
>> usb 1-3: new high-speed USB device number 3 using exynos-ehci
>> usb 1-3: New USB device found, idVendor=0424, idProduct=3503
>> usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>> hub 1-3:1.0: USB hub found
>> hub 1-3:1.0: 3 ports detected
>>
>> No oops, no nothing. It's just sitting there.
>
> Apparently you have encountered different issue. sysrq with 'l' might be
> useful.
>
>> Is this a regression that was introduced in 4.6? Or is there some special
>> new config that needs to be turned on first in 4.6?
>
> I think it was like that for looong time... although I did not use
> netboot before on that target.

Sorry, I meant the hanging issue I got in 4.6, not the ethernet issue.
I get the same problem with linux-next. Can you mail me the .config you are using?

After some more testing I don't think it is hanging, instead it seems that the mmc
isn't enabled/found and so it just sits waiting for the root partition to appear.

Weird.

Regards,

Hans

\
 
 \ /
  Last update: 2016-05-01 16:21    [W:0.230 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site