lkml.org 
[lkml]   [2016]   [Apr]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRE: [PATCH v3 2/2] dmaengine: vdma: Fix race condition in Non-SG mode
Date
Hi Vinod,

> -----Original Message-----
> From: Vinod Koul [mailto:vinod.koul@intel.com]
> Sent: Wednesday, April 06, 2016 3:23 AM
> To: Appana Durga Kedareswara Rao <appanad@xilinx.com>
> Cc: dan.j.williams@intel.com; Michal Simek <michals@xilinx.com>; Soren
> Brinkmann <sorenb@xilinx.com>; Appana Durga Kedareswara Rao
> <appanad@xilinx.com>; moritz.fischer@ettus.com;
> laurent.pinchart@ideasonboard.com; luis@debethencourt.com; Srikanth
> Vemula <svemula@xilinx.com>; Anirudha Sarangi <anirudh@xilinx.com>;
> dmaengine@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-
> kernel@vger.kernel.org
> Subject: Re: [PATCH v3 2/2] dmaengine: vdma: Fix race condition in Non-SG
> mode
>
> On Fri, Mar 25, 2016 at 02:46:39PM +0530, Kedareswara rao Appana wrote:
> > When VDMA is configured in Non-sg mode Users can queue descriptors
> > greater than h/w configured frames.
> >
> > Current driver allows the user to queue descriptors upto h/w configured.
> > Which is wrong for non-sg mode configuration.
>
> I see to have standalone patch 2, where is 1st patch?
>
> There seems to be an issue with other 6 patch series with threading broken and
> few patches showing up standalone and not part of series
>
> Can you resend the whole thing please..

Ok Sure will resend both the patch series again....

Regards,
Kedar.

>
> >
> > This patch fixes this issue.
> >
> > Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
> > ---
> > Changes for v3:
> > ---> New patch.
> >
> > drivers/dma/xilinx/xilinx_vdma.c | 25 +++++++++++++++++++------
> > 1 file changed, 19 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/dma/xilinx/xilinx_vdma.c
> > b/drivers/dma/xilinx/xilinx_vdma.c
> > index abe915c..b873d98 100644
> > --- a/drivers/dma/xilinx/xilinx_vdma.c
> > +++ b/drivers/dma/xilinx/xilinx_vdma.c
> > @@ -209,6 +209,7 @@ struct xilinx_vdma_tx_descriptor {
> > * @flush_on_fsync: Flush on Frame sync
> > * @desc_pendingcount: Descriptor pending count
> > * @ext_addr: Indicates 64 bit addressing is supported by dma channel
> > + * @desc_submitcount: Descriptor h/w submitted count
> > */
> > struct xilinx_vdma_chan {
> > struct xilinx_vdma_device *xdev;
> > @@ -233,6 +234,7 @@ struct xilinx_vdma_chan {
> > bool flush_on_fsync;
> > u32 desc_pendingcount;
> > bool ext_addr;
> > + u32 desc_submitcount;
> > };
> >
> > /**
> > @@ -716,9 +718,10 @@ static void xilinx_vdma_start_transfer(struct
> xilinx_vdma_chan *chan)
> > struct xilinx_vdma_tx_segment *segment, *last = NULL;
> > int i = 0;
> >
> > - list_for_each_entry(desc, &chan->pending_list, node) {
> > - segment = list_first_entry(&desc->segments,
> > - struct xilinx_vdma_tx_segment,
> node);
> > + if (chan->desc_submitcount < chan->num_frms)
> > + i = chan->desc_submitcount;
> > +
> > + list_for_each_entry(segment, &desc->segments, node) {
> > if (chan->ext_addr)
> > vdma_desc_write_64(chan,
> >
> XILINX_VDMA_REG_START_ADDRESS_64(i++),
> > @@ -742,8 +745,17 @@ static void xilinx_vdma_start_transfer(struct
> xilinx_vdma_chan *chan)
> > vdma_desc_write(chan, XILINX_VDMA_REG_VSIZE, last-
> >hw.vsize);
> > }
> >
> > - list_splice_tail_init(&chan->pending_list, &chan->active_list);
> > - chan->desc_pendingcount = 0;
> > + if (!chan->has_sg) {
> > + list_del(&desc->node);
> > + list_add_tail(&desc->node, &chan->active_list);
> > + chan->desc_submitcount++;
> > + chan->desc_pendingcount--;
> > + if (chan->desc_submitcount == chan->num_frms)
> > + chan->desc_submitcount = 0;
> > + } else {
> > + list_splice_tail_init(&chan->pending_list, &chan->active_list);
> > + chan->desc_pendingcount = 0;
> > + }
> > }
> >
> > /**
> > @@ -927,7 +939,8 @@ append:
> > list_add_tail(&desc->node, &chan->pending_list);
> > chan->desc_pendingcount++;
> >
> > - if (unlikely(chan->desc_pendingcount > chan->num_frms)) {
> > + if (chan->has_sg &&
> > + unlikely(chan->desc_pendingcount > chan->num_frms)) {
> > dev_dbg(chan->dev, "desc pendingcount is too high\n");
> > chan->desc_pendingcount = chan->num_frms;
> > }
> > --
> > 2.1.2
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe dmaengine"
> > in the body of a message to majordomo@vger.kernel.org More majordomo
> > info at http://vger.kernel.org/majordomo-info.html
>
> --
> ~Vinod

\
 
 \ /
  Last update: 2016-04-06 07:21    [W:0.042 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site