lkml.org 
[lkml]   [2016]   [Apr]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] iio: imu: Add initial support for Bosch BMI160
Date
BMI160 is an Inertial Measurement Unit (IMU) which provides acceleration
and angular rate measurement. It also offers a secondary I2C interface
for connecting a magnetometer sensor (usually BMM160).

Current driver offers support for accelerometer and gyroscope readings
via sysfs or via buffer interface using an external trigger (e.g.
hrtimer). Data is retrieved from IMU via I2C or SPI interface.

Datasheet is at:
http://www.mouser.com/ds/2/783/BST-BMI160-DS000-07-786474.pdf

Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
---
Changes since v1:
* addressed comments from Jonathan and Peter
* fixed Kconfig spelling
* shared bmi160_regmap_config between i2c and spi modules
* clarify timeouts unit (useconds)
* use sizeof(_le16) consistently
* 1 -> true
* clarify documentation references to datasheet

drivers/iio/imu/Kconfig | 2 +
drivers/iio/imu/Makefile | 1 +
drivers/iio/imu/bmi160/Kconfig | 32 ++
drivers/iio/imu/bmi160/Makefile | 6 +
drivers/iio/imu/bmi160/bmi160.h | 10 +
drivers/iio/imu/bmi160/bmi160_core.c | 594 +++++++++++++++++++++++++++++++++++
drivers/iio/imu/bmi160/bmi160_i2c.c | 71 +++++
drivers/iio/imu/bmi160/bmi160_spi.c | 62 ++++
8 files changed, 778 insertions(+)
create mode 100644 drivers/iio/imu/bmi160/Kconfig
create mode 100644 drivers/iio/imu/bmi160/Makefile
create mode 100644 drivers/iio/imu/bmi160/bmi160.h
create mode 100644 drivers/iio/imu/bmi160/bmi160_core.c
create mode 100644 drivers/iio/imu/bmi160/bmi160_i2c.c
create mode 100644 drivers/iio/imu/bmi160/bmi160_spi.c

diff --git a/drivers/iio/imu/Kconfig b/drivers/iio/imu/Kconfig
index 5e610f7..1f1ad41 100644
--- a/drivers/iio/imu/Kconfig
+++ b/drivers/iio/imu/Kconfig
@@ -25,6 +25,8 @@ config ADIS16480
Say yes here to build support for Analog Devices ADIS16375, ADIS16480,
ADIS16485, ADIS16488 inertial sensors.

+source "drivers/iio/imu/bmi160/Kconfig"
+
config KMX61
tristate "Kionix KMX61 6-axis accelerometer and magnetometer"
depends on I2C
diff --git a/drivers/iio/imu/Makefile b/drivers/iio/imu/Makefile
index e1e6e3d..c71bcd3 100644
--- a/drivers/iio/imu/Makefile
+++ b/drivers/iio/imu/Makefile
@@ -13,6 +13,7 @@ adis_lib-$(CONFIG_IIO_ADIS_LIB_BUFFER) += adis_trigger.o
adis_lib-$(CONFIG_IIO_ADIS_LIB_BUFFER) += adis_buffer.o
obj-$(CONFIG_IIO_ADIS_LIB) += adis_lib.o

+obj-y += bmi160/
obj-y += inv_mpu6050/

obj-$(CONFIG_KMX61) += kmx61.o
diff --git a/drivers/iio/imu/bmi160/Kconfig b/drivers/iio/imu/bmi160/Kconfig
new file mode 100644
index 0000000..005c17c
--- /dev/null
+++ b/drivers/iio/imu/bmi160/Kconfig
@@ -0,0 +1,32 @@
+#
+# BMI160 IMU driver
+#
+
+config BMI160
+ tristate
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+
+config BMI160_I2C
+ tristate "Bosch BMI160 I2C driver"
+ depends on I2C
+ select BMI160
+ select REGMAP_I2C
+ help
+ If you say yes here you get support for BMI160 IMU on I2C with
+ accelerometer, gyroscope and external BMG160 magnetometer.
+
+ This driver can also be built as a module. If so, the module will be
+ called bmi160_i2c.
+
+config BMI160_SPI
+ tristate "Bosch BMI160 SPI driver"
+ depends on SPI
+ select BMI160
+ select REGMAP_SPI
+ help
+ If you say yes here you get support for BMI160 IMU on SPI with
+ accelerometer, gyroscope and external BMG160 magnetometer.
+
+ This driver can also be built as a module. If so, the module will be
+ called bmi160_spi.
diff --git a/drivers/iio/imu/bmi160/Makefile b/drivers/iio/imu/bmi160/Makefile
new file mode 100644
index 0000000..10365e4
--- /dev/null
+++ b/drivers/iio/imu/bmi160/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for Bosch BMI160 IMU
+#
+obj-$(CONFIG_BMI160) += bmi160_core.o
+obj-$(CONFIG_BMI160_I2C) += bmi160_i2c.o
+obj-$(CONFIG_BMI160_SPI) += bmi160_spi.o
diff --git a/drivers/iio/imu/bmi160/bmi160.h b/drivers/iio/imu/bmi160/bmi160.h
new file mode 100644
index 0000000..d2ae6ed
--- /dev/null
+++ b/drivers/iio/imu/bmi160/bmi160.h
@@ -0,0 +1,10 @@
+#ifndef BMI160_H_
+#define BMI160_H_
+
+extern const struct regmap_config bmi160_regmap_config;
+
+int bmi160_core_probe(struct device *dev, struct regmap *regmap,
+ const char *name, bool use_spi);
+void bmi160_core_remove(struct device *dev);
+
+#endif /* BMI160_H_ */
diff --git a/drivers/iio/imu/bmi160/bmi160_core.c b/drivers/iio/imu/bmi160/bmi160_core.c
new file mode 100644
index 0000000..eef04a3
--- /dev/null
+++ b/drivers/iio/imu/bmi160/bmi160_core.c
@@ -0,0 +1,594 @@
+/*
+ * BMI160 - Bosch IMU (accel, gyro plus external magnetometer)
+ *
+ * Copyright (c) 2016, Intel Corporation.
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License. See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * IIO core driver for BMI160, with support for I2C/SPI busses
+ *
+ * TODO: magnetometer, interrupts, hardware FIFO
+ */
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/acpi.h>
+#include <linux/delay.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/buffer.h>
+
+#include "bmi160.h"
+
+#define BMI160_REG_CHIP_ID 0x00
+#define BMI160_CHIP_ID_VAL 0xD1
+
+#define BMI160_REG_PMU_STATUS 0x03
+
+/* X axis data low byte address, the rest can be obtained using axis offset */
+#define BMI160_REG_DATA_MAGN_XOUT_L 0x04
+#define BMI160_REG_DATA_GYRO_XOUT_L 0x0C
+#define BMI160_REG_DATA_ACCEL_XOUT_L 0x12
+
+#define BMI160_REG_ACCEL_CONFIG 0x40
+#define BMI160_ACCEL_CONFIG_ODR_MASK GENMASK(3, 0)
+#define BMI160_ACCEL_CONFIG_BWP_MASK GENMASK(6, 4)
+
+#define BMI160_REG_ACCEL_RANGE 0x41
+#define BMI160_ACCEL_RANGE_2G 0x03
+#define BMI160_ACCEL_RANGE_4G 0x05
+#define BMI160_ACCEL_RANGE_8G 0x08
+#define BMI160_ACCEL_RANGE_16G 0x0C
+
+#define BMI160_REG_GYRO_CONFIG 0x42
+#define BMI160_GYRO_CONFIG_ODR_MASK GENMASK(3, 0)
+#define BMI160_GYRO_CONFIG_BWP_MASK GENMASK(5, 4)
+
+#define BMI160_REG_GYRO_RANGE 0x43
+#define BMI160_GYRO_RANGE_2000DPS 0x00
+#define BMI160_GYRO_RANGE_1000DPS 0x01
+#define BMI160_GYRO_RANGE_500DPS 0x02
+#define BMI160_GYRO_RANGE_250DPS 0x03
+#define BMI160_GYRO_RANGE_125DPS 0x04
+
+#define BMI160_REG_CMD 0x7E
+#define BMI160_CMD_ACCEL_PM_SUSPEND 0x10
+#define BMI160_CMD_ACCEL_PM_NORMAL 0x11
+#define BMI160_CMD_ACCEL_PM_LOW_POWER 0x12
+#define BMI160_CMD_GYRO_PM_SUSPEND 0x14
+#define BMI160_CMD_GYRO_PM_NORMAL 0x15
+#define BMI160_CMD_GYRO_PM_FAST_STARTUP 0x17
+#define BMI160_CMD_SOFTRESET 0xB6
+
+#define BMI160_REG_DUMMY 0x7F
+
+#define BMI160_ACCEL_PMU_MIN_USLEEP 3200
+#define BMI160_ACCEL_PMU_MAX_USLEEP 3800
+#define BMI160_GYRO_PMU_MIN_USLEEP 55000
+#define BMI160_GYRO_PMU_MAX_USLEEP 80000
+#define BMI160_SOFTRESET_USLEEP 1000
+
+#define BMI160_CHANNEL(_type, _axis, _index) { \
+ .type = _type, \
+ .modified = 1, \
+ .channel2 = IIO_MOD_##_axis, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+ .scan_index = _index, \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = 16, \
+ .storagebits = 16, \
+ .endianness = IIO_LE, \
+ }, \
+}
+
+/* scan indexes follow DATA register order */
+enum bmi160_scan_axis {
+ BMI160_SCAN_EXT_MAGN_X = 0,
+ BMI160_SCAN_EXT_MAGN_Y,
+ BMI160_SCAN_EXT_MAGN_Z,
+ BMI160_SCAN_RHALL,
+ BMI160_SCAN_GYRO_X,
+ BMI160_SCAN_GYRO_Y,
+ BMI160_SCAN_GYRO_Z,
+ BMI160_SCAN_ACCEL_X,
+ BMI160_SCAN_ACCEL_Y,
+ BMI160_SCAN_ACCEL_Z,
+ BMI160_SCAN_TIMESTAMP,
+};
+
+enum bmi160_sensor_type {
+ BMI160_ACCEL = 0,
+ BMI160_GYRO,
+ BMI160_EXT_MAGN,
+ BMI160_NUM_SENSORS /* must be last */
+};
+
+struct bmi160_data {
+ struct regmap *regmap;
+};
+
+const struct regmap_config bmi160_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+EXPORT_SYMBOL(bmi160_regmap_config);
+
+struct bmi160_regs {
+ u8 data; /* LSB byte register for X-axis */
+ u8 config;
+ u8 config_odr_mask;
+ u8 config_bwp_mask;
+ u8 range;
+ u8 pmu_cmd_normal;
+ u8 pmu_cmd_suspend;
+};
+
+struct bmi160_regs bmi160_regs[] = {
+ [BMI160_ACCEL] = {
+ .data = BMI160_REG_DATA_ACCEL_XOUT_L,
+ .config = BMI160_REG_ACCEL_CONFIG,
+ .config_odr_mask = BMI160_ACCEL_CONFIG_ODR_MASK,
+ .config_bwp_mask = BMI160_ACCEL_CONFIG_BWP_MASK,
+ .range = BMI160_REG_ACCEL_RANGE,
+ .pmu_cmd_normal = BMI160_CMD_ACCEL_PM_NORMAL,
+ .pmu_cmd_suspend = BMI160_CMD_ACCEL_PM_SUSPEND,
+ },
+ [BMI160_GYRO] = {
+ .data = BMI160_REG_DATA_GYRO_XOUT_L,
+ .config = BMI160_REG_GYRO_CONFIG,
+ .config_odr_mask = BMI160_GYRO_CONFIG_ODR_MASK,
+ .config_bwp_mask = BMI160_GYRO_CONFIG_BWP_MASK,
+ .range = BMI160_REG_GYRO_RANGE,
+ .pmu_cmd_normal = BMI160_CMD_GYRO_PM_NORMAL,
+ .pmu_cmd_suspend = BMI160_CMD_GYRO_PM_SUSPEND,
+ },
+};
+
+struct bmi160_pmu_time {
+ unsigned long min;
+ unsigned long max;
+};
+
+struct bmi160_pmu_time bmi160_pmu_time[] = {
+ [BMI160_ACCEL] = {
+ .min = BMI160_ACCEL_PMU_MIN_USLEEP,
+ .max = BMI160_ACCEL_PMU_MAX_USLEEP
+ },
+ [BMI160_GYRO] = {
+ .min = BMI160_GYRO_PMU_MIN_USLEEP,
+ .max = BMI160_GYRO_PMU_MIN_USLEEP,
+ },
+};
+
+struct bmi160_scale {
+ u8 bits;
+ int uscale;
+};
+
+struct bmi160_odr {
+ u8 bits;
+ int odr;
+ int uodr;
+};
+
+static const struct bmi160_scale bmi160_accel_scale[] = {
+ { BMI160_ACCEL_RANGE_2G, 598},
+ { BMI160_ACCEL_RANGE_4G, 1197},
+ { BMI160_ACCEL_RANGE_8G, 2394},
+ { BMI160_ACCEL_RANGE_16G, 4788},
+};
+
+static const struct bmi160_scale bmi160_gyro_scale[] = {
+ { BMI160_GYRO_RANGE_2000DPS, 1065},
+ { BMI160_GYRO_RANGE_1000DPS, 532},
+ { BMI160_GYRO_RANGE_500DPS, 266},
+ { BMI160_GYRO_RANGE_250DPS, 133},
+ { BMI160_GYRO_RANGE_125DPS, 66},
+};
+
+struct bmi160_scale_item {
+ const struct bmi160_scale *tbl;
+ int num;
+};
+
+static const struct bmi160_scale_item bmi160_scale_table[] = {
+ [BMI160_ACCEL] = {
+ .tbl = bmi160_accel_scale,
+ .num = ARRAY_SIZE(bmi160_accel_scale),
+ },
+ [BMI160_GYRO] = {
+ .tbl = bmi160_gyro_scale,
+ .num = ARRAY_SIZE(bmi160_gyro_scale),
+ },
+};
+
+static const struct bmi160_odr bmi160_accel_odr[] = {
+ {0x01, 0, 78125},
+ {0x02, 1, 5625},
+ {0x03, 3, 125},
+ {0x04, 6, 25},
+ {0x05, 12, 5},
+ {0x06, 25, 0},
+ {0x07, 50, 0},
+ {0x08, 100, 0},
+ {0x09, 200, 0},
+ {0x0A, 400, 0},
+ {0x0B, 800, 0},
+ {0x0C, 1600, 0},
+};
+
+static const struct bmi160_odr bmi160_gyro_odr[] = {
+ {0x06, 25, 0},
+ {0x07, 50, 0},
+ {0x08, 100, 0},
+ {0x09, 200, 0},
+ {0x0A, 400, 0},
+ {0x0B, 8000, 0},
+ {0x0C, 1600, 0},
+ {0x0D, 3200, 0},
+};
+
+struct bmi160_odr_item {
+ const struct bmi160_odr *tbl;
+ int num;
+};
+
+static const struct bmi160_odr_item bmi160_odr_table[] = {
+ [BMI160_ACCEL] = {
+ .tbl = bmi160_accel_odr,
+ .num = ARRAY_SIZE(bmi160_accel_odr),
+ },
+ [BMI160_GYRO] = {
+ .tbl = bmi160_gyro_odr,
+ .num = ARRAY_SIZE(bmi160_gyro_odr),
+ },
+};
+
+static const struct iio_chan_spec bmi160_channels[] = {
+ BMI160_CHANNEL(IIO_ACCEL, X, BMI160_SCAN_ACCEL_X),
+ BMI160_CHANNEL(IIO_ACCEL, Y, BMI160_SCAN_ACCEL_Y),
+ BMI160_CHANNEL(IIO_ACCEL, Z, BMI160_SCAN_ACCEL_Z),
+ BMI160_CHANNEL(IIO_ANGL_VEL, X, BMI160_SCAN_GYRO_X),
+ BMI160_CHANNEL(IIO_ANGL_VEL, Y, BMI160_SCAN_GYRO_Y),
+ BMI160_CHANNEL(IIO_ANGL_VEL, Z, BMI160_SCAN_GYRO_Z),
+ IIO_CHAN_SOFT_TIMESTAMP(BMI160_SCAN_TIMESTAMP),
+};
+
+static enum bmi160_sensor_type bmi160_to_sensor(enum iio_chan_type iio_type)
+{
+ switch (iio_type) {
+ case IIO_ACCEL:
+ return BMI160_ACCEL;
+ case IIO_ANGL_VEL:
+ return BMI160_GYRO;
+ default:
+ return -EINVAL;
+ }
+}
+
+static
+int bmi160_set_mode(struct bmi160_data *data, enum bmi160_sensor_type t,
+ bool mode)
+{
+ int ret;
+ u8 cmd;
+
+ if (mode)
+ cmd = bmi160_regs[t].pmu_cmd_normal;
+ else
+ cmd = bmi160_regs[t].pmu_cmd_suspend;
+
+ ret = regmap_write(data->regmap, BMI160_REG_CMD, cmd);
+ if (ret < 0)
+ return ret;
+
+ usleep_range(bmi160_pmu_time[t].min, bmi160_pmu_time[t].max);
+
+ return 0;
+}
+
+static
+int bmi160_set_scale(struct bmi160_data *data, enum bmi160_sensor_type t,
+ int uscale)
+{
+ int i;
+
+ for (i = 0; i < bmi160_scale_table[t].num; i++)
+ if (bmi160_scale_table[t].tbl[i].uscale == uscale)
+ break;
+
+ if (i == bmi160_scale_table[t].num)
+ return -EINVAL;
+
+ return regmap_write(data->regmap, bmi160_regs[t].range,
+ bmi160_scale_table[t].tbl[i].bits);
+}
+
+static
+int bmi160_get_scale(struct bmi160_data *data, enum bmi160_sensor_type t,
+ int *uscale)
+{
+ int i, ret, val;
+
+ ret = regmap_read(data->regmap, bmi160_regs[t].range, &val);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < bmi160_scale_table[t].num; i++)
+ if (bmi160_scale_table[t].tbl[i].bits == val) {
+ *uscale = bmi160_scale_table[t].tbl[i].uscale;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static int bmi160_get_data(struct bmi160_data *data, int chan_type,
+ int axis, int *val)
+{
+ u8 reg;
+ int ret;
+ __le16 sample;
+ enum bmi160_sensor_type t = bmi160_to_sensor(chan_type);
+
+ reg = bmi160_regs[t].data + (axis - IIO_MOD_X) * sizeof(__le16);
+
+ ret = regmap_bulk_read(data->regmap, reg, &sample, sizeof(__le16));
+ if (ret < 0)
+ return ret;
+
+ *val = sign_extend32(le16_to_cpu(sample), 15);
+
+ return 0;
+}
+
+static
+int bmi160_set_odr(struct bmi160_data *data, enum bmi160_sensor_type t,
+ int odr, int uodr)
+{
+ int i;
+
+ for (i = 0; i < bmi160_odr_table[t].num; i++)
+ if (bmi160_odr_table[t].tbl[i].odr == odr &&
+ bmi160_odr_table[t].tbl[i].uodr == uodr)
+ break;
+
+ if (i >= bmi160_odr_table[t].num)
+ return -EINVAL;
+
+ return regmap_update_bits(data->regmap,
+ bmi160_regs[t].config,
+ bmi160_odr_table[t].tbl[i].bits,
+ bmi160_regs[t].config_odr_mask);
+}
+
+static int bmi160_get_odr(struct bmi160_data *data, enum bmi160_sensor_type t,
+ int *odr, int *uodr)
+{
+ int i, val, ret;
+
+ ret = regmap_read(data->regmap, bmi160_regs[t].config, &val);
+ if (ret < 0)
+ return ret;
+
+ val &= bmi160_regs[t].config_odr_mask;
+
+ for (i = 0; i < bmi160_odr_table[t].num; i++)
+ if (val == bmi160_odr_table[t].tbl[i].bits)
+ break;
+
+ if (i >= bmi160_odr_table[t].num)
+ return -EINVAL;
+
+ *odr = bmi160_odr_table[t].tbl[i].odr;
+ *uodr = bmi160_odr_table[t].tbl[i].uodr;
+
+ return 0;
+}
+
+static irqreturn_t bmi160_trigger_handler(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct bmi160_data *data = iio_priv(indio_dev);
+ s16 buf[16]; /* 3 sens x 3 axis x s16 + 3 x s16 pad + 4 x s16 tstamp */
+ int i, ret, sample, j = 0, base = BMI160_REG_DATA_MAGN_XOUT_L;
+
+ for_each_set_bit(i, indio_dev->active_scan_mask,
+ indio_dev->masklength) {
+ ret = regmap_bulk_read(data->regmap, base + i * sizeof(__le16),
+ &sample, sizeof(__le16));
+ if (ret < 0)
+ goto done;
+ buf[j++] = sample;
+ }
+
+ iio_push_to_buffers_with_timestamp(indio_dev, buf, iio_get_time_ns());
+done:
+ iio_trigger_notify_done(indio_dev->trig);
+ return IRQ_HANDLED;
+}
+
+static int bmi160_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ int ret;
+ struct bmi160_data *data = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ ret = bmi160_get_data(data, chan->type, chan->channel2, val);
+ if (ret < 0)
+ return ret;
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ *val = 0;
+ ret = bmi160_get_scale(data,
+ bmi160_to_sensor(chan->type), val2);
+ return ret < 0 ? ret : IIO_VAL_INT_PLUS_MICRO;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ ret = bmi160_get_odr(data, bmi160_to_sensor(chan->type),
+ val, val2);
+ return ret < 0 ? ret : IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int bmi160_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct bmi160_data *data = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ return bmi160_set_scale(data,
+ bmi160_to_sensor(chan->type), val2);
+ break;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ return bmi160_set_odr(data, bmi160_to_sensor(chan->type),
+ val, val2);
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const struct iio_info bmi160_info = {
+ .driver_module = THIS_MODULE,
+ .read_raw = bmi160_read_raw,
+ .write_raw = bmi160_write_raw,
+};
+
+static const char *bmi160_match_acpi_device(struct device *dev)
+{
+ const struct acpi_device_id *id;
+
+ id = acpi_match_device(dev->driver->acpi_match_table, dev);
+ if (!id)
+ return NULL;
+
+ return dev_name(dev);
+}
+
+static int bmi160_chip_init(struct bmi160_data *data, bool use_spi)
+{
+ int ret;
+ unsigned int val;
+ struct device *dev = regmap_get_device(data->regmap);
+
+ ret = regmap_write(data->regmap, BMI160_REG_CMD, BMI160_CMD_SOFTRESET);
+ if (ret < 0)
+ return ret;
+
+ usleep_range(BMI160_SOFTRESET_USLEEP, BMI160_SOFTRESET_USLEEP + 1);
+
+ /* CS rising edge is needed before starting SPI, so do a dummy read
+ * See Section 3.2.1, page 86 of the datasheet
+ */
+ if (use_spi) {
+ ret = regmap_read(data->regmap, BMI160_REG_DUMMY, &val);
+ if (ret < 0)
+ return ret;
+ }
+
+ ret = regmap_read(data->regmap, BMI160_REG_CHIP_ID, &val);
+ if (ret < 0) {
+ dev_err(dev, "Error reading chip id\n");
+ return ret;
+ }
+ if (val != BMI160_CHIP_ID_VAL) {
+ dev_err(dev, "Wrong chip id, got %x expected %x\n",
+ val, BMI160_CHIP_ID_VAL);
+ return -ENODEV;
+ }
+
+ ret = bmi160_set_mode(data, BMI160_ACCEL, true);
+ if (ret < 0)
+ return ret;
+
+ ret = bmi160_set_mode(data, BMI160_GYRO, true);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static void bmi160_chip_uninit(struct bmi160_data *data)
+{
+ bmi160_set_mode(data, BMI160_GYRO, false);
+ bmi160_set_mode(data, BMI160_ACCEL, false);
+}
+
+int bmi160_core_probe(struct device *dev, struct regmap *regmap,
+ const char *name, bool use_spi)
+{
+ struct iio_dev *indio_dev;
+ struct bmi160_data *data;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ data = iio_priv(indio_dev);
+ dev_set_drvdata(dev, indio_dev);
+ data->regmap = regmap;
+
+ ret = bmi160_chip_init(data, use_spi);
+ if (ret < 0)
+ return ret;
+
+ if (!name && ACPI_HANDLE(dev))
+ name = bmi160_match_acpi_device(dev);
+
+ indio_dev->dev.parent = dev;
+ indio_dev->channels = bmi160_channels;
+ indio_dev->num_channels = ARRAY_SIZE(bmi160_channels);
+ indio_dev->name = name;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->info = &bmi160_info;
+
+ ret = iio_triggered_buffer_setup(indio_dev, NULL,
+ bmi160_trigger_handler, NULL);
+ if (ret < 0)
+ goto uninit;
+
+ ret = iio_device_register(indio_dev);
+ if (ret < 0)
+ goto buffer_cleanup;
+
+ return 0;
+uninit:
+ bmi160_chip_uninit(data);
+buffer_cleanup:
+ iio_triggered_buffer_cleanup(indio_dev);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(bmi160_core_probe);
+
+void bmi160_core_remove(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct bmi160_data *data = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+ iio_triggered_buffer_cleanup(indio_dev);
+ bmi160_chip_uninit(data);
+}
+EXPORT_SYMBOL_GPL(bmi160_core_remove);
+
+MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com");
+MODULE_DESCRIPTION("Bosch BMI160 driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/imu/bmi160/bmi160_i2c.c b/drivers/iio/imu/bmi160/bmi160_i2c.c
new file mode 100644
index 0000000..e53e887
--- /dev/null
+++ b/drivers/iio/imu/bmi160/bmi160_i2c.c
@@ -0,0 +1,71 @@
+/*
+ * BMI160 - Bosch IMU, I2C bits
+ *
+ * Copyright (c) 2016, Intel Corporation.
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License. See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * 7-bit I2C slave address is:
+ * - 0x68 if SDO is pulled to GND
+ * - 0x69 if SDO is pulled to VDDIO
+ */
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/acpi.h>
+
+#include "bmi160.h"
+
+static int bmi160_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct regmap *regmap;
+ const char *name = NULL;
+
+ regmap = devm_regmap_init_i2c(client, &bmi160_regmap_config);
+ if (IS_ERR(regmap)) {
+ dev_err(&client->dev, "Failed to register i2c regmap %d\n",
+ (int)PTR_ERR(regmap));
+ return PTR_ERR(regmap);
+ }
+
+ if (id)
+ name = id->name;
+
+ return bmi160_core_probe(&client->dev, regmap, name, false);
+}
+
+static int bmi160_i2c_remove(struct i2c_client *client)
+{
+ bmi160_core_remove(&client->dev);
+
+ return 0;
+}
+
+static const struct i2c_device_id bmi160_i2c_id[] = {
+ {"bmi160", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, bmi160_i2c_id);
+
+static const struct acpi_device_id bmi160_acpi_match[] = {
+ {"BMI0160", 0},
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, bmi160_acpi_match);
+
+static struct i2c_driver bmi160_i2c_driver = {
+ .driver = {
+ .name = "bmi160_i2c",
+ .acpi_match_table = ACPI_PTR(bmi160_acpi_match),
+ },
+ .probe = bmi160_i2c_probe,
+ .remove = bmi160_i2c_remove,
+ .id_table = bmi160_i2c_id,
+};
+module_i2c_driver(bmi160_i2c_driver);
+
+MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com>");
+MODULE_DESCRIPTION("BMI160 I2C driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/imu/bmi160/bmi160_spi.c b/drivers/iio/imu/bmi160/bmi160_spi.c
new file mode 100644
index 0000000..9572aeb
--- /dev/null
+++ b/drivers/iio/imu/bmi160/bmi160_spi.c
@@ -0,0 +1,62 @@
+/*
+ * BMI160 - Bosch IMU, SPI bits
+ *
+ * Copyright (c) 2016, Intel Corporation.
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License. See the file COPYING in the main
+ * directory of this archive for more details.
+ */
+#include <linux/spi/spi.h>
+#include <linux/regmap.h>
+#include <linux/acpi.h>
+
+#include "bmi160.h"
+
+static int bmi160_spi_probe(struct spi_device *spi)
+{
+ struct regmap *regmap;
+ const struct spi_device_id *id = spi_get_device_id(spi);
+
+ regmap = devm_regmap_init_spi(spi, &bmi160_regmap_config);
+ if (IS_ERR(regmap)) {
+ dev_err(&spi->dev, "Failed to register spi regmap %d\n",
+ (int)PTR_ERR(regmap));
+ return PTR_ERR(regmap);
+ }
+ return bmi160_core_probe(&spi->dev, regmap, id->name, true);
+}
+
+static int bmi160_spi_remove(struct spi_device *spi)
+{
+ bmi160_core_remove(&spi->dev);
+
+ return 0;
+}
+
+static const struct spi_device_id bmi160_spi_id[] = {
+ {"bmi160", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(spi, bmi160_spi_id);
+
+static const struct acpi_device_id bmi160_acpi_match[] = {
+ {"BMI0160", 0},
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, bmi160_acpi_match);
+
+static struct spi_driver bmi160_spi_driver = {
+ .probe = bmi160_spi_probe,
+ .remove = bmi160_spi_remove,
+ .id_table = bmi160_spi_id,
+ .driver = {
+ .acpi_match_table = ACPI_PTR(bmi160_acpi_match),
+ .name = "bmi160_spi",
+ },
+};
+module_spi_driver(bmi160_spi_driver);
+
+MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com");
+MODULE_DESCRIPTION("Bosch BMI160 SPI driver");
+MODULE_LICENSE("GPL v2");
--
2.5.0
\
 
 \ /
  Last update: 2016-04-05 18:01    [W:0.057 / U:0.608 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site