lkml.org 
[lkml]   [2016]   [Apr]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] clk: bcm2835: Fix PLL poweron
Date
In poweroff, we set the reset bit and the power down bit, but only
managed to unset the reset bit for poweron. This meant that if HDMI
did -EPROBE_DEFER after it had grabbed its clocks, we'd power down the
PLLH (that had been on at boot time) and never recover.

Signed-off-by: Eric Anholt <eric@anholt.net>
Cc: stable@vger.kernel.org
---
drivers/clk/bcm/clk-bcm2835.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index 87616de..7a79708 100644
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -554,6 +554,10 @@ static int bcm2835_pll_on(struct clk_hw *hw)
const struct bcm2835_pll_data *data = pll->data;
ktime_t timeout;

+ cprman_write(cprman, data->a2w_ctrl_reg,
+ cprman_read(cprman, data->a2w_ctrl_reg) &
+ ~A2W_PLL_CTRL_PWRDN);
+
/* Take the PLL out of reset. */
cprman_write(cprman, data->cm_ctrl_reg,
cprman_read(cprman, data->cm_ctrl_reg) & ~CM_PLL_ANARST);
--
2.7.0
\
 
 \ /
  Last update: 2016-04-05 05:41    [W:1.404 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site