lkml.org 
[lkml]   [2016]   [Apr]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 01/13] USB: ch341: fix error handling on resume
On Fri, Apr 15, 2016 at 11:14:04PM +0200, Grigori Goronzy wrote:
> This may fail, do not assume it always works.
>
> Signed-off-by: Grigori Goronzy <greg@chown.ath.cx>
> ---
> drivers/usb/serial/ch341.c | 4 +---
> 1 file changed, 1 insertion(+), 3 deletions(-)
>
> diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
> index c73808f..63df8ce 100644
> --- a/drivers/usb/serial/ch341.c
> +++ b/drivers/usb/serial/ch341.c
> @@ -544,9 +544,7 @@ static int ch341_reset_resume(struct usb_serial *serial)
> priv = usb_get_serial_port_data(serial->port[0]);
>
> /* reconfigure ch341 serial port after bus-reset */
> - ch341_configure(serial->dev, priv);
> -
> - return 0;
> + return ch341_configure(serial->dev, priv);

This is correct, but have noticed that resume is currently broken in
that the interrupt urb is never resubmitted on resume in case the port is
already open?

Also ch341_configure must not use GFP_KERNEL either if called from a
resume path (use GFP_NOIO).

Care to fix this up as well?

> }
>
> static struct usb_serial_driver ch341_device = {

Thanks,
Johan

\
 
 \ /
  Last update: 2016-04-29 14:41    [W:0.140 / U:0.428 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site