lkml.org 
[lkml]   [2016]   [Apr]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 10/21] X86_64, UV: Create per cpu info structs to replace per hub info structs
The major portion of the hub info is common to all cpus on that hub.
This is step one of moving the per cpu hub info to a per node hub info
struct. This patch creates the small per cpu info struct that will
contain only information specific to each CPU.

Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Dimitri Sivanich <sivanich@sgi.com>
Tested-by: John Estabrook <estabrook@sgi.com>
Tested-by: Gary Kroening <gfk@sgi.com>
Tested-by: Nathan Zimmer <nzimmer@sgi.com>
---
arch/x86/include/asm/uv/uv_hub.h | 19 +++++++++++++++----
arch/x86/kernel/apic/x2apic_uv_x.c | 15 ++++++++++-----
2 files changed, 25 insertions(+), 9 deletions(-)

--- linux.orig/arch/x86/include/asm/uv/uv_hub.h
+++ linux/arch/x86/include/asm/uv/uv_hub.h
@@ -139,8 +139,9 @@ struct uv_scir_s {

/*
* The following defines attributes of the HUB chip. These attributes are
- * frequently referenced and are kept in the per-cpu data areas of each cpu.
- * They are kept together in a struct to minimize cache misses.
+ * frequently referenced and are kept in a common per hub struct.
+ * After setup, the struct is read only, so it should be readily
+ * available in the L3 cache on the cpu socket for the node.
*/
struct uv_hub_info_s {
unsigned long global_mmr_base;
@@ -167,9 +168,19 @@ DECLARE_PER_CPU(struct uv_hub_info_s, __
#define uv_hub_info this_cpu_ptr(&__uv_hub_info)
#define uv_cpu_hub_info(cpu) (&per_cpu(__uv_hub_info, cpu))

+/* CPU specific info with a pointer to the hub common info struct */
+struct uv_cpu_info_s {
+ void *p_uv_hub_info;
+ unsigned char blade_cpu_id;
+ struct uv_scir_s scir;
+};
+DECLARE_PER_CPU(struct uv_cpu_info_s, __uv_cpu_info);
+
+#define uv_cpu_info this_cpu_ptr(&__uv_cpu_info)
+#define uv_cpu_info_per(cpu) (&per_cpu(__uv_cpu_info, cpu))
+
/*
- * Hub revisions less than UV2_HUB_REVISION_BASE are UV1 hubs. All UV2
- * hubs have revision numbers greater than or equal to UV2_HUB_REVISION_BASE.
+ * HUB revision ranges for each UV HUB architecture.
* This is a software convention - NOT the hardware revision numbers in
* the hub chip.
*/
--- linux.orig/arch/x86/kernel/apic/x2apic_uv_x.c
+++ linux/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -238,6 +238,9 @@ EXPORT_SYMBOL_GPL(is_uv_system);
DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info);

+DEFINE_PER_CPU(struct uv_cpu_info_s, __uv_cpu_info);
+EXPORT_PER_CPU_SYMBOL_GPL(__uv_cpu_info);
+
struct uv_blade_info *uv_blade_info;
EXPORT_SYMBOL_GPL(uv_blade_info);

@@ -1010,11 +1013,10 @@ void __init uv_system_init(void)
hweight64(uv_read_local_mmr( UVH_NODE_PRESENT_TABLE + i * 8));

/* uv_num_possible_blades() is really the hub count */
- pr_info("UV: Found %d blades, %d hubs\n",
- is_uv1_hub() ?
- uv_num_possible_blades() :
- (uv_num_possible_blades() + 1) / 2,
- uv_num_possible_blades());
+ pr_info("UV: Found %d hubs, %d nodes, %d cpus\n",
+ uv_num_possible_blades(),
+ num_possible_nodes(),
+ num_possible_cpus());

bytes = sizeof(struct uv_blade_info) * uv_num_possible_blades();
uv_blade_info = kzalloc(bytes, GFP_KERNEL);
@@ -1077,6 +1079,9 @@ void __init uv_system_init(void)
uv_cpu_hub_info(cpu)->blade_processor_id = lcpu;
uv_node_to_blade[nodeid] = blade;
uv_cpu_to_blade[cpu] = blade;
+
+ /* Initialize per cpu info list */
+ uv_cpu_info_per(cpu)->p_uv_hub_info = uv_cpu_hub_info(cpu);
}

/* Add blade/pnode info for nodes without cpus */
--

\
 
 \ /
  Last update: 2016-04-29 01:41    [W:0.084 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site