lkml.org 
[lkml]   [2016]   [Apr]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH V10 2/6] mfd: max77620: add core driver for MAX77620/MAX20024
On Wed, 30 Mar 2016, Laxman Dewangan wrote:

> MAX77620/MAX20024 are Power Management IC from the MAXIM.
> It supports RTC, multiple GPIOs, multiple DCDC and LDOs,
> watchdog, clock etc.
>
> Add MFD drier to provides common support for accessing the
> device; additional drivers is developed on respected subsystem
> in order to use the functionality of the device.
>
> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
> Signed-off-by: Mallikarjun Kasoju <mkasoju@nvidia.com>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
>
> ---
> Changes from V1:
> - Code cleanups per review from V1.
> - Move register acccess APIs from header to c file.
> - Remove some of non required variable, remove duplication in error message
> and simplify some of function implementation.
> - Register RTC driver such that it can get the regmap handle form parent device
>
> Changes from V2:
> - Run coccicheck and checkpatch in strict mode for the alignment.
> - Drop RTC driver and its i2c client registration.
>
> Changes from V3:
> - Change all sys initcall to module driver.
> - change the max77620_read argument to unisgned int from u8.
>
> Changes from V4:
> - Take care of fps nodes.
> - Drop the battery charger and low battery binding and related code as
> it need to go on power driver.
>
> Changes from V5:
> -None
>
> Changes from V6:
> - Taken care of Lee's comment like used defines for irqs, remove max77620
> register accesss abstractions, remove DTof module and use ID table only,
> reduce the copyright lines.
> - Drop configuration for hard power off time chnage as it will be in
> power driver.
> - Use direct regmap from all drivers instead of using abstractions.
> - This depends on patch
>
> Change from V7:
> - Use MFD defines for making mfd cells.
> - Use new property name.
>
> Changes from V8:
> - Remove the usage of MFD defines. Remove mutex_config as not needed.
>
> Changes from V9:
> - Use the devm_regmap_add_irq_chip() for irq registration.
>
> drivers/mfd/Kconfig | 15 ++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/max77620.c | 544 +++++++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/max77620.h | 337 +++++++++++++++++++++++++++
> 4 files changed, 897 insertions(+)
> create mode 100644 drivers/mfd/max77620.c
> create mode 100644 include/linux/mfd/max77620.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index eea61e3..585d6e3 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -527,6 +527,21 @@ config MFD_MAX14577
> additional drivers must be enabled in order to use the functionality
> of the device.
>
> +config MFD_MAX77620
> + bool "Maxim Semiconductor MAX77620 and MAX20024 PMIC Support"
> + depends on I2C=y
> + depends on OF
> + select MFD_CORE
> + select REGMAP_I2C
> + select REGMAP_IRQ
> + select IRQ_DOMAIN
> + help
> + Say yes here to add support for Maxim Semiconductor MAX77620 and
> + MAX20024 which are Power Management IC with General purpose pins,
> + RTC, regulators, clock generator, watchdog etc. This driver
> + provides common support for accessing the device; additional drivers
> + must be enabled in order to use the functionality of the device.
> +
> config MFD_MAX77686
> tristate "Maxim Semiconductor MAX77686/802 PMIC Support"
> depends on I2C
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 5eaa6465d..921a08d 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -128,6 +128,7 @@ obj-$(CONFIG_MFD_DA9063) += da9063.o
> obj-$(CONFIG_MFD_DA9150) += da9150-core.o
>
> obj-$(CONFIG_MFD_MAX14577) += max14577.o
> +obj-$(CONFIG_MFD_MAX77620) += max77620.o
> obj-$(CONFIG_MFD_MAX77686) += max77686.o
> obj-$(CONFIG_MFD_MAX77693) += max77693.o
> obj-$(CONFIG_MFD_MAX77843) += max77843.o
> diff --git a/drivers/mfd/max77620.c b/drivers/mfd/max77620.c
> new file mode 100644
> index 0000000..41daaf7
> --- /dev/null
> +++ b/drivers/mfd/max77620.c
> @@ -0,0 +1,544 @@
> +/*
> + * Maxim MAX77620 MFD Driver
> + *
> + * Copyright (C) 2016 NVIDIA CORPORATION. All rights reserved.
> + *
> + * Author:
> + * Laxman Dewangan <ldewangan@nvidia.com>
> + * Chaitanya Bandi <bandik@nvidia.com>
> + * Mallikarjun Kasoju <mkasoju@nvidia.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/max77620.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +
> +static struct resource gpio_resources[] = {
> + DEFINE_RES_IRQ(MAX77620_IRQ_TOP_GPIO),
> +};
> +
> +static struct resource power_resources[] = {
> + DEFINE_RES_IRQ(MAX77620_IRQ_LBT_MBATLOW),
> +};
> +
> +static struct resource rtc_resources[] = {
> + DEFINE_RES_IRQ(MAX77620_IRQ_TOP_RTC),
> +};
> +
> +static struct resource thermal_resources[] = {
> + DEFINE_RES_IRQ(MAX77620_IRQ_LBT_TJALRM1),
> + DEFINE_RES_IRQ(MAX77620_IRQ_LBT_TJALRM2),
> +};
> +
> +static const struct regmap_irq max77620_top_irqs[] = {
> + REGMAP_IRQ_REG(MAX77620_IRQ_TOP_GLBL, 0, MAX77620_IRQ_TOP_GLBL_MASK),
> + REGMAP_IRQ_REG(MAX77620_IRQ_TOP_SD, 0, MAX77620_IRQ_TOP_SD_MASK),
> + REGMAP_IRQ_REG(MAX77620_IRQ_TOP_LDO, 0, MAX77620_IRQ_TOP_LDO_MASK),
> + REGMAP_IRQ_REG(MAX77620_IRQ_TOP_GPIO, 0, MAX77620_IRQ_TOP_GPIO_MASK),
> + REGMAP_IRQ_REG(MAX77620_IRQ_TOP_RTC, 0, MAX77620_IRQ_TOP_RTC_MASK),
> + REGMAP_IRQ_REG(MAX77620_IRQ_TOP_32K, 0, MAX77620_IRQ_TOP_32K_MASK),
> + REGMAP_IRQ_REG(MAX77620_IRQ_TOP_ONOFF, 0, MAX77620_IRQ_TOP_ONOFF_MASK),
> + REGMAP_IRQ_REG(MAX77620_IRQ_LBT_MBATLOW, 1, MAX77620_IRQ_LBM_MASK),
> + REGMAP_IRQ_REG(MAX77620_IRQ_LBT_TJALRM1, 1, MAX77620_IRQ_TJALRM1_MASK),
> + REGMAP_IRQ_REG(MAX77620_IRQ_LBT_TJALRM2, 1, MAX77620_IRQ_TJALRM2_MASK),
> +};
> +
> +#define MAX77620_MFD_CELL_NAME(_name) \
> + { \
> + .name = (_name), \
> + }
> +
> +#define MAX77620_MFD_CELL_RES(_name, _res) \
> + { \
> + .name = (_name), \
> + .resources = (_res), \
> + .num_resources = ARRAY_SIZE((_res)), \
> + }

I'm *still* not accepting this.

> +static struct mfd_cell max77620_children[] = {
> + MAX77620_MFD_CELL_NAME("max77620-pinctrl"),
> + MAX77620_MFD_CELL_RES("max77620-gpio", gpio_resources),
> + MAX77620_MFD_CELL_NAME("max77620-pmic"),
> + MAX77620_MFD_CELL_RES("max77620-rtc", rtc_resources),
> + MAX77620_MFD_CELL_RES("max77620-power", power_resources),
> + MAX77620_MFD_CELL_NAME("max77620-watchdog"),
> + MAX77620_MFD_CELL_NAME("max77620-clock"),
> + MAX77620_MFD_CELL_RES("max77620-thermal", thermal_resources),
> +};
> +
> +static struct mfd_cell max20024_children[] = {
> + MAX77620_MFD_CELL_NAME("max20024-pinctrl"),
> + MAX77620_MFD_CELL_RES("max20024-gpio", gpio_resources),
> + MAX77620_MFD_CELL_NAME("max20024-pmic"),
> + MAX77620_MFD_CELL_RES("max77620-rtc", rtc_resources),
> + MAX77620_MFD_CELL_RES("max20024-power", power_resources),
> + MAX77620_MFD_CELL_NAME("max20024-watchdog"),
> + MAX77620_MFD_CELL_NAME("max20024-clock"),
> +};

If you want this submission to be accepted this cycle, you're going to
have to convert this to the traditional way of defining MFD children.

> +static struct regmap_irq_chip max77620_top_irq_chip = {
> + .name = "max77620-top",
> + .irqs = max77620_top_irqs,
> + .num_irqs = ARRAY_SIZE(max77620_top_irqs),
> + .num_regs = 2,
> + .status_base = MAX77620_REG_IRQTOP,
> + .mask_base = MAX77620_REG_IRQTOPM,
> +};
> +
> +static const struct regmap_range max77620_readable_ranges[] = {
> + regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_DVSSD4),
> +};
> +
> +static const struct regmap_access_table max77620_readable_table = {
> + .yes_ranges = max77620_readable_ranges,
> + .n_yes_ranges = ARRAY_SIZE(max77620_readable_ranges),
> +};
> +
> +static const struct regmap_range max20024_readable_ranges[] = {
> + regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_DVSSD4),
> + regmap_reg_range(MAX20024_REG_MAX_ADD, MAX20024_REG_MAX_ADD),
> +};
> +
> +static const struct regmap_access_table max20024_readable_table = {
> + .yes_ranges = max20024_readable_ranges,
> + .n_yes_ranges = ARRAY_SIZE(max20024_readable_ranges),
> +};
> +
> +static const struct regmap_range max77620_writable_ranges[] = {
> + regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_DVSSD4),
> +};
> +
> +static const struct regmap_access_table max77620_writable_table = {
> + .yes_ranges = max77620_writable_ranges,
> + .n_yes_ranges = ARRAY_SIZE(max77620_writable_ranges),
> +};
> +
> +static const struct regmap_range max77620_cacheable_ranges[] = {
> + regmap_reg_range(MAX77620_REG_SD0_CFG, MAX77620_REG_LDO_CFG3),
> + regmap_reg_range(MAX77620_REG_FPS_CFG0, MAX77620_REG_FPS_SD3),
> +};
> +
> +static const struct regmap_access_table max77620_volatile_table = {
> + .no_ranges = max77620_cacheable_ranges,
> + .n_no_ranges = ARRAY_SIZE(max77620_cacheable_ranges),
> +};
> +
> +static const struct regmap_config max77620_regmap_config = {
> + .name = "power-slave",
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = MAX77620_REG_DVSSD4 + 1,
> + .cache_type = REGCACHE_RBTREE,
> + .rd_table = &max77620_readable_table,
> + .wr_table = &max77620_writable_table,
> + .volatile_table = &max77620_volatile_table,
> +};
> +
> +static const struct regmap_config max20024_regmap_config = {
> + .name = "power-slave",
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = MAX20024_REG_MAX_ADD + 1,
> + .cache_type = REGCACHE_RBTREE,
> + .rd_table = &max20024_readable_table,
> + .wr_table = &max77620_writable_table,
> + .volatile_table = &max77620_volatile_table,
> +};
> +
> +static int max77620_get_fps_period_reg_value(struct max77620_chip *chip,
> + int tperiod)
> +{
> + int base_fps_time = (chip->chip_id == MAX20024) ? 20 : 40;

What are 20 and 40? I think you're going to need a comment to
describe what's going on in this function.

> + int x, i;
> +
> + for (i = 0; i < 0x7; i++) {

It's unsual to use hex values like this.

I think it should be defined.

> + x = base_fps_time * BIT(i);

20 * (1 << {0..7})

So ...

20 * (1, 2, 4, 8, etc)

What does that does that doe exactly?

> + if (x >= tperiod)
> + return i;
> + }
> +
> + return i;
> +}
> +
> +static int max77620_config_fps(struct max77620_chip *chip,
> + struct device_node *fps_np)

Lots of mention of 'FPS' here, but noting to so what that is?

What does FPS stand for and what does the FPS do?

> +{
> + struct device *dev = chip->dev;
> + unsigned int mask = 0, config = 0;
> + u32 param_val;
> + int tperiod, fps_id;
> + int ret;
> + char fps_name[10];
> +
> + for (fps_id = 0; fps_id < MAX77620_FPS_COUNT; fps_id++) {
> + sprintf(fps_name, "fps%d", fps_id);
> + if (!strcmp(fps_np->name, fps_name))
> + break;
> + }
> +
> + if (fps_id == MAX77620_FPS_COUNT) {
> + dev_err(dev, "FPS node name %s is not valid\n", fps_np->name);
> + return -EINVAL;
> + }
> +
> + ret = of_property_read_u32(fps_np, "maxim,shutdown-fps-time-period-us",
> + &param_val);
> + if (!ret) {
> + mask |= MAX77620_FPS_TIME_PERIOD_MASK;
> + chip->shutdown_fps_period[fps_id] = min(param_val, 5120U);

Please define all magic numbers.

> + tperiod = max77620_get_fps_period_reg_value(chip,
> + chip->shutdown_fps_period[fps_id]);
> + config |= tperiod << MAX77620_FPS_TIME_PERIOD_SHIFT;
> + }
> +
> + ret = of_property_read_u32(fps_np, "maxim,suspend-fps-time-period-us",
> + &param_val);
> + if (!ret)
> + chip->suspend_fps_period[fps_id] = min(param_val, 5120U);
> +
> + ret = of_property_read_u32(fps_np, "maxim,fps-event-source",
> + &param_val);
> + if (!ret) {
> + if (param_val > 2) {
> + dev_err(dev, "FPS%d event-source invalid\n", fps_id);
> + return -EINVAL;
> + }
> + mask |= MAX77620_FPS_EN_SRC_MASK;
> + config |= param_val << MAX77620_FPS_EN_SRC_SHIFT;
> + if (param_val == 2) {
> + mask |= MAX77620_FPS_ENFPS_SW_MASK;
> + config |= MAX77620_FPS_ENFPS_SW;
> + }
> + }
> +
> + if (!chip->sleep_enable && !chip->enable_global_lpm) {
> + ret = of_property_read_u32(fps_np,
> + "maxim,device-state-on-disabled-event",
> + &param_val);
> + if (!ret) {
> + if (param_val == 0)
> + chip->sleep_enable = true;
> + else if (param_val == 1)
> + chip->enable_global_lpm = true;
> + }
> + }
> +
> + ret = regmap_update_bits(chip->rmap, MAX77620_REG_FPS_CFG0 + fps_id,
> + mask, config);
> + if (ret < 0) {
> + dev_err(dev, "Failed to Reg 0x%02x update: %d\n",
> + MAX77620_REG_FPS_CFG0 + fps_id, ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int max77620_initialise_fps(struct max77620_chip *chip)
> +{
> + struct device *dev = chip->dev;
> + struct device_node *fps_np, *fps_child;
> + u8 config;
> + int fps_id;
> + int ret;
> +
> + for (fps_id = 0; fps_id < MAX77620_FPS_COUNT; fps_id++) {
> + chip->shutdown_fps_period[fps_id] = -1;
> + chip->suspend_fps_period[fps_id] = -1;
> + }
> +
> + fps_np = of_get_child_by_name(dev->of_node, "fps");
> + if (!fps_np)
> + goto skip_fps;
> +
> + for_each_child_of_node(fps_np, fps_child) {
> + ret = max77620_config_fps(chip, fps_child);
> + if (ret < 0)
> + return ret;
> + }
> +
> + config = chip->enable_global_lpm ? MAX77620_ONOFFCNFG2_SLP_LPM_MSK : 0;
> + ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2,
> + MAX77620_ONOFFCNFG2_SLP_LPM_MSK, config);
> + if (ret < 0) {
> + dev_err(dev, "Failed to reg ONOFFCNFG2 update: %d\n", ret);

This isn't very readable for your users.

Please issue a user friendly print instead.

> + return ret;
> + }
> +
> +skip_fps:
> + /* Enable wake on EN0 pin */
> + ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2,
> + MAX77620_ONOFFCNFG2_WK_EN0,
> + MAX77620_ONOFFCNFG2_WK_EN0);
> + if (ret < 0) {
> + dev_err(dev, "Failed to reg ONOFFCNFG2 update: %d\n", ret);

As above, and all the others below too.

> + return ret;
> + }
> +
> + /* For MAX20024, SLPEN will be POR reset if CLRSE is b11 */
> + if ((chip->chip_id == MAX20024) && chip->sleep_enable) {
> + config = MAX77620_ONOFFCNFG1_SLPEN | MAX20024_ONOFFCNFG1_CLRSE;
> + ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG1,
> + config, config);
> + if (ret < 0) {
> + dev_err(dev, "Failed to reg ONOFFCNFG1 update: %d\n",
> + ret);
> + return ret;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int max77620_read_es_version(struct max77620_chip *chip)
> +{
> + unsigned int val;
> + u8 cid_val[6];
> + int i;
> + int ret;
> +
> + for (i = MAX77620_REG_CID0; i <= MAX77620_REG_CID5; i++) {
> + ret = regmap_read(chip->rmap, i, &val);
> + if (ret < 0) {
> + dev_err(chip->dev, "Failed to reg CID%d read: %d\n",
> + i - MAX77620_REG_CID0, ret);
> + return ret;
> + }
> + dev_dbg(chip->dev, "CID%d: 0x%02x\n",
> + i - MAX77620_REG_CID0, val);
> + cid_val[i - MAX77620_REG_CID0] = val;
> + }
> +
> + /* CID4 is OTP Version and CID5 is ES version */
> + dev_info(chip->dev, "PMIC Version OTP:0x%02X and ES:0x%X\n",
> + cid_val[4], MAX77620_CID5_DIDM(cid_val[5]));
> +
> + return ret;
> +}
> +
> +static int max77620_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + const struct regmap_config *rmap_config;
> + struct max77620_chip *chip;
> + struct mfd_cell *mfd_cells;
> + int n_mfd_cells;
> + int ret;
> +
> + chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
> + if (!chip)
> + return -ENOMEM;
> +
> + i2c_set_clientdata(client, chip);
> + chip->dev = &client->dev;
> + chip->irq_base = -1;
> + chip->chip_irq = client->irq;
> + chip->chip_id = (enum max77620_chip_id)id->driver_data;
> +
> + switch (chip->chip_id) {
> + case MAX77620:
> + mfd_cells = max77620_children;
> + n_mfd_cells = ARRAY_SIZE(max77620_children);
> + rmap_config = &max77620_regmap_config;
> + break;
> + case MAX20024:
> + mfd_cells = max20024_children;
> + n_mfd_cells = ARRAY_SIZE(max20024_children);
> + rmap_config = &max20024_regmap_config;
> + break;
> + default:
> + dev_err(chip->dev, "ChipID is invalid %d\n", chip->chip_id);
> + return -EINVAL;
> + }
> +
> + chip->rmap = devm_regmap_init_i2c(client, rmap_config);
> + if (IS_ERR(chip->rmap)) {
> + ret = PTR_ERR(chip->rmap);
> + dev_err(chip->dev, "Failed to regmap init: %d\n", ret);
> + return ret;
> + }
> +
> + ret = max77620_read_es_version(chip);
> + if (ret < 0)
> + return ret;
> +
> + ret = devm_regmap_add_irq_chip(chip->dev, chip->rmap, client->irq,
> + IRQF_ONESHOT | IRQF_SHARED,
> + chip->irq_base, &max77620_top_irq_chip,
> + &chip->top_irq_data);
> + if (ret < 0) {
> + dev_err(chip->dev, "Failed to add regmap irq: %d\n", ret);
> + return ret;
> + }
> +
> + ret = max77620_initialise_fps(chip);
> + if (ret < 0)
> + return ret;
> +
> + ret = mfd_add_devices(chip->dev, PLATFORM_DEVID_NONE,
> + mfd_cells, n_mfd_cells, NULL, 0,
> + regmap_irq_get_domain(chip->top_irq_data));

Use new devm_*

> + if (ret < 0) {
> + dev_err(chip->dev, "Failed to add sub devices: %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int max77620_remove(struct i2c_client *client)
> +{
> + struct max77620_chip *chip = i2c_get_clientdata(client);
> +
> + mfd_remove_devices(chip->dev);
> +
> + return 0;
> +}

Remove .remove()

> +#ifdef CONFIG_PM_SLEEP
> +static int max77620_set_fps_period(struct max77620_chip *chip,
> + int fps_id, int time_period)
> +{
> + int period = max77620_get_fps_period_reg_value(chip, time_period);
> + int ret;
> +
> + ret = regmap_update_bits(chip->rmap, MAX77620_REG_FPS_CFG0 + fps_id,
> + MAX77620_FPS_TIME_PERIOD_MASK,
> + period << MAX77620_FPS_TIME_PERIOD_SHIFT);
> + if (ret < 0) {
> + dev_err(chip->dev, "Failed to reg 0x%02x write: %d\n",
> + MAX77620_REG_FPS_CFG0 + fps_id, ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int max77620_i2c_suspend(struct device *dev)
> +{
> + struct max77620_chip *chip = dev_get_drvdata(dev);
> + struct i2c_client *client = to_i2c_client(dev);
> + unsigned int config;
> + int fps;
> + int ret;
> +
> + for (fps = 0; fps < MAX77620_FPS_COUNT; fps++) {
> + if (chip->suspend_fps_period[fps] < 0)
> + continue;
> +
> + ret = max77620_set_fps_period(chip, fps,
> + chip->suspend_fps_period[fps]);
> + if (ret < 0)
> + dev_err(dev, "Failed to FPS%d config: %d\n", fps, ret);
> + }
> +
> + /*
> + * For MAX20024: No need to configure SLPEN on suspend as
> + * it will be configured on Init.
> + */
> + if (chip->chip_id == MAX20024)
> + goto out;
> +
> + config = (chip->sleep_enable) ? MAX77620_ONOFFCNFG1_SLPEN : 0;
> + ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG1,
> + MAX77620_ONOFFCNFG1_SLPEN,
> + config);
> + if (ret < 0) {
> + dev_err(dev, "Failed to reg ONOFFCNFG1 update: %d\n", ret);
> + return ret;
> + }
> +
> + /* Disable WK_EN0 */
> + ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2,
> + MAX77620_ONOFFCNFG2_WK_EN0, 0);
> + if (ret < 0) {
> + dev_err(dev, "Failed to reg ONOFFCNFG2 update: %d\n", ret);
> + return ret;
> + }
> +
> +out:
> + disable_irq(client->irq);
> +
> + return 0;
> +}
> +
> +static int max77620_i2c_resume(struct device *dev)
> +{
> + struct max77620_chip *chip = dev_get_drvdata(dev);
> + struct i2c_client *client = to_i2c_client(dev);
> + int ret;
> + int fps;
> +
> + for (fps = 0; fps < MAX77620_FPS_COUNT; fps++) {
> + if (chip->shutdown_fps_period[fps] < 0)
> + continue;
> +
> + ret = max77620_set_fps_period(chip, fps,
> + chip->shutdown_fps_period[fps]);
> + if (ret < 0)
> + dev_err(dev, "Failed to FPS%d config: %d\n", fps, ret);
> + }
> +
> + /*
> + * For MAX20024: No need to configure WKEN0 on resume as
> + * it is configured on Init.
> + */
> + if (chip->chip_id == MAX20024)
> + goto out;
> +
> + /* Enable WK_EN0 */
> + ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2,
> + MAX77620_ONOFFCNFG2_WK_EN0,
> + MAX77620_ONOFFCNFG2_WK_EN0);
> + if (ret < 0) {
> + dev_err(dev, "Failed to reg ONOFFCNFG2 WK_EN0 update: %d\n",
> + ret);
> + return ret;
> + }
> +
> +out:
> + enable_irq(client->irq);
> +
> + return 0;
> +}
> +#endif
> +
> +static const struct i2c_device_id max77620_id[] = {
> + {"max77620", MAX77620},
> + {"max20024", MAX20024},
> + {},
> +};
> +MODULE_DEVICE_TABLE(i2c, max77620_id);
> +
> +static const struct dev_pm_ops max77620_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(max77620_i2c_suspend, max77620_i2c_resume)
> +};
> +
> +static struct i2c_driver max77620_driver = {
> + .driver = {
> + .name = "max77620",
> + .pm = &max77620_pm_ops,
> + },
> + .probe = max77620_probe,
> + .remove = max77620_remove,
> + .id_table = max77620_id,
> +};
> +
> +module_i2c_driver(max77620_driver);
> +
> +MODULE_DESCRIPTION("MAX77620/MAX20024 Multi Function Device Core Driver");
> +MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
> +MODULE_AUTHOR("Chaitanya Bandi <bandik@nvidia.com>");
> +MODULE_AUTHOR("Mallikarjun Kasoju <mkasoju@nvidia.com>");
> +MODULE_ALIAS("i2c:max77620");

The I2C subsystem should do this for you.

> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/mfd/max77620.h b/include/linux/mfd/max77620.h
> new file mode 100644
> index 0000000..db34107
> --- /dev/null
> +++ b/include/linux/mfd/max77620.h
> @@ -0,0 +1,337 @@
> +/*
> + * Defining registers address and its bit definitions of MAX77620 and MAX20024
> + *
> + * Copyright (C) 2016 NVIDIA CORPORATION. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + */
> +
> +#ifndef _LINUX_MFD_MAX77620_H_
> +#define _LINUX_MFD_MAX77620_H_
Just drop the LINUX part.

> +#include <linux/types.h>
> +
> +/* GLOBAL, PMIC, GPIO, FPS, ONOFFC, CID Registers */
> +#define MAX77620_REG_CNFGGLBL1 0x00
> +#define MAX77620_REG_CNFGGLBL2 0x01
> +#define MAX77620_REG_CNFGGLBL3 0x02
> +#define MAX77620_REG_CNFG1_32K 0x03
> +#define MAX77620_REG_CNFGBBC 0x04
> +#define MAX77620_REG_IRQTOP 0x05
> +#define MAX77620_REG_INTLBT 0x06
> +#define MAX77620_REG_IRQSD 0x07
> +#define MAX77620_REG_IRQ_LVL2_L0_7 0x08
> +#define MAX77620_REG_IRQ_LVL2_L8 0x09
> +#define MAX77620_REG_IRQ_LVL2_GPIO 0x0A
> +#define MAX77620_REG_ONOFFIRQ 0x0B
> +#define MAX77620_REG_NVERC 0x0C
> +#define MAX77620_REG_IRQTOPM 0x0D
> +#define MAX77620_REG_INTENLBT 0x0E
> +#define MAX77620_REG_IRQMASKSD 0x0F
> +#define MAX77620_REG_IRQ_MSK_L0_7 0x10
> +#define MAX77620_REG_IRQ_MSK_L8 0x11
> +#define MAX77620_REG_ONOFFIRQM 0x12
> +#define MAX77620_REG_STATLBT 0x13
> +#define MAX77620_REG_STATSD 0x14
> +#define MAX77620_REG_ONOFFSTAT 0x15
> +
> +/* SD and LDO Registers */
> +#define MAX77620_REG_SD0 0x16
> +#define MAX77620_REG_SD1 0x17
> +#define MAX77620_REG_SD2 0x18
> +#define MAX77620_REG_SD3 0x19
> +#define MAX77620_REG_SD4 0x1A
> +#define MAX77620_REG_DVSSD0 0x1B
> +#define MAX77620_REG_DVSSD1 0x1C
> +#define MAX77620_REG_SD0_CFG 0x1D
> +#define MAX77620_REG_SD1_CFG 0x1E
> +#define MAX77620_REG_SD2_CFG 0x1F
> +#define MAX77620_REG_SD3_CFG 0x20
> +#define MAX77620_REG_SD4_CFG 0x21
> +#define MAX77620_REG_SD_CFG2 0x22
> +#define MAX77620_REG_LDO0_CFG 0x23
> +#define MAX77620_REG_LDO0_CFG2 0x24
> +#define MAX77620_REG_LDO1_CFG 0x25
> +#define MAX77620_REG_LDO1_CFG2 0x26
> +#define MAX77620_REG_LDO2_CFG 0x27
> +#define MAX77620_REG_LDO2_CFG2 0x28
> +#define MAX77620_REG_LDO3_CFG 0x29
> +#define MAX77620_REG_LDO3_CFG2 0x2A
> +#define MAX77620_REG_LDO4_CFG 0x2B
> +#define MAX77620_REG_LDO4_CFG2 0x2C
> +#define MAX77620_REG_LDO5_CFG 0x2D
> +#define MAX77620_REG_LDO5_CFG2 0x2E
> +#define MAX77620_REG_LDO6_CFG 0x2F
> +#define MAX77620_REG_LDO6_CFG2 0x30
> +#define MAX77620_REG_LDO7_CFG 0x31
> +#define MAX77620_REG_LDO7_CFG2 0x32
> +#define MAX77620_REG_LDO8_CFG 0x33
> +#define MAX77620_REG_LDO8_CFG2 0x34
> +#define MAX77620_REG_LDO_CFG3 0x35
> +
> +#define MAX77620_LDO_SLEW_RATE_MASK 0x1
> +
> +/* LDO Configuration 3 */
> +#define MAX77620_TRACK4_MASK BIT(5)
> +#define MAX77620_TRACK4_SHIFT 5
> +
> +/* Voltage */
> +#define MAX77620_SDX_VOLT_MASK 0xFF
> +#define MAX77620_SD0_VOLT_MASK 0x3F
> +#define MAX77620_SD1_VOLT_MASK 0x7F
> +#define MAX77620_LDO_VOLT_MASK 0x3F
> +
> +#define MAX77620_REG_GPIO0 0x36
> +#define MAX77620_REG_GPIO1 0x37
> +#define MAX77620_REG_GPIO2 0x38
> +#define MAX77620_REG_GPIO3 0x39
> +#define MAX77620_REG_GPIO4 0x3A
> +#define MAX77620_REG_GPIO5 0x3B
> +#define MAX77620_REG_GPIO6 0x3C
> +#define MAX77620_REG_GPIO7 0x3D
> +#define MAX77620_REG_PUE_GPIO 0x3E
> +#define MAX77620_REG_PDE_GPIO 0x3F
> +#define MAX77620_REG_AME_GPIO 0x40
> +#define MAX77620_REG_ONOFFCNFG1 0x41
> +#define MAX77620_REG_ONOFFCNFG2 0x42
> +
> +/* FPS Registers */
> +#define MAX77620_REG_FPS_CFG0 0x43
> +#define MAX77620_REG_FPS_CFG1 0x44
> +#define MAX77620_REG_FPS_CFG2 0x45
> +#define MAX77620_REG_FPS_LDO0 0x46
> +#define MAX77620_REG_FPS_LDO1 0x47
> +#define MAX77620_REG_FPS_LDO2 0x48
> +#define MAX77620_REG_FPS_LDO3 0x49
> +#define MAX77620_REG_FPS_LDO4 0x4A
> +#define MAX77620_REG_FPS_LDO5 0x4B
> +#define MAX77620_REG_FPS_LDO6 0x4C
> +#define MAX77620_REG_FPS_LDO7 0x4D
> +#define MAX77620_REG_FPS_LDO8 0x4E
> +#define MAX77620_REG_FPS_SD0 0x4F
> +#define MAX77620_REG_FPS_SD1 0x50
> +#define MAX77620_REG_FPS_SD2 0x51
> +#define MAX77620_REG_FPS_SD3 0x52
> +#define MAX77620_REG_FPS_SD4 0x53
> +#define MAX77620_REG_FPS_NONE 0
> +
> +#define MAX77620_FPS_SRC_MASK 0xC0
> +#define MAX77620_FPS_SRC_SHIFT 6
> +#define MAX77620_FPS_PU_PERIOD_MASK 0x38
> +#define MAX77620_FPS_PU_PERIOD_SHIFT 3
> +#define MAX77620_FPS_PD_PERIOD_MASK 0x07
> +#define MAX77620_FPS_PD_PERIOD_SHIFT 0
> +#define MAX77620_FPS_TIME_PERIOD_MASK 0x38
> +#define MAX77620_FPS_TIME_PERIOD_SHIFT 3
> +#define MAX77620_FPS_EN_SRC_MASK 0x06
> +#define MAX77620_FPS_EN_SRC_SHIFT 1
> +#define MAX77620_FPS_ENFPS_SW_MASK 0x01
> +#define MAX77620_FPS_ENFPS_SW 0x01
> +
> +#define MAX77620_REG_FPS_GPIO1 0x54
> +#define MAX77620_REG_FPS_GPIO2 0x55
> +#define MAX77620_REG_FPS_GPIO3 0x56
> +#define MAX77620_REG_FPS_RSO 0x57
> +#define MAX77620_REG_CID0 0x58
> +#define MAX77620_REG_CID1 0x59
> +#define MAX77620_REG_CID2 0x5A
> +#define MAX77620_REG_CID3 0x5B
> +#define MAX77620_REG_CID4 0x5C
> +#define MAX77620_REG_CID5 0x5D
> +
> +#define MAX77620_REG_DVSSD4 0x5E
> +#define MAX20024_REG_MAX_ADD 0x70
> +
> +#define MAX77620_CID_DIDM_MASK 0xF0
> +#define MAX77620_CID_DIDM_SHIFT 4
> +
> +/* CNCG2SD */
> +#define MAX77620_SD_CNF2_ROVS_EN_SD1 BIT(1)
> +#define MAX77620_SD_CNF2_ROVS_EN_SD0 BIT(2)
> +
> +/* Device Identification Metal */
> +#define MAX77620_CID5_DIDM(n) (((n) >> 4) & 0xF)
> +/* Device Indentification OTP */
> +#define MAX77620_CID5_DIDO(n) ((n) & 0xF)
> +
> +/* SD CNFG1 */
> +#define MAX77620_SD_SR_MASK 0xC0
> +#define MAX77620_SD_SR_SHIFT 6
> +#define MAX77620_SD_POWER_MODE_MASK 0x30
> +#define MAX77620_SD_POWER_MODE_SHIFT 4
> +#define MAX77620_SD_CFG1_ADE_MASK BIT(3)
> +#define MAX77620_SD_CFG1_ADE_DISABLE 0
> +#define MAX77620_SD_CFG1_ADE_ENABLE BIT(3)
> +#define MAX77620_SD_FPWM_MASK 0x04
> +#define MAX77620_SD_FPWM_SHIFT 2
> +#define MAX77620_SD_FSRADE_MASK 0x01
> +#define MAX77620_SD_FSRADE_SHIFT 0
> +#define MAX77620_SD_CFG1_FPWM_SD_MASK BIT(2)
> +#define MAX77620_SD_CFG1_FPWM_SD_SKIP 0
> +#define MAX77620_SD_CFG1_FPWM_SD_FPWM BIT(2)
> +#define MAX77620_SD_CFG1_FSRADE_SD_MASK BIT(0)
> +#define MAX77620_SD_CFG1_FSRADE_SD_DISABLE 0
> +#define MAX77620_SD_CFG1_FSRADE_SD_ENABLE BIT(0)
> +
> +/* LDO_CNFG2 */
> +#define MAX77620_LDO_POWER_MODE_MASK 0xC0
> +#define MAX77620_LDO_POWER_MODE_SHIFT 6
> +#define MAX77620_LDO_CFG2_ADE_MASK BIT(1)
> +#define MAX77620_LDO_CFG2_ADE_DISABLE 0
> +#define MAX77620_LDO_CFG2_ADE_ENABLE BIT(1)
> +#define MAX77620_LDO_CFG2_SS_MASK BIT(0)
> +#define MAX77620_LDO_CFG2_SS_FAST BIT(0)
> +#define MAX77620_LDO_CFG2_SS_SLOW 0
> +
> +#define MAX77620_IRQ_TOP_GLBL_MASK BIT(7)
> +#define MAX77620_IRQ_TOP_SD_MASK BIT(6)
> +#define MAX77620_IRQ_TOP_LDO_MASK BIT(5)
> +#define MAX77620_IRQ_TOP_GPIO_MASK BIT(4)
> +#define MAX77620_IRQ_TOP_RTC_MASK BIT(3)
> +#define MAX77620_IRQ_TOP_32K_MASK BIT(2)
> +#define MAX77620_IRQ_TOP_ONOFF_MASK BIT(1)
> +
> +#define MAX77620_IRQ_LBM_MASK BIT(3)
> +#define MAX77620_IRQ_TJALRM1_MASK BIT(2)
> +#define MAX77620_IRQ_TJALRM2_MASK BIT(1)
> +
> +#define MAX77620_PWR_I2C_ADDR 0x3c
> +#define MAX77620_RTC_I2C_ADDR 0x68
> +
> +#define MAX77620_CNFG_GPIO_DRV_MASK BIT(0)
> +#define MAX77620_CNFG_GPIO_DRV_PUSHPULL BIT(0)
> +#define MAX77620_CNFG_GPIO_DRV_OPENDRAIN 0
> +#define MAX77620_CNFG_GPIO_DIR_MASK BIT(1)
> +#define MAX77620_CNFG_GPIO_DIR_INPUT BIT(1)
> +#define MAX77620_CNFG_GPIO_DIR_OUTPUT 0
> +#define MAX77620_CNFG_GPIO_INPUT_VAL_MASK BIT(2)
> +#define MAX77620_CNFG_GPIO_OUTPUT_VAL_MASK BIT(3)
> +#define MAX77620_CNFG_GPIO_OUTPUT_VAL_HIGH BIT(3)
> +#define MAX77620_CNFG_GPIO_OUTPUT_VAL_LOW 0
> +#define MAX77620_CNFG_GPIO_INT_MASK (0x3 << 4)
> +#define MAX77620_CNFG_GPIO_INT_FALLING BIT(4)
> +#define MAX77620_CNFG_GPIO_INT_RISING BIT(5)
> +#define MAX77620_CNFG_GPIO_DBNC_MASK (0x3 << 6)
> +#define MAX77620_CNFG_GPIO_DBNC_None (0x0 << 6)
> +#define MAX77620_CNFG_GPIO_DBNC_8ms (0x1 << 6)
> +#define MAX77620_CNFG_GPIO_DBNC_16ms (0x2 << 6)
> +#define MAX77620_CNFG_GPIO_DBNC_32ms (0x3 << 6)
> +
> +#define MAX77620_IRQ_LVL2_GPIO_EDGE0 BIT(0)
> +#define MAX77620_IRQ_LVL2_GPIO_EDGE1 BIT(1)
> +#define MAX77620_IRQ_LVL2_GPIO_EDGE2 BIT(2)
> +#define MAX77620_IRQ_LVL2_GPIO_EDGE3 BIT(3)
> +#define MAX77620_IRQ_LVL2_GPIO_EDGE4 BIT(4)
> +#define MAX77620_IRQ_LVL2_GPIO_EDGE5 BIT(5)
> +#define MAX77620_IRQ_LVL2_GPIO_EDGE6 BIT(6)
> +#define MAX77620_IRQ_LVL2_GPIO_EDGE7 BIT(7)
> +
> +#define MAX77620_CNFG1_32K_OUT0_EN BIT(2)
> +
> +#define MAX77620_ONOFFCNFG1_SFT_RST BIT(7)
> +#define MAX77620_ONOFFCNFG1_MRT_MASK 0x38
> +#define MAX77620_ONOFFCNFG1_MRT_SHIFT 0x3
> +#define MAX77620_ONOFFCNFG1_SLPEN BIT(2)
> +#define MAX77620_ONOFFCNFG1_PWR_OFF BIT(1)
> +#define MAX20024_ONOFFCNFG1_CLRSE 0x18
> +
> +#define MAX77620_ONOFFCNFG2_SFT_RST_WK BIT(7)
> +#define MAX77620_ONOFFCNFG2_WD_RST_WK BIT(6)
> +#define MAX77620_ONOFFCNFG2_SLP_LPM_MSK BIT(5)
> +#define MAX77620_ONOFFCNFG2_WK_ALARM1 BIT(2)
> +#define MAX77620_ONOFFCNFG2_WK_EN0 BIT(0)
> +
> +#define MAX77620_GLBLM_MASK BIT(0)
> +
> +#define MAX77620_WDTC_MASK 0x3
> +#define MAX77620_WDTOFFC BIT(4)
> +#define MAX77620_WDTSLPC BIT(3)
> +#define MAX77620_WDTEN BIT(2)
> +
> +#define MAX77620_TWD_MASK 0x3
> +#define MAX77620_TWD_2s 0x0
> +#define MAX77620_TWD_16s 0x1
> +#define MAX77620_TWD_64s 0x2
> +#define MAX77620_TWD_128s 0x3
> +
> +#define MAX77620_CNFGGLBL1_LBDAC_EN BIT(7)
> +#define MAX77620_CNFGGLBL1_MPPLD BIT(6)
> +#define MAX77620_CNFGGLBL1_LBHYST (BIT(5) | BIT(4))
> +#define MAX77620_CNFGGLBL1_LBDAC 0x0E
> +#define MAX77620_CNFGGLBL1_LBRSTEN BIT(0)
> +
> +/* CNFG BBC registers */
> +#define MAX77620_CNFGBBC_ENABLE BIT(0)
> +#define MAX77620_CNFGBBC_CURRENT_MASK 0x06
> +#define MAX77620_CNFGBBC_CURRENT_SHIFT 1
> +#define MAX77620_CNFGBBC_VOLTAGE_MASK 0x18
> +#define MAX77620_CNFGBBC_VOLTAGE_SHIFT 3
> +#define MAX77620_CNFGBBC_LOW_CURRENT_DISABLE BIT(5)
> +#define MAX77620_CNFGBBC_RESISTOR_MASK 0xC0
> +#define MAX77620_CNFGBBC_RESISTOR_SHIFT 6
> +
> +#define MAX77620_FPS_COUNT 3
> +
> +/* Interrupts */
> +enum {
> + MAX77620_IRQ_TOP_GLBL, /* Low-Battery */
> + MAX77620_IRQ_TOP_SD, /* SD power fail */
> + MAX77620_IRQ_TOP_LDO, /* LDO power fail */
> + MAX77620_IRQ_TOP_GPIO, /* TOP GPIO internal int to MAX77620 */
> + MAX77620_IRQ_TOP_RTC, /* RTC */
> + MAX77620_IRQ_TOP_32K, /* 32kHz oscillator */
> + MAX77620_IRQ_TOP_ONOFF, /* ON/OFF oscillator */
> + MAX77620_IRQ_LBT_MBATLOW, /* Thermal alarm status, > 120C */
> + MAX77620_IRQ_LBT_TJALRM1, /* Thermal alarm status, > 120C */
> + MAX77620_IRQ_LBT_TJALRM2, /* Thermal alarm status, > 140C */
> +};
> +
> +/* GPIOs */
> +enum {
> + MAX77620_GPIO0,
> + MAX77620_GPIO1,
> + MAX77620_GPIO2,
> + MAX77620_GPIO3,
> + MAX77620_GPIO4,
> + MAX77620_GPIO5,
> + MAX77620_GPIO6,
> + MAX77620_GPIO7,
> + MAX77620_GPIO_NR,
> +};
> +
> +/* FPS Source */
> +enum max77620_fps_src {
> + MAX77620_FPS_SRC_0,
> + MAX77620_FPS_SRC_1,
> + MAX77620_FPS_SRC_2,
> + MAX77620_FPS_SRC_NONE,
> + MAX77620_FPS_SRC_DEF,
> +};
> +
> +enum max77620_chip_id {
> + MAX77620,
> + MAX20024,
> +};
> +
> +struct max77620_chip {
> + struct device *dev;
> + struct regmap *rmap;
> +
> + int chip_irq;
> + int irq_base;
> +
> + /* chip id */
> + enum max77620_chip_id chip_id;
> +
> + bool sleep_enable;
> + bool enable_global_lpm;
> + int shutdown_fps_period[MAX77620_FPS_COUNT];
> + int suspend_fps_period[MAX77620_FPS_COUNT];
> +
> + struct regmap_irq_chip_data *top_irq_data;
> + struct regmap_irq_chip_data *gpio_irq_data;
> +};
> +
> +#endif /* _LINUX_MFD_MAX77620_H_ */

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
\
 
 \ /
  Last update: 2016-04-27 17:41    [W:0.181 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site