Messages in this thread Patch in this message | | | From | Krzysztof Kozlowski <> | Subject | [PATCH v2 3/3] ARM: dts: exynos: Lower SD card interface voltage to 2.8v on Odroid X/X2/U3 | Date | Wed, 27 Apr 2016 16:00:20 +0200 |
| |
Odroid X/X2/U3 schematics say that SD card vmmc regulator (LDO21/TFLASH) operates on 2.8 V. Mainline U-Boot uses that value as well. 2.8 V is common on Exynos-based boards. Additionally use some descriptive name for this regulator.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
Changes since v1: 1. None --- arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 34a5b3daced0..260601d2f72f 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -341,9 +341,9 @@ }; ldo21_reg: LDO21 { - regulator-name = "LDO21_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + regulator-name = "TFLASH_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; regulator-boot-on; }; -- 1.9.1
| |