lkml.org 
[lkml]   [2016]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 8/9] arm64: tegra: set hot trips for Tegra132
Date
Enable throttle function for SOC_THERM.
Set "hot" trips for cpu and gpu thermal zones, which
can trigger the SOC_THERM hardware throttle.

Signed-off-by: Wei Ni <wni@nvidia.com>
---
arch/arm64/boot/dts/nvidia/tegra132.dtsi | 41 +++++++++++++++++++++++++-------
1 file changed, 32 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
index a3889e930010..fa671c1da279 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
@@ -729,7 +729,9 @@

soctherm: thermal-sensor@700e2000 {
compatible = "nvidia,tegra132-soctherm";
- reg = <0x0 0x700e2000 0x0 0x600>;
+ reg = <0x0 0x700e2000 0x0 0x600 /* 0: SOC_THERM reg_base */
+ 0x0 0x70040000 0x0 0x200>; /* 2: CCROC reg_base */
+ reg-names = "soctherm-reg", "ccroc-reg";
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
<&tegra_car TEGRA124_CLK_SOC_THERM>;
@@ -737,6 +739,15 @@
resets = <&tegra_car 78>;
reset-names = "soctherm";
#thermal-sensor-cells = <1>;
+
+ throttle-cfgs {
+ throttle_heavy: heavy {
+ priority = <100>;
+ cpu-throt-depth = <85>;
+
+ #cooling-cells = <1>;
+ };
+ };
};

thermal-zones {
@@ -753,13 +764,19 @@
hysteresis = <1000>;
type = "critical";
};
+
+ cpu_throttle_trip: throttle-trip {
+ temperature = <102000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
};

cooling-maps {
- /*
- * There are currently no cooling maps,
- * because there are no cooling devices.
- */
+ map0 {
+ trip = <&cpu_throttle_trip>;
+ cooling-device = <&throttle_heavy 1 1>;
+ };
};
};
mem {
@@ -797,13 +814,19 @@
hysteresis = <1000>;
type = "critical";
};
+
+ gpu_throttle_trip: throttle-trip {
+ temperature = <99000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
};

cooling-maps {
- /*
- * There are currently no cooling maps,
- * because there are no cooling devices.
- */
+ map0 {
+ trip = <&gpu_throttle_trip>;
+ cooling-device = <&throttle_heavy 1 1>;
+ };
};
};
pllx {
--
1.9.1
\
 
 \ /
  Last update: 2016-04-27 05:41    [W:0.076 / U:0.884 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site