lkml.org 
[lkml]   [2016]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[Patch v2 5/8] firmware: qcom: scm: Add support for ARM64 SoCs
Date
From: Kumar Gala <galak@codeaurora.org>

Add an implementation of the SCM interface that works on ARM64 SoCs. This
is used by things like determine if we have HDCP support or not on the
system.

Signed-off-by: Kumar Gala <galak@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
---
drivers/firmware/qcom_scm-32.c | 4 +
drivers/firmware/qcom_scm-64.c | 187 +++++++++++++++++++++++++++++++++++++++--
drivers/firmware/qcom_scm.c | 2 +
drivers/firmware/qcom_scm.h | 5 ++
4 files changed, 191 insertions(+), 7 deletions(-)

diff --git a/drivers/firmware/qcom_scm-32.c b/drivers/firmware/qcom_scm-32.c
index 9e3dc2f..0d2a3f8 100644
--- a/drivers/firmware/qcom_scm-32.c
+++ b/drivers/firmware/qcom_scm-32.c
@@ -482,3 +482,7 @@ int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
return qcom_scm_call(QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP,
req, req_cnt * sizeof(*req), resp, sizeof(*resp));
}
+
+void __qcom_scm_init(void)
+{
+}
diff --git a/drivers/firmware/qcom_scm-64.c b/drivers/firmware/qcom_scm-64.c
index bb6555f..90e6f19 100644
--- a/drivers/firmware/qcom_scm-64.c
+++ b/drivers/firmware/qcom_scm-64.c
@@ -12,12 +12,135 @@

#include <linux/io.h>
#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/types.h>
#include <linux/qcom_scm.h>
+#include <linux/arm-smccc.h>
+
+#include "qcom_scm.h"
+
+#define QCOM_SCM_FNID(s, c) ((((s) & 0xFF) << 8) | ((c) & 0xFF))
+
+#define MAX_QCOM_SCM_ARGS 10
+#define MAX_QCOM_SCM_RETS 3
+
+#define QCOM_SCM_ARGS_IMPL(num, a, b, c, d, e, f, g, h, i, j, ...) (\
+ (((a) & 0xff) << 4) | \
+ (((b) & 0xff) << 6) | \
+ (((c) & 0xff) << 8) | \
+ (((d) & 0xff) << 10) | \
+ (((e) & 0xff) << 12) | \
+ (((f) & 0xff) << 14) | \
+ (((g) & 0xff) << 16) | \
+ (((h) & 0xff) << 18) | \
+ (((i) & 0xff) << 20) | \
+ (((j) & 0xff) << 22) | \
+ (num & 0xffff))
+
+#define QCOM_SCM_ARGS(...) QCOM_SCM_ARGS_IMPL(__VA_ARGS__, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0)
+
+/**
+ * struct qcom_scm_desc
+ * @arginfo: Metadata describing the arguments in args[]
+ * @args: The array of arguments for the secure syscall
+ * @res: The values returned by the secure syscall
+ */
+struct qcom_scm_desc {
+ u32 arginfo;
+ u64 args[MAX_QCOM_SCM_ARGS];
+ struct arm_smccc_res res;
+};
+
+static u64 qcom_smccc_convention = -1;
+static DEFINE_MUTEX(qcom_scm_lock);
+
+#define QCOM_SCM_EBUSY_WAIT_MS 30
+#define QCOM_SCM_EBUSY_MAX_RETRY 20
+
+#define N_EXT_QCOM_SCM_ARGS 7
+#define FIRST_EXT_ARG_IDX 3
+#define N_REGISTER_ARGS (MAX_QCOM_SCM_ARGS - N_EXT_QCOM_SCM_ARGS + 1)
+
+/**
+ * qcom_scm_call() - Invoke a syscall in the secure world
+ * @svc_id: service identifier
+ * @cmd_id: command identifier
+ * @fn_id: The function ID for this syscall
+ * @desc: Descriptor structure containing arguments and return values
+ *
+ * Sends a command to the SCM and waits for the command to finish processing.
+ * This should *only* be called in pre-emptible context.
+*/
+static int qcom_scm_call(u32 svc_id, u32 cmd_id, struct qcom_scm_desc *desc)
+{
+ int arglen = desc->arginfo & 0xf;
+ int ret, retry_count = 0, i;
+ u32 fn_id = QCOM_SCM_FNID(svc_id, cmd_id);
+ u64 cmd, x5 = desc->args[FIRST_EXT_ARG_IDX];
+ dma_addr_t args_phys;
+ void *args_virt = NULL;
+ size_t alloc_size;
+
+ if (unlikely(arglen > N_REGISTER_ARGS)) {
+ alloc_size = N_EXT_QCOM_SCM_ARGS * sizeof(u64);
+ args_virt = qcom_scm_alloc_buffer(alloc_size, &args_phys,
+ GFP_KERNEL);
+ if (!args_virt)
+ return qcom_scm_remap_error(-ENOMEM);
+
+ if (qcom_smccc_convention == ARM_SMCCC_SMC_32) {
+ __le32 *args = args_virt;
+
+ for (i = 0; i < N_EXT_QCOM_SCM_ARGS; i++)
+ args[i] = cpu_to_le32(desc->args[i +
+ FIRST_EXT_ARG_IDX]);
+ } else {
+ __le64 *args = args_virt;
+
+ for (i = 0; i < N_EXT_QCOM_SCM_ARGS; i++)
+ args[i] = cpu_to_le64(desc->args[i +
+ FIRST_EXT_ARG_IDX]);
+ }
+
+ x5 = args_phys;
+ }
+
+ do {
+ mutex_lock(&qcom_scm_lock);
+
+ cmd = ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL,
+ qcom_smccc_convention,
+ ARM_SMCCC_OWNER_SIP, fn_id);
+
+ do {
+ arm_smccc_smc(cmd, arglen, desc->args[0], desc->args[1],
+ desc->args[2], x5, 0, 0, &desc->res);
+ } while (desc->res.a0 == QCOM_SCM_INTERRUPTED);
+
+ mutex_unlock(&qcom_scm_lock);
+
+ if (desc->res.a0 == QCOM_SCM_V2_EBUSY) {
+ if (retry_count++ > QCOM_SCM_EBUSY_MAX_RETRY)
+ break;
+ msleep(QCOM_SCM_EBUSY_WAIT_MS);
+ }
+ } while (desc->res.a0 == QCOM_SCM_V2_EBUSY);
+
+ if (args_virt)
+ qcom_scm_free_buffer(alloc_size, args_virt, args_phys);
+
+ if (desc->res.a0 < 0)
+ return qcom_scm_remap_error(ret);
+
+ return 0;
+}

/**
* qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
- * @entry: Entry point function for the cpus
- * @cpus: The cpumask of cpus that will use the entry point
+ * @entry: Entry point function for the cpus
+ * @cpus: The cpumask of cpus that will use the entry point
*
* Set the cold boot address of the cpus. Any cpu outside the supported
* range would be removed from the cpu present mask.
@@ -29,8 +152,8 @@ int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)

/**
* qcom_scm_set_warm_boot_addr() - Set the warm boot address for cpus
- * @entry: Entry point function for the cpus
- * @cpus: The cpumask of cpus that will use the entry point
+ * @entry: Entry point function for the cpus
+ * @cpus: The cpumask of cpus that will use the entry point
*
* Set the Linux entry point for the SCM to transfer control to when coming
* out of a power down. CPU power down may be executed on cpuidle or hotplug.
@@ -42,7 +165,7 @@ int __qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)

/**
* qcom_scm_cpu_power_down() - Power down the cpu
- * @flags - Flags to flush cache
+ * @flags: Flags to flush cache
*
* This is an end point to power down cpu. If there was a pending interrupt,
* the control would return from this function, otherwise, the cpu jumps to the
@@ -54,10 +177,60 @@ void __qcom_scm_cpu_power_down(u32 flags)

int __qcom_scm_is_call_available(u32 svc_id, u32 cmd_id)
{
- return -ENOTSUPP;
+ int ret;
+ struct qcom_scm_desc desc = {0};
+
+ desc.arginfo = QCOM_SCM_ARGS(1);
+ desc.args[0] = QCOM_SCM_FNID(svc_id, cmd_id) |
+ (ARM_SMCCC_OWNER_SIP << ARM_SMCCC_OWNER_SHIFT);
+
+ ret = qcom_scm_call(QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD,
+ &desc);
+
+ return ret ? : desc.res.a1;
}

int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
{
- return -ENOTSUPP;
+ int ret;
+ struct qcom_scm_desc desc = {0};
+
+ if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT)
+ return -ERANGE;
+
+ desc.args[0] = req[0].addr;
+ desc.args[1] = req[0].val;
+ desc.args[2] = req[1].addr;
+ desc.args[3] = req[1].val;
+ desc.args[4] = req[2].addr;
+ desc.args[5] = req[2].val;
+ desc.args[6] = req[3].addr;
+ desc.args[7] = req[3].val;
+ desc.args[8] = req[4].addr;
+ desc.args[9] = req[4].val;
+ desc.arginfo = QCOM_SCM_ARGS(10);
+
+ ret = qcom_scm_call(QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP, &desc);
+ *resp = desc.res.a1;
+
+ return ret;
+}
+
+void __qcom_scm_init(void)
+{
+ u64 cmd;
+ struct arm_smccc_res res;
+ u32 function = QCOM_SCM_FNID(QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD);
+
+ /* First try a SMC64 call */
+ cmd = ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_64,
+ ARM_SMCCC_OWNER_SIP, function);
+
+ arm_smccc_smc(cmd, QCOM_SCM_ARGS(1), cmd & (~BIT(ARM_SMCCC_TYPE_SHIFT)),
+ 0, 0, 0, 0, 0, &res);
+
+ if (!res.a0 && res.a1)
+ qcom_smccc_convention = ARM_SMCCC_SMC_64;
+ else
+ qcom_smccc_convention = ARM_SMCCC_SMC_32;
}
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index 8f78938..03c9d05 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -216,6 +216,8 @@ static int qcom_scm_probe(struct platform_device *pdev)
__scm = scm;
__scm->dev = &pdev->dev;

+ __qcom_scm_init();
+
return 0;
}

diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h
index 848c7de..58fd454 100644
--- a/drivers/firmware/qcom_scm.h
+++ b/drivers/firmware/qcom_scm.h
@@ -40,7 +40,10 @@ extern void *qcom_scm_alloc_buffer(size_t size, dma_addr_t *dma_addr,
gfp_t gfp);
extern void qcom_scm_free_buffer(size_t size, void *virt_addr,
dma_addr_t dma_addr);
+extern void __qcom_scm_init(void);
+
/* common error codes */
+#define QCOM_SCM_V2_EBUSY -12
#define QCOM_SCM_ENOMEM -5
#define QCOM_SCM_EOPNOTSUPP -4
#define QCOM_SCM_EINVAL_ADDR -3
@@ -60,6 +63,8 @@ static inline int qcom_scm_remap_error(int err)
return -EOPNOTSUPP;
case QCOM_SCM_ENOMEM:
return -ENOMEM;
+ case QCOM_SCM_V2_EBUSY:
+ return -EBUSY;
}
return -EINVAL;
}
--
1.9.1
\
 
 \ /
  Last update: 2016-04-26 01:21    [W:0.085 / U:0.616 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site