lkml.org 
[lkml]   [2016]   [Apr]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRE: [PATCH v6 07/12] usb: otg: add OTG/dual-role core
Date
Hi,

> From: Peter Chen
> Sent: Friday, April 22, 2016 12:34 PM
>
> On Fri, Apr 22, 2016 at 09:26:46AM +0800, Peter Chen wrote:
> > On Fri, Apr 15, 2016 at 10:03:16AM +0000, Yoshihiro Shimoda wrote:
> > > Hi,
> > >
> > > > From: Yoshihiro Shimoda
> > > > Sent: Friday, April 15, 2016 6:59 PM
> > > >
> > > > Hi,
> > > >
> > > > > From: Roger Quadros
> > > > > Sent: Thursday, April 14, 2016 8:32 PM
> > > > >
> > > > > On 14/04/16 14:15, Yoshihiro Shimoda wrote:
> > > > > > Hi,
> > > > > >
> > > > < snip >
> > > > > >>> @@ -865,7 +867,8 @@ int usb_otg_register_hcd(struct usb_hcd *hcd, unsigned int irqnum,
> > > > > >>> * we're ready only if we have shared HCD
> > > > > >>> * or we don't need shared HCD.
> > > > > >>> */
> > > > > >>> - if (otg->shared_hcd.hcd || !otg->primary_hcd.hcd->shared_hcd) {
> > > > > >>> + if (otg->shared_hcd.hcd || (!otg->caps->needs_companion &&
> > > > > >>> + !otg->primary_hcd.hcd->shared_hcd)) {
> > > > > >>> otg->host = hcd_to_bus(hcd);
> > > > > >>> /* FIXME: set bus->otg_port if this is true OTG port with HNP */
> > > > > >>>
> > > > > >>
> > > > > >> These changes look good to me. Thanks.
> > > > > >
> > > > > > Thank you for the comment.
> > > > > > If we change the "needs_companion" place to the otg_config,
> > > > > > do we need to add a flag into the otg, instead of otg->caps?
> > > > >
> > > > > Yes we can add a flag in struct usb_otg.
> > > >
> > > > Thank you for the comment.
> > > >
> > > > I made a fixed patch.
> > > > So, should I send this patch to ML after you sent v7 patches?
> > > > Or, would you apply this patch before you send v7 patches?
> > >
> > > Oops, I sent this email without my patch...
> > >
> > > ---
> > > Subject: [PATCH] usb: otg: add hcd companion support
> > >
> > > Since some host controller (e.g. EHCI) needs a companion host controller
> > > (e.g. OHCI), this patch adds such a configuration to use it in the OTG
> > > core.
> > >
> > > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> > > ---
> > > Documentation/devicetree/bindings/usb/generic.txt | 3 +++
> > > drivers/usb/common/usb-otg.c | 17 +++++++++++++----
> > > include/linux/usb/otg.h | 7 ++++++-
> > > 3 files changed, 22 insertions(+), 5 deletions(-)
> > >
> > > diff --git a/Documentation/devicetree/bindings/usb/generic.txt b/Documentation/devicetree/bindings/usb/generic.txt
> > > index f6866c1..1db1c33 100644
> > > --- a/Documentation/devicetree/bindings/usb/generic.txt
> > > +++ b/Documentation/devicetree/bindings/usb/generic.txt
> > > @@ -27,6 +27,9 @@ Optional properties:
> > > - otg-controller: phandle to otg controller. Host or gadget controllers can
> > > contain this property to link it to a particular OTG
> > > controller.
> > > + - hcd-needs-companion: must be present if otg controller is dealing with
> > > + EHCI host controller that needs a companion OHCI host
> > > + controller.
> > >
> > > This is an attribute to a USB controller such as:
> > >
> > > diff --git a/drivers/usb/common/usb-otg.c b/drivers/usb/common/usb-otg.c
> > > index 41e762a..83c8c96 100644
> > > --- a/drivers/usb/common/usb-otg.c
> > > +++ b/drivers/usb/common/usb-otg.c
> > > @@ -20,6 +20,7 @@
> > > #include <linux/list.h>
> > > #include <linux/of.h>
> > > #include <linux/of_platform.h>
> > > +#include <linux/usb/of.h>
> > > #include <linux/usb/otg.h>
> > > #include <linux/usb/gadget.h>
> > > #include <linux/workqueue.h>
> > > @@ -600,6 +601,10 @@ struct usb_otg *usb_otg_register(struct device *dev,
> > > else
> > > INIT_WORK(&otg->work, usb_otg_work);
> > >
> > > + if (of_find_property(dev->of_node, "hcd-needs-companion", NULL) ||
> > > + config->hcd_needs_companion) /* needs comanion ? */
> > > + otg->flags |= OTG_FLAG_HCD_NEEDS_COMPANION;
> > > +
> > > otg->wq = create_singlethread_workqueue("usb_otg");
> > > if (!otg->wq) {
> > > dev_err(dev, "otg: %s: can't create workqueue\n",
> > > @@ -823,13 +828,15 @@ int usb_otg_register_hcd(struct usb_hcd *hcd, unsigned int irqnum,
> > > /* HCD will be started by OTG fsm when needed */
> > > mutex_lock(&otg->fsm.lock);
> > > if (otg->primary_hcd.hcd) {
> > > - /* probably a shared HCD ? */
> > > - if (usb_otg_hcd_is_primary_hcd(hcd)) {
> > > + /* probably a shared HCD or a companion OHCI HCD ? */
> > > + if (!(otg->flags & OTG_FLAG_HCD_NEEDS_COMPANION) &&
> > > + usb_otg_hcd_is_primary_hcd(hcd)) {
> > > dev_err(otg_dev, "otg: primary host already registered\n");
> > > goto err;
> > > }
> > >
> > > - if (hcd->shared_hcd == otg->primary_hcd.hcd) {
> > > + if (otg->flags & OTG_FLAG_HCD_NEEDS_COMPANION ||
> > > + (hcd->shared_hcd == otg->primary_hcd.hcd)) {
> > > if (otg->shared_hcd.hcd) {
> > > dev_err(otg_dev, "otg: shared host already registered\n");
> > > goto err;
> > > @@ -865,7 +872,9 @@ int usb_otg_register_hcd(struct usb_hcd *hcd, unsigned int irqnum,
> > > * we're ready only if we have shared HCD
> > > * or we don't need shared HCD.
> > > */
> > > - if (otg->shared_hcd.hcd || !otg->primary_hcd.hcd->shared_hcd) {
> > > + if (otg->shared_hcd.hcd ||
> > > + (!(otg->flags & OTG_FLAG_HCD_NEEDS_COMPANION) &&
> > > + !otg->primary_hcd.hcd->shared_hcd)) {
> > > otg->host = hcd_to_bus(hcd);
> > > /* FIXME: set bus->otg_port if this is true OTG port with HNP */
> > >
> > > diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
> > > index b094352..6f4ca77 100644
> > > --- a/include/linux/usb/otg.h
> > > +++ b/include/linux/usb/otg.h
> > > @@ -57,7 +57,8 @@ struct otg_hcd {
> > > * @list: list of otg controllers
> > > * @work: otg state machine work
> > > * @wq: otg state machine work queue
> > > - * @flags: to track if host/gadget is running
> > > + * @flags: to track if host/gadget is running, or to indicate if hcd needs
> > > + * companion
> > > */
> > > struct usb_otg {
> > > u8 default_a;
> > > @@ -84,6 +85,7 @@ struct usb_otg {
> > > u32 flags;
> > > #define OTG_FLAG_GADGET_RUNNING (1 << 0)
> > > #define OTG_FLAG_HOST_RUNNING (1 << 1)
> > > +#define OTG_FLAG_HCD_NEEDS_COMPANION (1 << 2)
> > > /* use otg->fsm.lock for serializing access */
> > >
> > > /*------------- deprecated interface -----------------------------*/
> > > @@ -125,11 +127,14 @@ struct usb_otg_caps {
> > > * @caps: otg capabilities of the controller
> > > * @ops: otg fsm operations
> > > * @otg_work: optional custom otg state machine work function
> > > + * @hcd_needs_companion: Indicates if host controller needs a companion
> > > + * controller
> > > */
> > > struct usb_otg_config {
> > > struct usb_otg_caps *otg_caps;
> > > struct otg_fsm_ops *fsm_ops;
> > > void (*otg_work)(struct work_struct *work);
> > > + bool hcd_needs_companion;
> > > };
> > >
> > > extern const char *usb_otg_state_string(enum usb_otg_state state);
> > > --
> >
> > Hi Yoshihiro, the shared_hcd is used for USB3 only [1], this patch may
> > not be suitable for supporting companion controller at OTG framework.
> > For companion or other USB2 controllers, both primary hcd and shard hcd
> > are NULL for HCD core.
> >
>
> Oh, I may be wrong. It should be ok for companion controller by using
> this patch. Yoshihiro, do all below variables are NULL after both hcds
> call usb_otg_register_hcd?
>
> otg->primary_hcd.hcd->shared_hcd
> otg->primary_hcd.hcd->primary_hcd
> otg->shared_hcd.hcd->shared_hcd
> otg->shared_hcd.hcd->primary_hcd

Thank you for the review twice! :)
I checked these variables and the variables was set to NULL after both
hcds call usb_otg_register_hcd.

< a patch for the check >
diff --git a/drivers/usb/common/usb-otg.c b/drivers/usb/common/usb-otg.c
index 83c8c96..1fb7ea0 100644
--- a/drivers/usb/common/usb-otg.c
+++ b/drivers/usb/common/usb-otg.c
@@ -884,6 +884,19 @@ int usb_otg_register_hcd(struct usb_hcd *hcd, unsigned int irqnum,
dev_dbg(otg_dev, "otg: can't start till shared host registers\n");
}

+ if (otg->primary_hcd.hcd) {
+ dev_info(otg_dev, "primary_hcd.hcd->shared_hcd = %p\n",
+ otg->primary_hcd.hcd->shared_hcd);
+ dev_info(otg_dev, "primary_hcd.hcd->primary_hcd = %p\n",
+ otg->primary_hcd.hcd->primary_hcd);
+ }
+ if (otg->shared_hcd.hcd) {
+ dev_info(otg_dev, "shared_hcd.hcd->shared_hcd = %p\n",
+ otg->shared_hcd.hcd->shared_hcd);
+ dev_info(otg_dev, "shared_hcd.hcd->primary_hcd = %p\n",
+ otg->shared_hcd.hcd->primary_hcd);
+ }
+
mutex_unlock(&otg->fsm.lock);

return 0;
< result >
[ 1.797122] phy_rcar_gen3_usb2 ee080200.usb-phy: otg: limiting to dual-role
[ 1.804228] phy_rcar_gen3_usb2 ee080200.usb-phy: otg: primary host ee080100.usb registered
[ 1.812168] phy_rcar_gen3_usb2 ee080200.usb-phy: primary_hcd.hcd->shared_hcd = (null)
[ 1.820520] phy_rcar_gen3_usb2 ee080200.usb-phy: primary_hcd.hcd->primary_hcd = (null)
[ 1.829136] phy_rcar_gen3_usb2 ee080200.usb-phy: otg: shared host ee080000.usb registered
[ 1.836993] phy_rcar_gen3_usb2 ee080200.usb-phy: otg: can't start till gadget registers
[ 1.844675] phy_rcar_gen3_usb2 ee080200.usb-phy: primary_hcd.hcd->shared_hcd = (null)
[ 1.853024] phy_rcar_gen3_usb2 ee080200.usb-phy: primary_hcd.hcd->primary_hcd = (null)
[ 1.861458] phy_rcar_gen3_usb2 ee080200.usb-phy: shared_hcd.hcd->shared_hcd = (null)
[ 1.869724] phy_rcar_gen3_usb2 ee080200.usb-phy: shared_hcd.hcd->primary_hcd = (null)
Best regards,
Yoshihiro Shimoda

> --
>
> Best Regards,
> Peter Chen

\
 
 \ /
  Last update: 2016-04-22 08:21    [W:0.091 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site