lkml.org 
[lkml]   [2016]   [Apr]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 2/2] i2c: s3c2410: Check clk_prepare_enable() return value
From
Date
On 04/20/2016 04:37 PM, Javier Martinez Canillas wrote:
> The clk_prepare_enable() function can fail so check the return
> value and propagate the error in case of a failure.
>
> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
>
> ---
>
> Changes in v2:
> - Don't print the errno code since that's already printed by the
> core when probe fails. Suggested by Krzysztof Kozlowski.
>
> drivers/i2c/busses/i2c-s3c2410.c | 7 ++++++-
> 1 file changed, 6 insertions(+), 1 deletion(-)


Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Tested on Trats2 (Exynos4412, samsung,s3c2440-i2c)
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Best regards,
Krzysztof


\
 
 \ /
  Last update: 2016-04-21 09:41    [W:0.179 / U:0.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site