lkml.org 
[lkml]   [2016]   [Apr]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: regression: 3a878c430fd6 ("tty: serial: msm: Add TX DMA support") drops data
On 4/19/2016 11:07 PM, Ivan Ivanov wrote:
>
>> On Apr 20, 2016, at 02:23, Frank Rowand <frowand.list@gmail.com> wrote:
>>
>> Hi Ivan,
>>
>> It appears that I have found a regression caused by
>> 3a878c430fd6 ("tty: serial: msm: Add TX DMA support").
>>
>> When I cat a file slightly larger than 126000 bytes on
>> the console, viewed via minicom connected to the serial
>> port, I am losing random chunks of data, almost always
>> three bytes in length. I have also seen a lost chunk
>> of two bytes.
>>
>> I am using the 8074 dragonboard, with the dts of
>> arch/arm/boot/dts/qcom-apq8074-dragonboard.dts.
>> The dts node is serial@f991e000, which has a
>> compatible of "qcom,msm-uartdm-v1.4", so is_uartdm
>> should be UARTDM_1P4.
>
> I don’t remember what was biggest chunk, which DMA
> could carry, sorry. Are you using DMA or just PIO?
> Is this happening only with cat and terminal or even
> when you send data in other means. I believe that
> people from Linaro could help you better.

I assumed you would be the person who would have the
information and would be able to help maintain the
code in question since you submitted this not small
patch. Do you have a pointer to the hardware
documentation of the DMA and uart? Who at Linaro
are you suggesting?

Thanks for the questions, I'll look into them today.

One more observation that may provide an insight:
if I cat a file multiple times, the location of
the dropped chunks varies.

In further testing I also found examples of single
bytes lost.

Thanks,

Frank

\
 
 \ /
  Last update: 2016-04-20 19:01    [W:0.060 / U:2.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site