lkml.org 
[lkml]   [2016]   [Apr]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v6 06/12] usb: otg: get rid of CONFIG_USB_OTG_FSM in favour of CONFIG_USB_OTG
From
Date
On 18/04/16 11:05, Peter Chen wrote:
> On Tue, Apr 05, 2016 at 05:05:11PM +0300, Roger Quadros wrote:
>> Let's use CONFIG_USB_OTG as a single config option to enable
>> USB OTG and the OTG FSM. This makes things a lot less confusing.
>>
>> Update all users of CONFIG_USB_OTG_FSM to CONFIG_USB_OTG.
>>
>> Signed-off-by: Roger Quadros <rogerq@ti.com>
>> ---
>> Documentation/usb/chipidea.txt | 2 +-
>> drivers/usb/Makefile | 1 +
>> drivers/usb/chipidea/Makefile | 2 +-
>> drivers/usb/chipidea/ci.h | 2 +-
>> drivers/usb/chipidea/otg_fsm.h | 2 +-
>> drivers/usb/common/Makefile | 3 ++-
>> drivers/usb/core/Kconfig | 8 --------
>> drivers/usb/phy/Kconfig | 2 +-
>> 8 files changed, 8 insertions(+), 14 deletions(-)
>>
>> diff --git a/Documentation/usb/chipidea.txt b/Documentation/usb/chipidea.txt
>> index 678741b..3b1f263 100644
>> --- a/Documentation/usb/chipidea.txt
>> +++ b/Documentation/usb/chipidea.txt
>> @@ -5,7 +5,7 @@ with 2 Freescale i.MX6Q sabre SD boards.
>>
>> 1.1 How to enable OTG FSM in menuconfig
>> ---------------------------------------
>> -Select CONFIG_USB_OTG_FSM, rebuild kernel Image and modules.
>> +Select CONFIG_USB_OTG, rebuild kernel Image and modules.
>> If you want to check some internal variables for otg fsm,
>> mount debugfs, there are 2 files which can show otg fsm
>> variables and some controller registers value:
>> diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
>> index dca7856..16a5b55 100644
>> --- a/drivers/usb/Makefile
>> +++ b/drivers/usb/Makefile
>> @@ -59,5 +59,6 @@ obj-$(CONFIG_USB_RENESAS_USBHS) += renesas_usbhs/
>> obj-$(CONFIG_USB_GADGET) += gadget/
>>
>> obj-$(CONFIG_USB_COMMON) += common/
>> +obj-$(CONFIG_USB_OTG) += common/
>
> Why we need to add above line?

It is not needed as USB_OTG can't be set without USB_COMMON.
I'll remove it.

cheers,
-roger

>
> Peter
>>
>> obj-$(CONFIG_USBIP_CORE) += usbip/
>> diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile
>> index 518e445..45aa24d 100644
>> --- a/drivers/usb/chipidea/Makefile
>> +++ b/drivers/usb/chipidea/Makefile
>> @@ -3,7 +3,7 @@ obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc.o
>> ci_hdrc-y := core.o otg.o debug.o
>> ci_hdrc-$(CONFIG_USB_CHIPIDEA_UDC) += udc.o
>> ci_hdrc-$(CONFIG_USB_CHIPIDEA_HOST) += host.o
>> -ci_hdrc-$(CONFIG_USB_OTG_FSM) += otg_fsm.o
>> +ci_hdrc-$(CONFIG_USB_OTG) += otg_fsm.o
>>
>> # Glue/Bridge layers go here
>>
>> diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
>> index c523975..1a32b8c 100644
>> --- a/drivers/usb/chipidea/ci.h
>> +++ b/drivers/usb/chipidea/ci.h
>> @@ -406,7 +406,7 @@ static inline u32 hw_test_and_write(struct ci_hdrc *ci, enum ci_hw_regs reg,
>> */
>> static inline bool ci_otg_is_fsm_mode(struct ci_hdrc *ci)
>> {
>> -#ifdef CONFIG_USB_OTG_FSM
>> +#ifdef CONFIG_USB_OTG
>> struct usb_otg_caps *otg_caps = &ci->platdata->ci_otg_caps;
>>
>> return ci->is_otg && ci->roles[CI_ROLE_HOST] &&
>> diff --git a/drivers/usb/chipidea/otg_fsm.h b/drivers/usb/chipidea/otg_fsm.h
>> index 6366fe3..2d451bb 100644
>> --- a/drivers/usb/chipidea/otg_fsm.h
>> +++ b/drivers/usb/chipidea/otg_fsm.h
>> @@ -64,7 +64,7 @@
>>
>> #define TB_AIDL_BDIS (20) /* 4ms ~ 150ms, section 5.2.1 */
>>
>> -#if IS_ENABLED(CONFIG_USB_OTG_FSM)
>> +#if IS_ENABLED(CONFIG_USB_OTG)
>>
>> int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci);
>> int ci_otg_fsm_work(struct ci_hdrc *ci);
>> diff --git a/drivers/usb/common/Makefile b/drivers/usb/common/Makefile
>> index 6bbb3ec..f8f2c88 100644
>> --- a/drivers/usb/common/Makefile
>> +++ b/drivers/usb/common/Makefile
>> @@ -6,5 +6,6 @@ obj-$(CONFIG_USB_COMMON) += usb-common.o
>> usb-common-y += common.o
>> usb-common-$(CONFIG_USB_LED_TRIG) += led.o
>>
>> -obj-$(CONFIG_USB_OTG_FSM) += usb-otg-fsm.o
>> obj-$(CONFIG_USB_ULPI_BUS) += ulpi.o
>> +usbotg-y := usb-otg-fsm.o
>> +obj-$(CONFIG_USB_OTG) += usbotg.o
>> diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
>> index dd28010..ae228d0 100644
>> --- a/drivers/usb/core/Kconfig
>> +++ b/drivers/usb/core/Kconfig
>> @@ -75,14 +75,6 @@ config USB_OTG_BLACKLIST_HUB
>> and software costs by not supporting external hubs. So
>> are "Embedded Hosts" that don't offer OTG support.
>>
>> -config USB_OTG_FSM
>> - tristate "USB 2.0 OTG FSM implementation"
>> - depends on USB && USB_OTG
>> - select USB_PHY
>> - help
>> - Implements OTG Finite State Machine as specified in On-The-Go
>> - and Embedded Host Supplement to the USB Revision 2.0 Specification.
>> -
>> config USB_ULPI_BUS
>> tristate "USB ULPI PHY interface support"
>> depends on USB_SUPPORT
>> diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
>> index c690474..06794e2 100644
>> --- a/drivers/usb/phy/Kconfig
>> +++ b/drivers/usb/phy/Kconfig
>> @@ -20,7 +20,7 @@ config AB8500_USB
>>
>> config FSL_USB2_OTG
>> bool "Freescale USB OTG Transceiver Driver"
>> - depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM && PM
>> + depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG && PM
>> select USB_PHY
>> help
>> Enable this to support Freescale USB OTG transceiver.
>> --
>> 2.5.0
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>

\
 
 \ /
  Last update: 2016-04-20 10:21    [W:0.365 / U:0.556 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site