lkml.org 
[lkml]   [2016]   [Apr]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/5] Support for max44000 Ambient and Infrared Proximity Sensor
Date
Changes since v2:
* Drop reg_defaults from regmap_config
* Use REGCACHE_RBTREE
* Implement readable/writable/volatile reg with switches
* Use test_bit when checking the scan mask
* Add _INT_TIME info_mask in patch 4 rather than 2
* Cleaner spacing in max44000_remove

Changes since v1:
* Remove max44000_data.client
* Maintain alphabetical order in kconfig/makefile
* Avoid pointless inlines
* Remove explicit CONFIG_OF because no special handling is done
* Set storagebits = 16 for proximity channel and avoid VLAs
* Expand MAX44000_REGMASK for readability/reviewability
* Clear irq bits at the end of the probe function
* Only write important bits on probe rather than everything

Crestez Dan Leonard (5):
max44000: Initial support
max44000: Initial support for proximity reading
max44000: Support controlling LED current output
max44000: Expose ambient sensor scaling
max44000: Initial triggered buffer support

drivers/iio/light/Kconfig | 11 +
drivers/iio/light/Makefile | 1 +
drivers/iio/light/max44000.c | 637 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 649 insertions(+)
create mode 100644 drivers/iio/light/max44000.c

--
2.5.5

\
 
 \ /
  Last update: 2016-04-18 17:01    [W:0.092 / U:0.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site