lkml.org 
[lkml]   [2016]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 16/24] ARM: explicitly apply PWM config extracted from pwm_args
From
Date
On 04/14/2016 09:17 PM, Boris Brezillon wrote:
> Call pwm_apply_args() just after requesting the PWM device so that the
> polarity and period are initialized according to the information provided
> in pwm_args.
>
> This is an intermediate state, and pwm_apply_args() should be dropped as
> soon as the atomic PWM infrastructure is in place and the driver makes
> use of it.
>
> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
> ---
> arch/arm/mach-s3c24xx/mach-rx1950.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>

Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2016-04-15 10:41    [W:0.128 / U:25.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site