lkml.org 
[lkml]   [2016]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 11/13] USB: ch341: improve B0 handling
Date
Check for B0 in a more idiomatic way and make sure to not enable
RTS/CTS hardware flow control in B0 as it may override the control
lines. Also make sure to only enable RTS/DTR if there's a transition
from B0.

v2: use c_cflag macros.
v3: rebase.

Signed-off-by: Grigori Goronzy <greg@chown.ath.cx>
---
drivers/usb/serial/ch341.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 22cfd88..3ce2041 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -387,10 +387,12 @@ static void ch341_set_termios(struct tty_struct *tty,
if (C_CSTOPB(tty))
ctrl |= CH341_LCR_STOP_BITS_2;

- if (priv->baud_rate) {
- spin_lock_irqsave(&priv->lock, flags);
- priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS);
- spin_unlock_irqrestore(&priv->lock, flags);
+ if (C_BAUD(tty) != B0) {
+ if (old_termios && (old_termios->c_cflag & CBAUD) == B0) {
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ }
r = ch341_init_set_baudrate(port->serial->dev, priv, ctrl);
if (r < 0 && old_termios) {
priv->baud_rate = tty_termios_baud_rate(old_termios);
@@ -404,7 +406,7 @@ static void ch341_set_termios(struct tty_struct *tty,

ch341_set_handshake(port->serial->dev, priv->line_control);

- if (C_CRTSCTS(tty)) {
+ if (C_CRTSCTS(tty) && C_BAUD(tty) != B0) {
r = ch341_control_out(port->serial->dev, CH341_REQ_WRITE_REG,
CH341_REG_RTSCTS | ((uint16_t)CH341_REG_RTSCTS << 8),
0x0101);
--
1.9.1
\
 
 \ /
  Last update: 2016-04-15 23:21    [W:0.160 / U:0.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site