lkml.org 
[lkml]   [2016]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 2/2] i2c: rk3x: add i2c support for rk3399 soc
> The default frequency rate of function clock is 50M Hz, it can match
> F/S mode, but HS mode not. If use default rate 50M to get 1.7M
> scl-frequency rate , we could not get accurately 1.7M frequecy rate.
> The input-clk-rate is more higher, we get more accurately
> scl-frequency rate, as 200M is a suitable input-clk-rate.
>
> If 200M was used for F/S mode, it would increase power consumption, so
> add a option that could be configured from DT.

If I understand you correctly, couldn't you use clk_set_rate() depending
on the desired scl frequency which is already described in DT as
clock-frequency?

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2016-04-15 20:01    [W:0.082 / U:0.832 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site