lkml.org 
[lkml]   [2016]   [Apr]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 2/3] devicetree: leds: Introduce "panic-indicator" optional property
From
Date
Hi Ezequiel,

On 13/04/16 19:08, Ezequiel Garcia wrote:
> It's desirable to specify which LEDs are to be blinked on a kernel
> panic. Therefore, introduce a devicetree boolean property to mark
> which LEDs should be treated this way, if possible.
>
> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
> ---
> Documentation/devicetree/bindings/leds/common.txt | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
> index 68419843e32f..7b646a7808ce 100644
> --- a/Documentation/devicetree/bindings/leds/common.txt
> +++ b/Documentation/devicetree/bindings/leds/common.txt
> @@ -37,6 +37,9 @@ Optional properties for child nodes:
> property is mandatory for the LEDs in the non-flash modes
> (e.g. torch or indicator).
>
> +- panic-indicator : This properties specifies that the LED should be used,

s/properties/property/

Maybe phrasing it as "should also be used" might make the intention a
bit clearer, as well.

Robin.

> + if at all possible, as a panic indicator.
> +
> Required properties for flash LED child nodes:
> - flash-max-microamp : Maximum flash LED supply current in microamperes.
> - flash-max-timeout-us : Maximum timeout in microseconds after which the flash
>

\
 
 \ /
  Last update: 2016-04-14 19:21    [W:0.414 / U:0.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site