lkml.org 
[lkml]   [2016]   [Apr]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 21/31] mtd: use parity16 in ssfdc.c
On Sun, Mar 27, 2016 at 03:24:59PM +0800, zhaoxiu.zeng wrote:
> From: Zeng Zhaoxiu <zhaoxiu.zeng@gmail.com>
>
> Signed-off-by: Zeng Zhaoxiu <zhaoxiu.zeng@gmail.com>

I'm not CC'd on the rest of this series, where you defined parity16().
And I doubt you've tested this. So I'm not applying.

Brian

> drivers/mtd/ssfdc.c | 20 ++------------------
> 1 file changed, 2 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/mtd/ssfdc.c b/drivers/mtd/ssfdc.c
> index daf82ba..b4d9144 100644
> --- a/drivers/mtd/ssfdc.c
> +++ b/drivers/mtd/ssfdc.c
> @@ -182,24 +182,10 @@ static int read_raw_oob(struct mtd_info *mtd, loff_t offs, uint8_t *buf)
> return 0;
> }
>
> -/* Parity calculator on a word of n bit size */
> -static int get_parity(int number, int size)
> -{
> - int k;
> - int parity;
> -
> - parity = 1;
> - for (k = 0; k < size; k++) {
> - parity += (number >> k);
> - parity &= 1;
> - }
> - return parity;
> -}
> -
> /* Read and validate the logical block address field stored in the OOB */
> static int get_logical_address(uint8_t *oob_buf)
> {
> - int block_address, parity;
> + int block_address;
> int offset[2] = {6, 11}; /* offset of the 2 address fields within OOB */
> int j;
> int ok = 0;
> @@ -215,11 +201,9 @@ static int get_logical_address(uint8_t *oob_buf)
>
> /* Check for the signature bits in the address field (MSBits) */
> if ((block_address & ~0x7FF) == 0x1000) {
> - parity = block_address & 0x01;
> block_address &= 0x7FF;
> - block_address >>= 1;
>
> - if (get_parity(block_address, 10) != parity) {
> + if (!parity16(block_address)) {
> pr_debug("SSFDC_RO: logical address field%d"
> "parity error(0x%04X)\n", j+1,
> block_address);
> --
> 2.5.5
>

\
 
 \ /
  Last update: 2016-04-02 02:01    [W:0.469 / U:0.816 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site