lkml.org 
[lkml]   [2016]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/3] pinctrl: ns2: add pinmux driver support for Broadcom NS2 SoC
From
Date
Hi Linus,

On 3/9/2016 3:04 AM, Linus Walleij wrote:
> On Thu, Mar 3, 2016 at 6:41 PM, Yendapally Reddy Dhananjaya Reddy
> <yendapally.reddy@broadcom.com> wrote:
>
>> This adds the initial support of the Broadcom NS2 pinmux driver
>>
>> Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
>
> Now yet another Broadcom driver!
>
> Can I get the help of the maintainers of the other
> Broadcom drivers to say:
>
> - If this looks sane
>

I've reviewed this driver internally before it was sent out to public.
Here's my reviewed-by:

Reviewed-by: Ray Jui <ray.jui@broadcom.com>

Like I mentioned before, we have been working closely with our ASIC team
to have one pad per register based register layout in our next-gen SoC.
That way we are able to use the generic pinctrl-single driver. It's
definitely our best interest to re-use a generic driver when possible,
to minimize the ongoing maintenance cost. Note we only have control on
chips that we work on; there are other Broadcom SoCs that we do not have
a say, unfortunately.

> - If this hardware looks suspiciously similar to one of the
> other drivers and should rather me a subdriver of one of
> the existing ones

The IOMUX block in NS2 seems different from that of Cygnus and NSP. It
only supports group based mux configuration and does not have any
mechanism to allow GPIO pin function override. It also supports per pad
based pinconf functions.

>
> Yours,
> Linus Walleij
>

Thanks,

Ray

\
 
 \ /
  Last update: 2016-03-09 23:01    [W:1.355 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site