lkml.org 
[lkml]   [2016]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 10/11] tpm: Add documentation for the tpm_vtpm device driver
Date
Add documentation for the tpm_vtpm device driver that implements
support for providing TPM functionality to Linux containers.

Parts of this documentation were recycled from the Xen vTPM
device driver documentation.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
CC: linux-kernel@vger.kernel.org
CC: linux-doc@vger.kernel.org
CC: linux-api@vger.kernel.org
---
Documentation/tpm/tpm_vtpm.txt | 54 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 54 insertions(+)
create mode 100644 Documentation/tpm/tpm_vtpm.txt

diff --git a/Documentation/tpm/tpm_vtpm.txt b/Documentation/tpm/tpm_vtpm.txt
new file mode 100644
index 0000000..d193573
--- /dev/null
+++ b/Documentation/tpm/tpm_vtpm.txt
@@ -0,0 +1,54 @@
+Virtual TPM Device Driver for Linux Containers
+
+Authors: Stefan Berger (IBM)
+
+This document describes the virtual Trusted Platform Module (vTPM) device
+driver for Linux containers.
+
+INTRODUCTION
+------------
+
+The goal of this work is to provide TPM functionality to each Linux
+container. This allows programs to interact with a TPM in a container
+the same way they interact with a TPM on the physical system. Each
+container gets its own unique, emulated, software TPM.
+
+
+DESIGN
+------
+
+To make an emulated software TPM available to each container, the container
+management stack needs to create a device pair consisting of a client TPM
+character device /dev/tpmX (with X=0,1,2...) and a 'server side' file
+descriptor. The former is moved into the container by creating a character
+device with the appropriate major and minor numbers while the file descriptor
+is passed to the TPM emulator. Software inside the container can then send
+TPM commands using the character device and the emulator will receive the
+commands via the file descriptor and use it for sending back responses.
+
+To support this, the virtual TPM device driver provides a device /dev/vtpmx
+that is used to create device pairs using an ioctl. The ioctl takes as
+an input flags for configuring the device. The flags for example indicate
+whether TPM 1.2 or TPM 2 functionality is supported by the TPM emulator.
+The result of the ioctl are the file descriptor for the 'server side'
+as well as the major and minor numbers of the character device that was created.
+Besides that the number of the TPM character device is return. If for
+example /dev/tpm10 was created, the number (dev_num) 10 is returned.
+
+The following is the data structure of the VTPM_NEW_DEV ioctl:
+
+struct vtpm_new_dev {
+ __u32 flags; /* input */
+ __u32 dev_num; /* output */
+ __u32 fd; /* output */
+ __u32 major; /* output */
+ __u32 minor; /* output */
+};
+
+Note that if unsupported flags are passed to the device driver, the ioctl will
+fail and errno will be set to EOPNOTSUPP. Similarly, if an unsupported ioctl is
+called on the device driver, the ioctl will fail and errno will be set to
+ENOTTY.
+
+See /usr/include/linux/vtpm.h for definitions related to the public interface
+of this vTPM device driver.
--
2.4.3
\
 
 \ /
  Last update: 2016-03-09 19:21    [W:0.037 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site