lkml.org 
[lkml]   [2016]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v12 25/29] HMM: split DMA mapping function in two.
Date
To be able to reuse the DMA mapping logic, split it in two functions.

Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
---
mm/hmm.c | 120 ++++++++++++++++++++++++++++++++++-----------------------------
1 file changed, 65 insertions(+), 55 deletions(-)

diff --git a/mm/hmm.c b/mm/hmm.c
index d26abe4..07f1ab6 100644
--- a/mm/hmm.c
+++ b/mm/hmm.c
@@ -910,76 +910,86 @@ static int hmm_mirror_fault_hugetlb_entry(pte_t *ptep,
return 0;
}

+static int hmm_mirror_dma_map_range(struct hmm_mirror *mirror,
+ dma_addr_t *hmm_pte,
+ spinlock_t *lock,
+ unsigned long npages)
+{
+ struct device *dev = mirror->device->dev;
+ unsigned long i;
+ int ret = 0;
+
+ for (i = 0; i < npages; i++) {
+ dma_addr_t dma_addr, pte;
+ struct page *page;
+
+again:
+ pte = ACCESS_ONCE(hmm_pte[i]);
+ if (!hmm_pte_test_valid_pfn(&pte) || !hmm_pte_test_select(&pte))
+ continue;
+
+ page = pfn_to_page(hmm_pte_pfn(pte));
+ VM_BUG_ON(!page);
+ dma_addr = dma_map_page(dev, page, 0, PAGE_SIZE,
+ DMA_BIDIRECTIONAL);
+ if (dma_mapping_error(dev, dma_addr)) {
+ ret = -ENOMEM;
+ break;
+ }
+
+ /*
+ * Make sure we transfer the dirty bit. Note that there
+ * might still be a window for another thread to set
+ * the dirty bit before we check for pte equality. This
+ * will just lead to a useless retry so it is not the
+ * end of the world here.
+ */
+ if (lock)
+ spin_lock(lock);
+ if (hmm_pte_test_dirty(&hmm_pte[i]))
+ hmm_pte_set_dirty(&pte);
+ if (ACCESS_ONCE(hmm_pte[i]) != pte) {
+ if (lock)
+ spin_unlock(lock);
+ dma_unmap_page(dev, dma_addr, PAGE_SIZE,
+ DMA_BIDIRECTIONAL);
+ if (hmm_pte_test_valid_pfn(&hmm_pte[i]))
+ goto again;
+ continue;
+ }
+ hmm_pte[i] = hmm_pte_from_dma_addr(dma_addr);
+ if (hmm_pte_test_write(&pte))
+ hmm_pte_set_write(&hmm_pte[i]);
+ if (hmm_pte_test_dirty(&pte))
+ hmm_pte_set_dirty(&hmm_pte[i]);
+ if (lock)
+ spin_unlock(lock);
+ }
+
+ return ret;
+}
+
static int hmm_mirror_dma_map(struct hmm_mirror *mirror,
struct hmm_pt_iter *iter,
unsigned long start,
unsigned long end)
{
- struct device *dev = mirror->device->dev;
unsigned long addr;
int ret;

for (ret = 0, addr = start; !ret && addr < end;) {
- unsigned long i = 0, next = end;
+ unsigned long next = end, npages;
dma_addr_t *hmm_pte;
+ spinlock_t *lock;

hmm_pte = hmm_pt_iter_populate(iter, addr, &next);
if (!hmm_pte)
return -ENOENT;

- do {
- dma_addr_t dma_addr, pte;
- struct page *page;
-
-again:
- pte = ACCESS_ONCE(hmm_pte[i]);
- if (!hmm_pte_test_valid_pfn(&pte) ||
- !hmm_pte_test_select(&pte)) {
- if (!hmm_pte_test_valid_dma(&pte)) {
- ret = -ENOENT;
- break;
- }
- continue;
- }
-
- page = pfn_to_page(hmm_pte_pfn(pte));
- VM_BUG_ON(!page);
- dma_addr = dma_map_page(dev, page, 0, PAGE_SIZE,
- DMA_BIDIRECTIONAL);
- if (dma_mapping_error(dev, dma_addr)) {
- ret = -ENOMEM;
- break;
- }
-
- hmm_pt_iter_directory_lock(iter);
- /*
- * Make sure we transfer the dirty bit. Note that there
- * might still be a window for another thread to set
- * the dirty bit before we check for pte equality. This
- * will just lead to a useless retry so it is not the
- * end of the world here.
- */
- if (hmm_pte_test_dirty(&hmm_pte[i]))
- hmm_pte_set_dirty(&pte);
- if (ACCESS_ONCE(hmm_pte[i]) != pte) {
- hmm_pt_iter_directory_unlock(iter);
- dma_unmap_page(dev, dma_addr, PAGE_SIZE,
- DMA_BIDIRECTIONAL);
- if (hmm_pte_test_valid_pfn(&pte))
- goto again;
- if (!hmm_pte_test_valid_dma(&pte)) {
- ret = -ENOENT;
- break;
- }
- } else {
- hmm_pte[i] = hmm_pte_from_dma_addr(dma_addr);
- if (hmm_pte_test_write(&pte))
- hmm_pte_set_write(&hmm_pte[i]);
- if (hmm_pte_test_dirty(&pte))
- hmm_pte_set_dirty(&hmm_pte[i]);
- hmm_pt_iter_directory_unlock(iter);
- }
- } while (addr += PAGE_SIZE, i++, addr != next && !ret);
+ npages = (next - addr) >> PAGE_SHIFT;
+ lock = hmm_pt_iter_directory_lock_ptr(iter);
+ ret = hmm_mirror_dma_map_range(mirror, hmm_pte, lock, npages);
+ addr = next;
}

return ret;
--
2.4.3
\
 
 \ /
  Last update: 2016-03-08 21:21    [W:0.236 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site