lkml.org 
[lkml]   [2016]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v8 0/10] watchdog: Add support for keepalives triggered by infrastructure
From
Date
Hi Wim,

any chance to get this series into the next release ?

Thanks,
Guenter

On 02/28/2016 01:12 PM, Guenter Roeck wrote:
> The watchdog infrastructure is currently purely passive, meaning
> it only passes information from user space to drivers and vice versa.
>
> Since watchdog hardware tends to have its own quirks, this can result
> in quite complex watchdog drivers. A number of scanarios are especially common.
>
> - A watchdog is always active and can not be disabled, or can not be disabled
> once enabled. To support such hardware, watchdog drivers have to implement
> their own timers and use those timers to trigger watchdog keepalives while
> the watchdog device is not or not yet opened.
> - A variant of this is the desire to enable a watchdog as soon as its driver
> has been instantiated, to protect the system while it is still booting up,
> but the watchdog daemon is not yet running.
> - Some watchdogs have a very short maximum timeout, in the range of just a few
> seconds. Such low timeouts are difficult if not impossible to support from
> user space. Drivers supporting such watchdog hardware need to implement
> a timer function to augment heartbeats from user space.
>
> This patch set solves the above problems while keeping changes to the
> watchdog core minimal.
>
> - A new status flag, WDOG_HW_RUNNING, informs the watchdog subsystem that
> a watchdog is running, and that the watchdog subsystem needs to generate
> heartbeat requests while the associated watchdog device is closed.
> - A new parameter in the watchdog data structure, max_hw_heartbeat_ms, informs
> the watchdog subsystem about a maximum hardware heartbeat. The watchdog
> subsystem uses this information together with the configured timeout
> and the maximum permitted timeout to determine if it needs to generate
> additional heartbeat requests.
>
> As part of this patchset, the semantics of the 'timeout' variable and of
> the WDOG_ACTIVE flag are changed slightly.
>
> Per the current watchdog kernel API, the 'timeout' variable is supposed
> to reflect the actual hardware watchdog timeout. WDOG_ACTIVE is supposed
> to reflect if the hardware watchdog is running or not.
>
> Unfortunately, this does not always reflect reality. In drivers which solve
> the above mentioned problems internally, 'timeout' is the watchdog timeout
> as seen from user space, and WDOG_ACTIVE reflects that user space is expected
> to send keepalive requests to the watchdog driver.
>
> After this patch set is applied, this so far inofficial interpretation
> is the 'official' semantics for the timeout variable and the WDOG_ACTIVE
> flag. In other words, both values no longer reflect the hardware watchdog
> status, but its status as seen from user space.
>
> Patch #1 makes the set_timeout function optional.
>
> Patch #2 adds timer functionality to the watchdog core. It solves the problem
> of short maximum hardware heartbeats by augmenting heartbeats triggered from
> user space with internally triggered heartbeats.
>
> Patch #3 adds functionality to generate heartbeats while the watchdog device
> is closed. It handles situation where where the watchdog is running after
> the driver has been instantiated, but the device is not yet opened,
> and post-close situations necessary if a watchdog can not be stopped.
>
> Patch #4 makes the stop function optional.
>
> Patch #5 adds code to ensure that the minimum time between heartbeats meets
> constraints provided by the watchdog driver.
>
> Patch #6 to #10 are example conversions of some watchdog drivers.
> Out of those, patches #6 (dw_wdt) and #7 (imx2) have been tested.
> Patches #8 to #10 will require testing and are marked as RFT.
>
> The patch series is also available in branch watchdog-timer of
> git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git.
> The series is curently based on top of v4.5-rc5.
>
> The patch series was inspired by an earlier patch set from Timo Kokonnen.
>
> v8:
> - max_hw_timeout_ms -> max_hw_heartbeat_ms
> - Rebased to v4.5-rc5
> - The patch to make the set_timeout function optional is now the first
> patch of the series.
> - Separate code making the stop function optional into a separate patch.
> - Dropped all Acked-by: and Tested-by: tags. Even though there are no
> functional changes, I concluded that the changes are too substantial
> to warrant maintaining previously provided tags.
> Note: while the patch series was rearranged, correctness was ensured
> by implementing the max_hw_timeout_ms -> max_hw_heartbeat_ms changes
> separately on top of the original series and comparing the results.
> v7:
> - Rebased to v4.5-rc1.
> - Moved new variables to local data structure
> - Fixed typos in documentation (hw_max_timeout_ms -> max_hw_timeout_ms).
> - Enforce that max_hw_timeout_ms must be set if the stop function is
> not implemented by a driver.
> - Set max_hw_timeout_ms in converted drivers.
> v6:
> - Added patch #9, converting the dw_wdt driver.
> - Set last_keepalive more accurately when starting the watchdog.
> - Rebased to v4.4-rc2.
> - Renamed WDOG_RUNNING to WDOG_HW_RUNNING and watchdog_running() to
> watchdog_hw_running().
> v5:
> - Patches #1 and #2 of the original patch series are now in mainline
> and have been dropped.
> - Rebased to v4.4-rc1.
> - Added patch to simplify watchdog_update_worker().
> v4:
> - Rebased to v4.3-rc3
> - Rearranged patch sequence
> - Dropped gpio driver patch. The driver was changed since v4.2,
> and merging the changes turned out to be too difficult.
> - Various other cleanups as listed in individual patches
> v3:
> - Rebased to v4.2-rc8
> - Reworked and cleaned up some of the functions.
> - No longer call the worker update function if all that is needed is to stop
> the worker.
> - max_timeout will now be ignored if max_hw_timeout_ms is provided.
> - Added patch 9/9.
> v2:
> - Rebased to v4.2-rc5
> - Improved and hopefully clarified documentation.
> - Rearranged variables in struct watchdog_device such that internal variables
> come last.
> - The code now ensures that the watchdog times out <timeout> seconds after
> the most recent keepalive sent from user space.
> - The internal keepalive now stops silently and no longer generates a
> warning message. Reason is that it will now stop early, while there
> may still be a substantial amount of time for keepalives from user space
> to arrive. If such keepalives arrive late (for example if user space
> is configured to send keepalives just a few seconds before the watchdog
> times out), the message would just be noise and not provide any value.
> --
> To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>

\
 
 \ /
  Last update: 2016-03-07 05:01    [W:0.569 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site