lkml.org 
[lkml]   [2016]   [Mar]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 4/4] leds: Replace dedicated SN3218 driver with IS31FL32XX driver
On Thu, 03 Mar 2016 15:51:36 +0100
Jacek Anaszewski <j.anaszewski@samsung.com> wrote:

> Hi David,
>
> I'll wait for Tested-by from Stefan before applying this patch.
> If Stefan will have managed to test your driver with his hardware
> by the end of this cycle, it will suffice for this patch to contain
> only leds-is31fl32xx extension part.
>
> leds-sn3218 hasn't been merged to mainline yet, so I'd rather
> remove it when I get Tested-by from Stefan.
>
> Otherwise, I will send leds-sn3218 to Linus, and this patch
> will be applied after being tested, during 4.7 cycle.

Since Stefan has given his Tested-by, do I understand correctly
that you would prefer to:
- revert sn3218 patches 2 and 3 yourself
- have me provide v2 patches that would apply ontop of that

If so, should I do as Rob suggests and fold the sn3216/3218 bits into
the earlier patches, or leave it as a 4th patch? I'd probably prefer
the former as being an easier workflow (less "rebase -i"ing).

And should I base off v4.5-rc6 at that point, or your for-next minus
those patches? The only difference should be a 1-line offset in the
vendor-prefixes.txt hunk. Either way is equally easy for me.

>
> Thanks,
> Jacek Anaszewski
>
> On 03/03/2016 04:01 AM, David Rivshin (Allworx) wrote:
> > From: David Rivshin <drivshin@allworx.com>
> >
> > Si-En Technology was acquired by ISSI in 2011, and it appears that
> > the IS31FL3218/IS31FL3216 are just rebranded SN3218/SN3216 devices.
> > As the IS31FL32XX driver already handles the *3218 devices, there
> > is no longer a need for the dedicated SN3218 driver.
> >
> > Add the "sn,sn3218" and "sn,sn3216" compatible strings into the
> > IS31FL32XX driver and binding documentation, and remove the
> > leds-sn3218 driver.
> >
> > Datasheets:
> > IS31FL3218: http://www.issi.com/WW/pdf/31FL3218.pdf
> > SN3218: http://www.si-en.com/uploadpdf/s2011517171720.pdf
> >
> > IS31FL3216: http://www.issi.com/WW/pdf/31FL3216.pdf
> > SN3216; http://www.si-en.com/uploadpdf/SN3216201152410148.pdf
> >
> > Signed-off-by: David Rivshin <drivshin@allworx.com>
> > ---
> >
> > Note that the leds-sn3218 binding use a 0-based 'reg' property, while
> > the leds-is31fl32xx binding uses a 1-based 'reg' property. This seemed
> > to be the preferred binding based on [1]. Since leds-sn3216 has not been
> > in a released kernel, there is are no backwards-compatibility concerns.
> >
> > Changes from RFC:
> > new
> >
> > [1] http://www.spinics.net/lists/linux-leds/msg05589.html
> >
> > .../devicetree/bindings/leds/leds-is31fl32xx.txt | 9 +-
> > .../devicetree/bindings/leds/leds-sn3218.txt | 41 ---
> > drivers/leds/Kconfig | 18 +-
> > drivers/leds/Makefile | 1 -
> > drivers/leds/leds-is31fl32xx.c | 6 +-
> > drivers/leds/leds-sn3218.c | 306 ---------------------
> > 6 files changed, 14 insertions(+), 367 deletions(-)
> > delete mode 100644 Documentation/devicetree/bindings/leds/leds-sn3218.txt
> > delete mode 100644 drivers/leds/leds-sn3218.c
> >
> > diff --git a/Documentation/devicetree/bindings/leds/leds-is31fl32xx.txt b/Documentation/devicetree/bindings/leds/leds-is31fl32xx.txt
> > index 539df2e..c59eb1a 100644
> > --- a/Documentation/devicetree/bindings/leds/leds-is31fl32xx.txt
> > +++ b/Documentation/devicetree/bindings/leds/leds-is31fl32xx.txt
> > @@ -1,6 +1,6 @@
> > -Binding for ISSI IS31FL32xx LED Drivers
> > +Binding for ISSI IS31FL32xx and Si-En SN32xx LED Drivers
> >
> > -The IS31FL32xx family of LED drivers are I2C devices with multiple
> > +The IS31FL32xx/SN32xx family of LED drivers are I2C devices with multiple
> > constant-current channels, each with independent 256-level PWM control.
> > Each LED is represented as a sub-node of the device.
> >
> > @@ -10,6 +10,8 @@ Required properties:
> > issi,is31fl3235
> > issi,is31fl3218
> > issi,is31fl3216
> > + si-en,sn3218
> > + si-en,sn3216
> > - reg: I2C slave address
> > - address-cells : must be 1
> > - size-cells : must be 0
> > @@ -45,5 +47,6 @@ leds: is31fl3236@3c {
> > };
> > };
> >
> > -For more product information please see the link below:
> > +For more product information please see the links below:
> > http://www.issi.com/US/product-analog-fxled-driver.shtml
> > +http://www.si-en.com/product.asp?parentid=890
> > diff --git a/Documentation/devicetree/bindings/leds/leds-sn3218.txt b/Documentation/devicetree/bindings/leds/leds-sn3218.txt
> > deleted file mode 100644
> > index 19cbf57..0000000
> > --- a/Documentation/devicetree/bindings/leds/leds-sn3218.txt
> > +++ /dev/null
> > @@ -1,41 +0,0 @@
> > -* Si-En Technology - SN3218 18-Channel LED Driver
> > -
> > -Required properties:
> > -- compatible :
> > - "si-en,sn3218"
> > -- address-cells : must be 1
> > -- size-cells : must be 0
> > -- reg : I2C slave address, typically 0x54
> > -
> > -There must be at least 1 LED which is represented as a sub-node
> > -of the sn3218 device.
> > -
> > -LED sub-node properties:
> > -- label : (optional) see Documentation/devicetree/bindings/leds/common.txt
> > -- reg : number of LED line (could be from 0 to 17)
> > -- linux,default-trigger : (optional)
> > - see Documentation/devicetree/bindings/leds/common.txt
> > -
> > -Example:
> > -
> > -sn3218: led-controller@54 {
> > - compatible = "si-en,sn3218";
> > - #address-cells = <1>;
> > - #size-cells = <0>;
> > - reg = <0x54>;
> > -
> > - led@0 {
> > - label = "led1";
> > - reg = <0x0>;
> > - };
> > -
> > - led@1 {
> > - label = "led2";
> > - reg = <0x1>;
> > - };
> > -
> > - led@2 {
> > - label = "led3";
> > - reg = <0x2>;
> > - };
> > -};
> > diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> > index 9c63ba4..1f64151 100644
> > --- a/drivers/leds/Kconfig
> > +++ b/drivers/leds/Kconfig
> > @@ -568,25 +568,13 @@ config LEDS_SEAD3
> > This driver can also be built as a module. If so the module
> > will be called leds-sead3.
> >
> > -config LEDS_SN3218
> > - tristate "LED support for Si-En SN3218 I2C chip"
> > - depends on LEDS_CLASS && I2C
> > - depends on OF
> > - select REGMAP_I2C
> > - help
> > - This option enables support for the Si-EN SN3218 LED driver
> > - connected through I2C. Say Y to enable support for the SN3218 LED.
> > -
> > - This driver can also be built as a module. If so the module
> > - will be called leds-sn3218.
> > -
> > config LEDS_IS31FL32XX
> > tristate "LED support for ISSI IS31FL32XX I2C LED controller family"
> > depends on LEDS_CLASS && I2C && OF
> > help
> > - Say Y here to include support for ISSI IS31FL32XX LED controllers.
> > - They are I2C devices with multiple constant-current channels, each
> > - with independent 256-level PWM control.
> > + Say Y here to include support for ISSI IS31FL32XX and Si-En SN32xx
> > + LED controllers. They are I2C devices with multiple constant-current
> > + channels, each with independent 256-level PWM control.
> >
> > comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)"
> >
> > diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> > index 3fdf313..cb2013d 100644
> > --- a/drivers/leds/Makefile
> > +++ b/drivers/leds/Makefile
> > @@ -66,7 +66,6 @@ obj-$(CONFIG_LEDS_MENF21BMC) += leds-menf21bmc.o
> > obj-$(CONFIG_LEDS_KTD2692) += leds-ktd2692.o
> > obj-$(CONFIG_LEDS_POWERNV) += leds-powernv.o
> > obj-$(CONFIG_LEDS_SEAD3) += leds-sead3.o
> > -obj-$(CONFIG_LEDS_SN3218) += leds-sn3218.o
> > obj-$(CONFIG_LEDS_IS31FL32XX) += leds-is31fl32xx.o
> >
> > # LED SPI Drivers
> > diff --git a/drivers/leds/leds-is31fl32xx.c b/drivers/leds/leds-is31fl32xx.c
> > index 49818f0..ec3f541 100644
> > --- a/drivers/leds/leds-is31fl32xx.c
> > +++ b/drivers/leds/leds-is31fl32xx.c
> > @@ -10,7 +10,9 @@
> > * it under the terms of the GNU General Public License version 2 as
> > * published by the Free Software Foundation.
> > *
> > - * Datasheets: http://www.issi.com/US/product-analog-fxled-driver.shtml
> > + * Datasheets:
> > + * http://www.issi.com/US/product-analog-fxled-driver.shtml
> > + * http://www.si-en.com/product.asp?parentid=890
> > */
> >
> > #include <linux/err.h>
> > @@ -425,7 +427,9 @@ static const struct of_device_id of_is31fl31xx_match[] = {
> > { .compatible = "issi,is31fl3236", .data = &is31fl3236_cdef, },
> > { .compatible = "issi,is31fl3235", .data = &is31fl3235_cdef, },
> > { .compatible = "issi,is31fl3218", .data = &is31fl3218_cdef, },
> > + { .compatible = "si-en,sn3218", .data = &is31fl3218_cdef, },
> > { .compatible = "issi,is31fl3216", .data = &is31fl3216_cdef, },
> > + { .compatible = "si-en,sn3216", .data = &is31fl3216_cdef, },
> > {},
> > };
> >
> > diff --git a/drivers/leds/leds-sn3218.c b/drivers/leds/leds-sn3218.c
> > deleted file mode 100644
> > index dcc2581..0000000
> > --- a/drivers/leds/leds-sn3218.c
> > +++ /dev/null
> > @@ -1,306 +0,0 @@
> > -/*
> > - * Si-En SN3218 18 Channel LED Driver
> > - *
> > - * Copyright (C) 2016 Stefan Wahren <stefan.wahren@i2se.com>
> > - *
> > - * Based on leds-pca963x.c
> > - *
> > - * This program is free software; you can redistribute it and/or
> > - * modify it under the terms of the GNU General Public License
> > - * version 2 as published by the Free Software Foundation.
> > - *
> > - * Datasheet: http://www.si-en.com/uploadpdf/s2011517171720.pdf
> > - *
> > - */
> > -
> > -#include <linux/err.h>
> > -#include <linux/i2c.h>
> > -#include <linux/leds.h>
> > -#include <linux/module.h>
> > -#include <linux/of.h>
> > -#include <linux/regmap.h>
> > -#include <linux/slab.h>
> > -
> > -#define SN3218_MODE 0x00
> > -#define SN3218_PWM_1 0x01
> > -#define SN3218_PWM_2 0x02
> > -#define SN3218_PWM_3 0x03
> > -#define SN3218_PWM_4 0x04
> > -#define SN3218_PWM_5 0x05
> > -#define SN3218_PWM_6 0x06
> > -#define SN3218_PWM_7 0x07
> > -#define SN3218_PWM_8 0x08
> > -#define SN3218_PWM_9 0x09
> > -#define SN3218_PWM_10 0x0a
> > -#define SN3218_PWM_11 0x0b
> > -#define SN3218_PWM_12 0x0c
> > -#define SN3218_PWM_13 0x0d
> > -#define SN3218_PWM_14 0x0e
> > -#define SN3218_PWM_15 0x0f
> > -#define SN3218_PWM_16 0x10
> > -#define SN3218_PWM_17 0x11
> > -#define SN3218_PWM_18 0x12
> > -#define SN3218_LED_1_6 0x13
> > -#define SN3218_LED_7_12 0x14
> > -#define SN3218_LED_13_18 0x15
> > -#define SN3218_UPDATE 0x16 /* applies to reg 0x01 .. 0x15 */
> > -#define SN3218_RESET 0x17
> > -
> > -#define SN3218_LED_MASK 0x3f
> > -#define SN3218_LED_ON 0x01
> > -#define SN3218_LED_OFF 0x00
> > -
> > -#define SN3218_MODE_SHUTDOWN 0x00
> > -#define SN3218_MODE_NORMAL 0x01
> > -
> > -#define NUM_LEDS 18
> > -
> > -struct sn3218_led;
> > -
> > -/**
> > - * struct sn3218 -
> > - * @client - Pointer to the I2C client
> > - * @leds - Pointer to the individual LEDs
> > - * @num_leds - Actual number of LEDs
> > -**/
> > -struct sn3218 {
> > - struct i2c_client *client;
> > - struct regmap *regmap;
> > - struct sn3218_led *leds;
> > - int num_leds;
> > -};
> > -
> > -/**
> > - * struct sn3218_led -
> > - * @chip - Pointer to the container
> > - * @led_cdev - led class device pointer
> > - * @led_num - LED index ( 0 .. 17 )
> > -**/
> > -struct sn3218_led {
> > - struct sn3218 *chip;
> > - struct led_classdev led_cdev;
> > - int led_num;
> > -};
> > -
> > -static int sn3218_led_set(struct led_classdev *led_cdev,
> > - enum led_brightness brightness)
> > -{
> > - struct sn3218_led *led =
> > - container_of(led_cdev, struct sn3218_led, led_cdev);
> > - struct regmap *regmap = led->chip->regmap;
> > - u8 bank = led->led_num / 6;
> > - u8 mask = 0x1 << (led->led_num % 6);
> > - u8 val;
> > - int ret;
> > -
> > - if (brightness == LED_OFF)
> > - val = 0;
> > - else
> > - val = mask;
> > -
> > - ret = regmap_update_bits(regmap, SN3218_LED_1_6 + bank, mask, val);
> > - if (ret < 0)
> > - return ret;
> > -
> > - if (brightness > LED_OFF) {
> > - ret = regmap_write(regmap, SN3218_PWM_1 + led->led_num,
> > - brightness);
> > - if (ret < 0)
> > - return ret;
> > - }
> > -
> > - ret = regmap_write(regmap, SN3218_UPDATE, 0xff);
> > -
> > - return ret;
> > -}
> > -
> > -static void sn3218_led_init(struct sn3218 *sn3218, struct device_node *node,
> > - u32 reg)
> > -{
> > - struct sn3218_led *leds = sn3218->leds;
> > - struct led_classdev *cdev = &leds[reg].led_cdev;
> > -
> > - leds[reg].led_num = reg;
> > - leds[reg].chip = sn3218;
> > -
> > - if (of_property_read_string(node, "label", &cdev->name))
> > - cdev->name = node->name;
> > -
> > - of_property_read_string(node, "linux,default-trigger",
> > - &cdev->default_trigger);
> > -
> > - cdev->brightness_set_blocking = sn3218_led_set;
> > -}
> > -
> > -static const struct reg_default sn3218_reg_defs[] = {
> > - { SN3218_MODE, 0x00},
> > - { SN3218_PWM_1, 0x00},
> > - { SN3218_PWM_2, 0x00},
> > - { SN3218_PWM_3, 0x00},
> > - { SN3218_PWM_4, 0x00},
> > - { SN3218_PWM_5, 0x00},
> > - { SN3218_PWM_6, 0x00},
> > - { SN3218_PWM_7, 0x00},
> > - { SN3218_PWM_8, 0x00},
> > - { SN3218_PWM_9, 0x00},
> > - { SN3218_PWM_10, 0x00},
> > - { SN3218_PWM_11, 0x00},
> > - { SN3218_PWM_12, 0x00},
> > - { SN3218_PWM_13, 0x00},
> > - { SN3218_PWM_14, 0x00},
> > - { SN3218_PWM_15, 0x00},
> > - { SN3218_PWM_16, 0x00},
> > - { SN3218_PWM_17, 0x00},
> > - { SN3218_PWM_18, 0x00},
> > - { SN3218_LED_1_6, 0x00},
> > - { SN3218_LED_7_12, 0x00},
> > - { SN3218_LED_13_18, 0x00},
> > - { SN3218_UPDATE, 0x00},
> > - { SN3218_RESET, 0x00},
> > -};
> > -
> > -static const struct regmap_config sn3218_regmap_config = {
> > - .reg_bits = 8,
> > - .val_bits = 8,
> > -
> > - .max_register = SN3218_RESET,
> > - .reg_defaults = sn3218_reg_defs,
> > - .num_reg_defaults = ARRAY_SIZE(sn3218_reg_defs),
> > - .cache_type = REGCACHE_RBTREE,
> > -};
> > -
> > -static int sn3218_init(struct i2c_client *client, struct sn3218 *sn3218)
> > -{
> > - struct device_node *np = client->dev.of_node, *child;
> > - struct sn3218_led *leds;
> > - int ret, count;
> > -
> > - count = of_get_child_count(np);
> > - if (!count)
> > - return -ENODEV;
> > -
> > - if (count > NUM_LEDS) {
> > - dev_err(&client->dev, "Invalid LED count %d\n", count);
> > - return -EINVAL;
> > - }
> > -
> > - leds = devm_kzalloc(&client->dev, count * sizeof(*leds), GFP_KERNEL);
> > - if (!leds)
> > - return -ENOMEM;
> > -
> > - sn3218->leds = leds;
> > - sn3218->num_leds = count;
> > - sn3218->client = client;
> > -
> > - sn3218->regmap = devm_regmap_init_i2c(client, &sn3218_regmap_config);
> > - if (IS_ERR(sn3218->regmap)) {
> > - ret = PTR_ERR(sn3218->regmap);
> > - dev_err(&client->dev, "Failed to allocate register map: %d\n",
> > - ret);
> > - return ret;
> > - }
> > -
> > - for_each_child_of_node(np, child) {
> > - u32 reg;
> > -
> > - ret = of_property_read_u32(child, "reg", &reg);
> > - if (ret)
> > - goto fail;
> > -
> > - if (reg >= count) {
> > - dev_err(&client->dev, "Invalid LED (%u >= %d)\n", reg,
> > - count);
> > - ret = -EINVAL;
> > - goto fail;
> > - }
> > -
> > - sn3218_led_init(sn3218, child, reg);
> > - }
> > -
> > - return 0;
> > -
> > -fail:
> > - of_node_put(child);
> > - return ret;
> > -}
> > -
> > -static int sn3218_probe(struct i2c_client *client,
> > - const struct i2c_device_id *id)
> > -{
> > - struct sn3218 *sn3218;
> > - struct sn3218_led *leds;
> > - struct device *dev = &client->dev;
> > - int i, ret;
> > -
> > - sn3218 = devm_kzalloc(dev, sizeof(*sn3218), GFP_KERNEL);
> > - if (!sn3218)
> > - return -ENOMEM;
> > -
> > - ret = sn3218_init(client, sn3218);
> > - if (ret)
> > - return ret;
> > -
> > - i2c_set_clientdata(client, sn3218);
> > - leds = sn3218->leds;
> > -
> > - /*
> > - * Since the chip is write-only we need to reset him into
> > - * a defined state (all LEDs off).
> > - */
> > - ret = regmap_write(sn3218->regmap, SN3218_RESET, 0xff);
> > - if (ret)
> > - return ret;
> > -
> > - for (i = 0; i < sn3218->num_leds; i++) {
> > - ret = devm_led_classdev_register(dev, &leds[i].led_cdev);
> > - if (ret < 0)
> > - return ret;
> > - }
> > -
> > - return regmap_write(sn3218->regmap, SN3218_MODE, SN3218_MODE_NORMAL);
> > -}
> > -
> > -static int sn3218_remove(struct i2c_client *client)
> > -{
> > - struct sn3218 *sn3218 = i2c_get_clientdata(client);
> > -
> > - regmap_write(sn3218->regmap, SN3218_MODE, SN3218_MODE_SHUTDOWN);
> > -
> > - return 0;
> > -}
> > -
> > -static void sn3218_shutdown(struct i2c_client *client)
> > -{
> > - struct sn3218 *sn3218 = i2c_get_clientdata(client);
> > -
> > - regmap_write(sn3218->regmap, SN3218_MODE, SN3218_MODE_SHUTDOWN);
> > -}
> > -
> > -static const struct i2c_device_id sn3218_id[] = {
> > - { "sn3218", 0 },
> > - { }
> > -};
> > -MODULE_DEVICE_TABLE(i2c, sn3218_id);
> > -
> > -static const struct of_device_id of_sn3218_match[] = {
> > - { .compatible = "si-en,sn3218", },
> > - {},
> > -};
> > -MODULE_DEVICE_TABLE(of, of_sn3218_match);
> > -
> > -static struct i2c_driver sn3218_driver = {
> > - .driver = {
> > - .name = "leds-sn3218",
> > - .of_match_table = of_match_ptr(of_sn3218_match),
> > - },
> > - .probe = sn3218_probe,
> > - .remove = sn3218_remove,
> > - .shutdown = sn3218_shutdown,
> > - .id_table = sn3218_id,
> > -};
> > -
> > -module_i2c_driver(sn3218_driver);
> > -
> > -MODULE_DESCRIPTION("Si-En SN3218 LED Driver");
> > -MODULE_AUTHOR("Stefan Wahren <stefan.wahren@i2se.com>");
> > -MODULE_LICENSE("GPL v2");

\
 
 \ /
  Last update: 2016-03-05 07:03    [W:0.209 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site