Messages in this thread | | | Date | Fri, 4 Mar 2016 22:28:11 -0600 | From | Rob Herring <> | Subject | Re: [PATCH 1/2] Documentation: synopsys-dw-mshc: add binding for resets |
| |
On Thu, Mar 03, 2016 at 09:33:37AM +0800, Guodong Xu wrote: > Add resets property to synopsys-dw-mshc bindings. It is intended to > represent the hardware reset signal present internally in some host > controller IC designs. > > See Documentation/devicetree/bindings/reset/reset.txt for details. > > Signed-off-by: Guodong Xu <guodong.xu@linaro.org> > --- > Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt | 6 +++++- > 1 file changed, 5 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt > index 8636f5a..9b4896c 100644 > --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt > +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt > @@ -39,6 +39,10 @@ Required Properties: > > Optional properties: > > +* resets: phandle + reset specifier pair, intended to represent hardware > + reset signal present internally in some host controller IC designs. > + See Documentation/devicetree/bindings/reset/reset.txt for details. > + > * clocks: from common clock binding: handle to biu and ciu clocks for the > bus interface unit clock and the card interface unit clock. > > @@ -48,7 +52,7 @@ Optional properties: > clock-frequency. It is an error to omit both the ciu clock and the > clock-frequency. > > -* clock-frequency: should be the frequency (in Hz) of the ciu clock. If this > +* clock-frequency: should be tke frequency (in Hz) of the ciu clock. If this
You've added a typo here.
Otherwise,
Acked-by: Rob Herring <robh@kernel.org>
| |