lkml.org 
[lkml]   [2016]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] regulator: DT: Add support to scale ramp delay based on platform behavior

On Friday 01 April 2016 12:29 AM, Mark Brown wrote:
> * PGP Signed by an unknown key
>
> On Fri, Apr 01, 2016 at 12:09:18AM +0530, Laxman Dewangan wrote:
>
>> The setting for observed value is not there for device configuration.
>> Device support 5mV/us and 100mV/us.
>> We observed 50mV/us when setting device to 100mV/us.
> But you said the device had a configuration for 50mV/us?
I looked for last 4 communication and tried to find out if any typo on
mail so that I can correct but did not found.

/**
Here is the case,
PMIC supports 2 ramp time configurations 5mv/us and 100mV/us. This is
supported with some specific capacitance in rail output per
recommendation from PMIC
**/

So may be more older may have..

But here is the stuff without typo ;-)
Device supports 5mV/us and 100mV/us which is not in observed value.

And this is the only reason for requesting of second property.


\
 
 \ /
  Last update: 2016-03-31 21:21    [W:0.090 / U:1.696 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site