lkml.org 
[lkml]   [2016]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv2 7/8] ARM: dts: imx6: add support for more Ka-Ro electronics modules
Hi,

On Thu, 31 Mar 2016 14:10:23 +0800 Shawn Guo wrote:
> On Tue, Mar 08, 2016 at 09:04:03AM +0100, Lothar Waßmann wrote:
> > Add support for the following i.MX6 based modules from Ka-Ro
> > electronics GmbH:
> > TX6S-8034:
> > Processor Freescale i.MX 6 Solo, 800MHz
> > RAM 256MiB DDR3 SDRAM
> > ROM 128MiB NAND Flash
> > Power supply Single 3.1V to 5.5V
> > Size 31mm SO-DIMM
> > Temp. Range industrial grade (-40°C/-25°C to 105°C Tj)
> >
> > TX6S-8035:
> > Processor Freescale i.MX 6 Solo, 800MHz
> > RAM 512MiB DDR3 SDRAM
> > ROM 4GiB eMMC
> > Power supply Single 3.1V to 5.5V
> > Size 31mm SO-DIMM
> > Temp. Range industrial grade (-40°C/-25°C to 105°C Tj)
> >
> > TX6U-8033:
> > Processor Freescale i.MX 6 Dual Lite, 800MHz
> > RAM 1GiB DDR3 SDRAM
> > ROM 4GiB eMMC
> > Power supply Single 3.1V to 5.5V
> > Size 31mm SO-DIMM
> > Temp. Range industrial grade (-40°C/-25°C to 105°C Tj)
> >
> > TX6Q-1036:
> > Processor Freescale i.MX 6Quad, 1GHz
> > RAM 1GB DDR3 SDRAM 64-bit
> > ROM 8GiB eMMC
> > Power supply Single 3.1V to 5.5V
> > Size 31mm SO-DIMM
> > Temp. Range Extended Consumer Grade (-20°C to 105°C Tj)
> >
> > Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
> > ---
> > arch/arm/boot/dts/Makefile | 4 +
> > arch/arm/boot/dts/imx6dl-tx6s-8034.dts | 249 ++++++++++++++++++++++++++++
> > arch/arm/boot/dts/imx6dl-tx6s-8035.dts | 246 +++++++++++++++++++++++++++
> > arch/arm/boot/dts/imx6dl-tx6u-8033.dts | 248 +++++++++++++++++++++++++++
> > arch/arm/boot/dts/imx6q-tx6q-1036.dts | 295 +++++++++++++++++++++++++++++++++
> > 5 files changed, 1042 insertions(+)
> > create mode 100644 arch/arm/boot/dts/imx6dl-tx6s-8034.dts
> > create mode 100644 arch/arm/boot/dts/imx6dl-tx6s-8035.dts
> > create mode 100644 arch/arm/boot/dts/imx6dl-tx6u-8033.dts
> > create mode 100644 arch/arm/boot/dts/imx6q-tx6q-1036.dts
> >
> > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > index 072294f..71b5cd3 100644
> > --- a/arch/arm/boot/dts/Makefile
> > +++ b/arch/arm/boot/dts/Makefile
> > @@ -320,6 +320,9 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
> > imx6dl-sabrelite.dtb \
> > imx6dl-sabresd.dtb \
> > imx6dl-tx6dl-comtft.dtb \
> > + imx6dl-tx6s-8034.dtb \
> > + imx6dl-tx6s-8035.dtb \
> > + imx6dl-tx6u-8033.dtb \
>
> imx6dl-tx6u-8033.dtb should go after imx6dl-tx6u-801x.dtb?
>
Of course. I obviously missed this when dropping the patch to rename
the dtb files which you rejected.


NB: There is no need to quote the full original mail when you have no
further comments on the remaining part. This would save people
from having to scroll through the mail needlessly looking for further
comments.


Lothar Waßmann

\
 
 \ /
  Last update: 2016-03-31 09:01    [W:0.071 / U:0.560 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site