lkml.org 
[lkml]   [2016]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] regulator: qcom_spmi: Add slewing delays for all SMPS types
Date
Quoting Georgi Djakov (2016-03-30 07:36:11)
> On 03/30/2016 01:58 AM, Stephen Boyd wrote:
> > Only the FT SMPS type regulators have slewing supported in the
> > driver, but all types of SMPS regulators need the same support.
> > The only difference is that some SMPS regulators don't have a
> > step size and the step delay is typically 20, not 8. Luckily, the
> > step size reads as 0 for the non-FT types, so we can always read
> > that, but we need to detect which type of regulator we're using
> > to figure out what step delay to use. Make these minor
> > adjustments to the slew rate calculations and add support for the
> > delay function to the appropriate regulator ops.
> >
> > Reported-by: Georgi Djakov <georgi.djakov@linaro.org>
> > Cc: David Collins <collinsd@codeaurora.org>
> > Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
>
> Thanks for the patch! I have verified it by applying this one
> on top: https://lkml.org/lkml/2016/3/30/381
>
> Tested-by: Georgi Djakov <georgi.djakov@linaro.org>
>

Thanks for testing. I'll pick up the rest on the other thread.

\
 
 \ /
  Last update: 2016-03-30 20:21    [W:0.045 / U:0.616 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site