lkml.org 
[lkml]   [2016]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 22/50] mtd: nand: atmel: switch to mtd_ooblayout_ops
Date
Implementing the mtd_ooblayout_ops interface is the new way of exposing
ECC/OOB layout to MTD users.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/mtd/nand/atmel_nand.c | 84 ++++++++++++++++++++-----------------------
1 file changed, 38 insertions(+), 46 deletions(-)

diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 321d331..46a601e 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -72,30 +72,44 @@ struct atmel_nand_nfc_caps {
uint32_t rb_mask;
};

-/* oob layout for large page size
+/*
+ * oob layout for large page size
* bad block info is on bytes 0 and 1
* the bytes have to be consecutives to avoid
* several NAND_CMD_RNDOUT during read
- */
-static struct nand_ecclayout atmel_oobinfo_large = {
- .eccbytes = 4,
- .eccpos = {60, 61, 62, 63},
- .oobfree = {
- {2, 58}
- },
-};
-
-/* oob layout for small page size
+ *
+ * oob layout for small page size
* bad block info is on bytes 4 and 5
* the bytes have to be consecutives to avoid
* several NAND_CMD_RNDOUT during read
*/
-static struct nand_ecclayout atmel_oobinfo_small = {
- .eccbytes = 4,
- .eccpos = {0, 1, 2, 3},
- .oobfree = {
- {6, 10}
- },
+static int atmel_ooblayout_ecc_sp(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section)
+ return -ERANGE;
+
+ oobregion->length = 4;
+ oobregion->offset = 0;
+
+ return 0;
+}
+
+static int atmel_ooblayout_free_sp(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section)
+ return -ERANGE;
+
+ oobregion->offset = 6;
+ oobregion->length = mtd->oobsize - oobregion->offset;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops atmel_ooblayout_sp_ops = {
+ .ecc = atmel_ooblayout_ecc_sp,
+ .free = atmel_ooblayout_free_sp,
};

struct atmel_nfc {
@@ -163,8 +177,6 @@ struct atmel_nand_host {
int *pmecc_delta;
};

-static struct nand_ecclayout atmel_pmecc_oobinfo;
-
/*
* Enable NAND.
*/
@@ -483,22 +495,6 @@ static int pmecc_get_ecc_bytes(int cap, int sector_size)
return (m * cap + 7) / 8;
}

-static void pmecc_config_ecc_layout(struct nand_ecclayout *layout,
- int oobsize, int ecc_len)
-{
- int i;
-
- layout->eccbytes = ecc_len;
-
- /* ECC will occupy the last ecc_len bytes continuously */
- for (i = 0; i < ecc_len; i++)
- layout->eccpos[i] = oobsize - ecc_len + i;
-
- layout->oobfree[0].offset = PMECC_OOB_RESERVED_BYTES;
- layout->oobfree[0].length =
- oobsize - ecc_len - layout->oobfree[0].offset;
-}
-
static void __iomem *pmecc_get_alpha_to(struct atmel_nand_host *host)
{
int table_size;
@@ -1013,8 +1009,8 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd)
{
struct nand_chip *nand_chip = mtd_to_nand(mtd);
struct atmel_nand_host *host = nand_get_controller_data(nand_chip);
+ int eccbytes = mtd_ooblayout_count_eccbytes(mtd);
uint32_t val = 0;
- struct nand_ecclayout *ecc_layout;
struct mtd_oob_region oobregion;

pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST);
@@ -1065,12 +1061,11 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd)
| PMECC_CFG_AUTO_DISABLE);
pmecc_writel(host->ecc, CFG, val);

- ecc_layout = nand_chip->ecc.layout;
pmecc_writel(host->ecc, SAREA, mtd->oobsize - 1);
mtd_ooblayout_ecc(mtd, 0, &oobregion);
pmecc_writel(host->ecc, SADDR, oobregion.offset);
pmecc_writel(host->ecc, EADDR,
- oobregion.offset + ecc_layout->eccbytes - 1);
+ oobregion.offset + eccbytes - 1);
/* See datasheet about PMECC Clock Control Register */
pmecc_writel(host->ecc, CLK, 2);
pmecc_writel(host->ecc, IDR, 0xff);
@@ -1292,11 +1287,8 @@ static int atmel_pmecc_nand_init_params(struct platform_device *pdev,
err_no = -EINVAL;
goto err;
}
- pmecc_config_ecc_layout(&atmel_pmecc_oobinfo,
- mtd->oobsize,
- nand_chip->ecc.total);

- nand_chip->ecc.layout = &atmel_pmecc_oobinfo;
+ mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
break;
default:
dev_warn(host->dev,
@@ -1644,19 +1636,19 @@ static int atmel_hw_nand_init_params(struct platform_device *pdev,
/* set ECC page size and oob layout */
switch (mtd->writesize) {
case 512:
- nand_chip->ecc.layout = &atmel_oobinfo_small;
+ mtd_set_ooblayout(mtd, &atmel_ooblayout_sp_ops);
ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_528);
break;
case 1024:
- nand_chip->ecc.layout = &atmel_oobinfo_large;
+ mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_1056);
break;
case 2048:
- nand_chip->ecc.layout = &atmel_oobinfo_large;
+ mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_2112);
break;
case 4096:
- nand_chip->ecc.layout = &atmel_oobinfo_large;
+ mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_4224);
break;
default:
--
2.5.0
\
 
 \ /
  Last update: 2016-03-30 19:21    [W:0.206 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site