lkml.org 
[lkml]   [2016]   [Mar]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH] clockevents/drivers/arm_global_timer: Fix erratum 740657 workaround
    Date
    From: Rabin Vincent <rabinv@axis.com>

    According to the errata document for the Cortex A9 MPCore, the correct
    code sequence in the interrupt handler to workaround erratum 740657
    "Global Timer can send two interrupts for the same event" is:

    (1) Read the ICCIAR (Interrupt Acknowledge) register
    (2) Modify the comparator value, to set it to a higher value
    (3) Clear the Global Timer flag
    (4) Clear the Pending Status information for Interrupt 27 (Global
    Timer interrupt) in the Distributor of the Interrupt Controller.
    (5) Write the ICCEOIR (End of Interrupt) register

    (1) and (5) are done by the GIC driver and (2) and (3) are done by the
    Global Timer driver. However, nobody does (4) and thus the workaround
    is inactive and the timer triggers many spurious interrupts:

    <idle>-0 [001] d.h2 99.850527: irq_handler_entry: irq=16 name=gt
    <idle>-0 [001] d.h2 99.850538: irq_handler_exit: irq=16 ret=handled
    <idle>-0 [001] d.H2 99.850540: irq_handler_entry: irq=16 name=gt
    <idle>-0 [001] d.H2 99.850542: irq_handler_exit: irq=16 ret=unhandled
    <idle>-0 [001] d.h2 99.987832: irq_handler_entry: irq=16 name=gt
    <idle>-0 [001] dnh2 99.987845: irq_handler_exit: irq=16 ret=handled
    <idle>-0 [001] dnh2 99.987848: irq_handler_entry: irq=16 name=gt
    <idle>-0 [001] dnh2 99.987850: irq_handler_exit: irq=16 ret=unhandled

    Make the Global Timer driver perform step (4) via the GIC driver with
    the help of the irq_set_irqchip_state() function, to prevent the
    spurious interrupts.

    Signed-off-by: Rabin Vincent <rabinv@axis.com>
    ---
    drivers/clocksource/arm_global_timer.c | 21 +++++++++++++--------
    1 file changed, 13 insertions(+), 8 deletions(-)

    diff --git a/drivers/clocksource/arm_global_timer.c b/drivers/clocksource/arm_global_timer.c
    index 9df0d16..b9d0f86 100644
    --- a/drivers/clocksource/arm_global_timer.c
    +++ b/drivers/clocksource/arm_global_timer.c
    @@ -140,26 +140,31 @@ static int gt_clockevent_set_next_event(unsigned long evt,
    static irqreturn_t gt_clockevent_interrupt(int irq, void *dev_id)
    {
    struct clock_event_device *evt = dev_id;
    + bool workaround = clockevent_state_oneshot(evt);

    if (!(readl_relaxed(gt_base + GT_INT_STATUS) &
    GT_INT_STATUS_EVENT_FLAG))
    return IRQ_NONE;

    /**
    - * ERRATA 740657( Global Timer can send 2 interrupts for
    + * ERRATA 740657 (Global Timer can send 2 interrupts for
    * the same event in single-shot mode)
    * Workaround:
    - * Either disable single-shot mode.
    - * Or
    - * Modify the Interrupt Handler to avoid the
    - * offending sequence. This is achieved by clearing
    - * the Global Timer flag _after_ having incremented
    - * the Comparator register value to a higher value.
    + * - Read the ICCIAR (Interrupt Acknowledge) register
    + * - Modify the comparator value, to set it to a higher value
    + * - Clear the Global Timer flag
    + * - Clear the Pending Status information for Interrupt 27 (Global
    + * Timer interrupt) in the Distributor of the Interrupt Controller.
    + * - Write the ICCEOIR (End of Interrupt) register
    */
    - if (clockevent_state_oneshot(evt))
    + if (workaround)
    gt_compare_set(ULONG_MAX, 0);

    writel_relaxed(GT_INT_STATUS_EVENT_FLAG, gt_base + GT_INT_STATUS);
    +
    + if (workaround)
    + irq_set_irqchip_state(irq, IRQCHIP_STATE_PENDING, false);
    +
    evt->event_handler(evt);

    return IRQ_HANDLED;
    --
    2.7.0
    \
     
     \ /
      Last update: 2016-03-29 11:02    [W:6.683 / U:0.024 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site