lkml.org 
[lkml]   [2016]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v2 3/6] Documentation: DT: vdma: update binding doc for AXI DMA
Date
Hi Soren,

> -----Original Message-----
> From: Sören Brinkmann [mailto:soren.brinkmann@xilinx.com]
> Sent: Monday, March 28, 2016 12:56 AM
> To: Appana Durga Kedareswara Rao
> Cc: robh+dt@kernel.org; pawel.moll@arm.com; mark.rutland@arm.com;
> ijc+devicetree@hellion.org.uk; galak@codeaurora.org; Michal Simek;
> vinod.koul@intel.com; dan.j.williams@intel.com; Anurag Kumar Vulisha; Appana
> Durga Kedareswara Rao; moritz.fischer@ettus.com;
> laurent.pinchart@ideasonboard.com; luis@debethencourt.com; Srikanth
> Vemula; Anirudha Sarangi; devicetree@vger.kernel.org; linux-arm-
> kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
> dmaengine@vger.kernel.org
> Subject: Re: [PATCH v2 3/6] Documentation: DT: vdma: update binding doc for
> AXI DMA
>
> On Sun, 2016-03-27 at 23:36:05 +0530, Kedareswara rao Appana wrote:
> > This patch updates the device-tree binding doc for adding support for
> > AXI DMA.
> >
> > Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
> > ---
> > Changes for v2:
> > ---> Modified commit message as suggested by Vinod.
> > ---> Moved the patch to forward in the series as suggested by vinod.
> >
> > .../devicetree/bindings/dma/xilinx/xilinx_vdma.txt | 22
> > +++++++++++++++++++++-
> > 1 file changed, 21 insertions(+), 1 deletion(-)
> >
> > diff --git
> > a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
> > b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
> > index a86737c..5841421 100644
> > --- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
> > +++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
> > @@ -3,8 +3,13 @@ It can be configured to have one channel or two
> > channels. If configured as two channels, one is to transmit to the
> > video device and another is to receive from the video device.
> >
> > +Xilinx AXI DMA engine, it does transfers between memory and AXI4
> > +stream target devices. It can be configured to have one channel or two
> channels.
> > +If configured as two channels, one is to transmit to the device and
> > +another is to receive from the device.
> > +
> > Required properties:
> > -- compatible: Should be "xlnx,axi-vdma-1.00.a"
> > +- compatible: Should be "xlnx,axi-vdma-1.00.a" or "xlnx,axi-dma-1.00.a"
> > - #dma-cells: Should be <1>, see "dmas" property below
> > - reg: Should contain VDMA registers location and length.
> > - xlnx,num-fstores: Should be the number of framebuffers as configured in
> h/w.
> > @@ -59,6 +64,21 @@ axi_vdma_0: axivdma@40030000 {
> > } ;
> > } ;
> >
> > +axi_dma_0: axidma@40400000 {
>
> The node names should follow the generic names, hence 'dma-controller@...'.

Ok will fix in next version...

>
> > + compatible = "xlnx,axi-dma-1.00.a";
> > + #dma-cells = <1>;
> > + reg = < 0x40400000 0x10000 >;
> > + dma-channel@40400000 {
> > + compatible = "xlnx,axi-dma-mm2s-channel";
> > + interrupts = < 0 59 4 >;
> > + xlnx,datawidth = <0x40>;
> > + } ;
> > + dma-channel@40400030 {
> > + compatible = "xlnx,axi-dma-s2mm-channel";
> > + interrupts = < 0 58 4 >;
> > + xlnx,datawidth = <0x40>;
>
> Nit: The spacing around the '<' '>' is inconsistent. I'd just remove all redundant
> spaces.

Ok will fix in next version...

Regards,
Kedar.

>
> Sören
\
 
 \ /
  Last update: 2016-03-28 07:41    [W:0.102 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site