lkml.org 
[lkml]   [2016]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] usb: xhci: remove hardcoded gfp_t in xhci_mem_init
Date
xhci_mem_init() should use @flags, instead of hardcode, for DMA
memory allocation.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
---
drivers/usb/host/xhci-mem.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index bad0d1f..7c2f884 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -2365,8 +2365,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
* Section 5.4.8 - doorbell array must be
* "physically contiguous and 64-byte (cache line) aligned".
*/
- xhci->dcbaa = dma_alloc_coherent(dev, sizeof(*xhci->dcbaa), &dma,
- GFP_KERNEL);
+ xhci->dcbaa = dma_alloc_coherent(dev, sizeof(*xhci->dcbaa),
+ &dma, flags);
if (!xhci->dcbaa)
goto fail;
memset(xhci->dcbaa, 0, sizeof *(xhci->dcbaa));
@@ -2462,7 +2462,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)

xhci->erst.entries = dma_alloc_coherent(dev,
sizeof(struct xhci_erst_entry) * ERST_NUM_SEGS, &dma,
- GFP_KERNEL);
+ flags);
if (!xhci->erst.entries)
goto fail;
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
--
2.1.4
\
 
 \ /
  Last update: 2016-03-25 16:01    [W:0.029 / U:0.660 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site