lkml.org 
[lkml]   [2016]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 2/2] doc: dt: mtd: add a DT property to enable the use of 4byte-address op codes
On Tue, Mar 22, 2016 at 10:13 AM, Cyrille Pitchen
<cyrille.pitchen@atmel.com> wrote:
> This patch adds a new optional DT property which enables an alternative
> way of supporting memory size above 16MiB (128Mib). This new mechanism
> translates the regular 3byte-address op codes into their 4byte-address
> version whereas the old/default mecanism makes the SPI memory enter its
> 4byte-address mode, which has annoying side effects for early bootloaders.
>
> We cannot discover at run time whether the SPI NOR memory supports the
> 4byte-address op codes. For instance both Macronix MX25L25635E and
> MX25L25673G share the same JEDEC ID (C22019 without any extension byte).
> However the first one doesn't support 4byte-address op codes whereas the
> second one does.
>
> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
> ---
> Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt
> index 2c91c03e7eb0..8be610482089 100644
> --- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt
> +++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt
> @@ -66,6 +66,17 @@ Optional properties:
> Refer to your chips' datasheet to check if this is supported
> by your chip.
>
> +- m25p,4byte-opcodes: For memory size above 16MiB (128Mib), use the dedicated

m25p is not a vendor. So drop it or m25p-4byte-opcodes.

> + 4byte-address opcodes instead of entering the 4byte
> + address mode. This mode changes the internal state of the
> + chip so may conflict with some early boot loaders, which
> + expect to use the regular (Fast) Read opcodes with 3byte
> + address.
> + However 4byte-address opcodes are not supported by all
> + chips and support for them can not be detected at runtime.

s/can not/cannot/

> + Refer to you chip's datasheet to check if this is
> + supported by your chip.
> +
> Example:
>
> flash: m25p80@0 {
> --
> 1.8.2.2
>

\
 
 \ /
  Last update: 2016-03-23 14:21    [W:0.183 / U:0.436 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site