lkml.org 
[lkml]   [2016]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] tty/hvc: Use IRQF_SHARED for hvc consoles
Date
Samuel Mendoza-Jonas <sam@mendozajonas.com> writes:
> Commit 2def86a7200c
> ("hvc: Convert to using interrupts instead of opal events")
> enabled the use of interrupts in the hvc_driver for OPAL platforms.
> However on machines with more than one hvc console, any console after
> the first will fail to register an interrupt handler in
> notifier_add_irq() since all consoles share the same IRQ number but do
> not set the IRQF_SHARED flag:
>
> [ 51.179907] genirq: Flags mismatch irq 31. 00000000 (hvc_console) vs.
> 00000000 (hvc_console)
> [ 51.180010] hvc_open: request_irq failed with rc -16.
>
> This error propagates up to hvc_open() and the console is closed, but
> OPAL will still generate interrupts that are not handled, leading to
> rcu_sched stall warnings.
>
> Set IRQF_SHARED when calling request_irq, allowing additional consoles
> to start properly.
>
> Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
> Cc: <stable@vger.kernel.org> # 4.1.x-

Tested on 4.4.6 - seemed to stop (some of) the problems I was having
when using it as a kernel for the bootloader on a FSP based POWER8
system.

Tested-by: Stewart Smith <stewart@linux.vnet.ibm.com>

--
Stewart Smith
OPAL Architect, IBM.

\
 
 \ /
  Last update: 2016-03-23 07:01    [W:0.044 / U:0.916 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site