lkml.org 
[lkml]   [2016]   [Mar]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/3] ARM: OMAP3: Fix McBSP2/3 hwmod setup for sidetone
* Peter Ujfalusi <peter.ujfalusi@ti.com> [160322 01:54]:
> Tony,
>
> On 03/21/16 22:21, Tony Lindgren wrote:
> > Hi,
> >
> > * Peter Ujfalusi <peter.ujfalusi@ti.com> [160321 01:39]:
> >>
> >> This is also interesting:
> >> McBSP2 sidetone is in region 39 and 40 (module and L4 interconnect) which is
> >> unique in case of OMAP34xx and OMAP35xx, but it is overlapping with GPIO6 on
> >> OMAP36xx. Not sure what are the implications.
> >
> > Hmm GPIO6 is in a different L4 segment though? Maybe
> > you did not account for the segments?
> >
> > 0x49000000 + 0x20000 + 0x2000/0x4000/0x6000 for McBSP
> > 0x49000000 + 0x50000 + 0x8000 for GPIO6
> >
> > Or maybe I don't understand at which physical address the
> > overlap is? :)
>
> The addresses are not overlapping, but the Region Numbers for GPIO6 and McBSP2
> sidetone in Table 9-114 "Region Allocation for
> L4-Per Interconnect". But only in case of OMAP36xx

Oh OK, yeah the TRM region numbers are wrong, they skip unused
entries compared to the hardware AP table :) Basically the
TRM AP region numbering is useless and wrong.

Regards,

Tony

\
 
 \ /
  Last update: 2016-03-22 21:01    [W:0.052 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site