lkml.org 
[lkml]   [2016]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: usb: gadget breakage on N900: bind UDC by name passed via usb_gadget_driver structure
From
Date
Hi

On 2016-03-18 21:20, Pavel Machek wrote:
> Hi!
>
>>> USB gadget stops working for me on n900, if I merge
>> Could you please give us more details?
>> Which gadget driver do you use (g_nokia?)
> Ok, so I could get it to work with v4.5, and this patch. I'm including
> my config, too. No, I don't think I'm using g_nokia.

This shows that there are some serious problems, probably with your udc
driver, which doesn't handle deferred probe properly. Your patch
workaround it by waiting some predefined time before registering gadget
driver, however this is not the proper way. Please try to isolate what
exactly is needed to get the gadget driver registered properly in your
system or at least please provide some logs from the failed case.


>
> Best regards,
> Pavel
>
> diff --git a/.config b/.config
> new file mode 100644
> index 0000000..a504a94
> --- /dev/null
> +++ b/.config
> ...
> +# CONFIG_USB_SWITCH_FSA9480 is not set
> +# CONFIG_LATTICE_ECP3_CONFIG is not set
> +# CONFIG_SRAM is not set
> +# CONFIG_C2PORT is not set
> +
> +CONFIG_NET_VENDOR_WIZNET=y
> +# CONFIG_WIZNET_W5100 is not set
> +# CONFIG_WIZNET_W5300 is not set
> +# CONFIG_PHYLIB is not set
> +# CONFIG_MICREL_KS8995MA is not set
> +# CONFIG_PPP is not set
> +# CONFIG_SLIP is not set
> +CONFIG_USB_NET_DRIVERS=y
> +# CONFIG_USB_CATC is not set
> +# CONFIG_USB_KAWETH is not set
> +# CONFIG_USB_PEGASUS is not set
> +# CONFIG_USB_RTL8150 is not set
> +# CONFIG_USB_RTL8152 is not set
> +# CONFIG_USB_LAN78XX is not set
> +# CONFIG_USB_USBNET is not set
> +# CONFIG_USB_IPHETH is not set
> +CONFIG_WLAN=y
> +# CONFIG_WLAN_VENDOR_ADMTEK is not set
> +# CONFIG_WLAN_VENDOR_ATH is not set
> +# CONFIG_WLAN_VENDOR_ATMEL is not set
> +# CONFIG_WLAN_VENDOR_BROADCOM is not set
> +# CONFIG_WLAN_VENDOR_CISCO is not set
> +# CONFIG_WLAN_VENDOR_INTEL is not set
> +# CONFIG_WLAN_VENDOR_INTERSIL is not set
> +# CONFIG_WLAN_VENDOR_MARVELL is not set
> +
> +#
> +# USB HID support
> +#
> +CONFIG_USB_HID=y
> +# CONFIG_HID_PID is not set
> +# CONFIG_USB_HIDDEV is not set
> +
> +#
> +# I2C HID support
> +#
> +# CONFIG_I2C_HID is not set
> +CONFIG_USB_OHCI_LITTLE_ENDIAN=y
> +CONFIG_USB_SUPPORT=y
> +CONFIG_USB_COMMON=y
> +CONFIG_USB_ARCH_HAS_HCD=y
> +CONFIG_USB=y
> +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
> +
> +#
> +# Miscellaneous USB options
> +#
> +CONFIG_USB_DEFAULT_PERSIST=y
> +# CONFIG_USB_DYNAMIC_MINORS is not set
> +# CONFIG_USB_OTG is not set
> +# CONFIG_USB_OTG_WHITELIST is not set
> +# CONFIG_USB_OTG_BLACKLIST_HUB is not set
> +# CONFIG_USB_ULPI_BUS is not set
> +# CONFIG_USB_MON is not set
> +# CONFIG_USB_WUSB_CBAF is not set
> +
> +#
> +# USB Host Controller Drivers
> +#
> +# CONFIG_USB_C67X00_HCD is not set
> +# CONFIG_USB_XHCI_HCD is not set
> +# CONFIG_USB_EHCI_HCD is not set
> +# CONFIG_USB_OXU210HP_HCD is not set
> +# CONFIG_USB_ISP116X_HCD is not set
> +# CONFIG_USB_ISP1362_HCD is not set
> +# CONFIG_USB_FOTG210_HCD is not set
> +# CONFIG_USB_MAX3421_HCD is not set
> +# CONFIG_USB_OHCI_HCD is not set
> +# CONFIG_USB_SL811_HCD is not set
> +# CONFIG_USB_R8A66597_HCD is not set
> +# CONFIG_USB_HCD_TEST_MODE is not set
> +
> +#
> +# USB Device Class drivers
> +#
> +# CONFIG_USB_ACM is not set
> +# CONFIG_USB_PRINTER is not set
> +# CONFIG_USB_WDM is not set
> +# CONFIG_USB_TMC is not set
> +
> +#
> +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
> +#
> +
> +#
> +# also be needed; see USB_STORAGE Help for more info
> +#
> +# CONFIG_USB_STORAGE is not set
> +
> +#
> +# USB Imaging devices
> +#
> +# CONFIG_USB_MDC800 is not set
> +# CONFIG_USB_MICROTEK is not set
> +# CONFIG_USBIP_CORE is not set
> +CONFIG_USB_MUSB_HDRC=y
> +# CONFIG_USB_MUSB_HOST is not set
> +CONFIG_USB_MUSB_GADGET=y
> +# CONFIG_USB_MUSB_DUAL_ROLE is not set
> +
> +#
> +# Platform Glue Layer
> +#
> +# CONFIG_USB_MUSB_TUSB6010 is not set
> +CONFIG_USB_MUSB_OMAP2PLUS=y
> +# CONFIG_USB_MUSB_AM35X is not set
> +# CONFIG_USB_MUSB_DSPS is not set
> +
> +#
> +# MUSB DMA mode
> +#
> +CONFIG_MUSB_PIO_ONLY=y
> +# CONFIG_USB_DWC3 is not set
> +# CONFIG_USB_DWC2 is not set
> +# CONFIG_USB_CHIPIDEA is not set
> +# CONFIG_USB_ISP1760 is not set
> +
> +#
> +# USB port drivers
> +#
> +# CONFIG_USB_SERIAL is not set
> +
> diff --git a/drivers/usb/gadget/udc/udc-core.c b/drivers/usb/gadget/udc/udc-core.c
> index b86a6f0..bee109f 100644
> --- a/drivers/usb/gadget/udc/udc-core.c
> +++ b/drivers/usb/gadget/udc/udc-core.c
> @@ -542,14 +542,37 @@ err1:
> return ret;
> }
>
> -int usb_gadget_probe_driver(struct usb_gadget_driver *driver)
> +int usb_udc_attach_driver(const char *name, struct usb_gadget_driver *driver)
> +{
> + struct usb_udc *udc = NULL;
> + int ret = -ENODEV;
> +
> + mutex_lock(&udc_lock);
> + list_for_each_entry(udc, &udc_list, list) {
> + ret = strcmp(name, dev_name(&udc->dev));
> + if (!ret)
> + break;
> + }
> + if (ret) {
> + ret = -ENODEV;
> + goto out;
> + }
> + if (udc->driver) {
> + ret = -EBUSY;
> + goto out;
> + }
> + ret = udc_bind_to_driver(udc, driver);
> +out:
> + mutex_unlock(&udc_lock);
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(usb_udc_attach_driver);
> +
> +int __usb_gadget_probe_driver(struct usb_gadget_driver *driver)
> {
> struct usb_udc *udc = NULL;
> int ret = -ENODEV;
>
> - if (!driver || !driver->bind || !driver->setup)
> - return -EINVAL;
> -
> mutex_lock(&udc_lock);
> if (driver->udc_name) {
> list_for_each_entry(udc, &udc_list, list) {
> @@ -567,16 +590,47 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver)
> }
> }
>
> - list_add_tail(&driver->pending, &gadget_driver_pending_list);
> +// list_add_tail(&driver->pending, &gadget_driver_pending_list); FIXME
> pr_info("udc-core: couldn't find an available UDC - added [%s] to list of pending drivers\n",
> driver->function);
> +
> mutex_unlock(&udc_lock);
> - return 0;
> + return ret;
> found:
> ret = udc_bind_to_driver(udc, driver);
> mutex_unlock(&udc_lock);
> return ret;
> }
> +
> +#define USB_GADGET_BIND_RETRIES 5
> +#define USB_GADGET_BIND_TIMEOUT (3 * HZ)
> +static void usb_gadget_work(struct work_struct *work)
> +{
> + struct usb_gadget_driver *driver = container_of(work,
> + struct usb_gadget_driver,
> + work.work);
> + int res;
> +
> + if (driver->retries++ > USB_GADGET_BIND_RETRIES) {
> + pr_err("couldn't find an available UDC\n");
> + return;
> + }
> +
> + res = __usb_gadget_probe_driver(driver);
> + if (res == -ENODEV)
> + schedule_delayed_work(&driver->work, USB_GADGET_BIND_TIMEOUT);
> +}
> +
> +int usb_gadget_probe_driver(struct usb_gadget_driver *driver)
> +{
> + if (!driver || !driver->bind || !driver->setup)
> + return -EINVAL;
> +
> + INIT_DELAYED_WORK(&driver->work, usb_gadget_work);
> + schedule_delayed_work(&driver->work, 0);
> +
> + return 0;
> +}
> EXPORT_SYMBOL_GPL(usb_gadget_probe_driver);
>
> int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
> @@ -587,6 +641,8 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
> if (!driver || !driver->unbind)
> return -EINVAL;
>
> + cancel_delayed_work(&driver->work);
> +
> mutex_lock(&udc_lock);
> list_for_each_entry(udc, &udc_list, list)
> if (udc->driver == driver) {
> @@ -747,7 +803,7 @@ static int __init usb_udc_init(void)
> udc_class->dev_uevent = usb_udc_uevent;
> return 0;
> }
> -subsys_initcall(usb_udc_init);
> +late_initcall_sync(usb_udc_init);
>
> static void __exit usb_udc_exit(void)
> {
> diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
> index d82d006..adb1e68 100644
> --- a/include/linux/usb/gadget.h
> +++ b/include/linux/usb/gadget.h
> @@ -1014,6 +1014,8 @@ static inline int usb_gadget_activate(struct usb_gadget *gadget)
> * @resume: Invoked on USB resume. May be called in_interrupt.
> * @reset: Invoked on USB bus reset. It is mandatory for all gadget drivers
> * and should be called in_interrupt.
> + * @work: Gadget work used to bind to the USB controller.
> + * @retries: Gadget retries to bind to the USB controller.
> * @driver: Driver model state for this driver.
> * @udc_name: A name of UDC this driver should be bound to. If udc_name is NULL,
> * this driver will be bound to any available UDC.
> @@ -1075,6 +1077,8 @@ struct usb_gadget_driver {
> void (*suspend)(struct usb_gadget *);
> void (*resume)(struct usb_gadget *);
> void (*reset)(struct usb_gadget *);
> + struct delayed_work work;
> + int retries;
>
> /* FIXME support safe rmmod */
> struct device_driver driver;
>

Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland

\
 
 \ /
  Last update: 2016-03-21 13:21    [W:0.217 / U:0.516 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site