lkml.org 
[lkml]   [2016]   [Mar]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v13 2/6] Documentation, dt, numa: dt bindings for NUMA.
Date
From: Ganapatrao Kulkarni <gkulkarni@caviumnetworks.com>

Add DT bindings for numa mapping of memory, CPUs and IOs.

Reviewed-by: Robert Richter <rrichter@cavium.com>
Signed-off-by: Ganapatrao Kulkarni <gkulkarni@caviumnetworks.com>
Signed-off-by: David Daney <david.daney@cavium.com>
---
Documentation/devicetree/bindings/numa.txt | 272 +++++++++++++++++++++++++++++
1 file changed, 272 insertions(+)
create mode 100644 Documentation/devicetree/bindings/numa.txt

diff --git a/Documentation/devicetree/bindings/numa.txt b/Documentation/devicetree/bindings/numa.txt
new file mode 100644
index 0000000..ec5ed7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/numa.txt
@@ -0,0 +1,272 @@
+==============================================================================
+NUMA binding description.
+==============================================================================
+
+==============================================================================
+1 - Introduction
+==============================================================================
+
+Systems employing a Non Uniform Memory Access (NUMA) architecture contain
+collections of hardware resources including processors, memory, and I/O buses,
+that comprise what is commonly known as a NUMA node.
+Processor accesses to memory within the local NUMA node is generally faster
+than processor accesses to memory outside of the local NUMA node.
+DT defines interfaces that allow the platform to convey NUMA node
+topology information to OS.
+
+==============================================================================
+2 - numa-node-id
+==============================================================================
+
+For the purpose of identification, each NUMA node is associated with a unique
+token known as a node id. For the purpose of this binding
+a node id is a 32-bit integer.
+
+A device node is associated with a NUMA node by the presence of a
+numa-node-id property which contains the node id of the device.
+
+Example:
+ /* numa node 0 */
+ numa-node-id = <0>;
+
+ /* numa node 1 */
+ numa-node-id = <1>;
+
+==============================================================================
+3 - distance-map
+==============================================================================
+
+The device tree node distance-map describes the relative
+distance (memory latency) between all numa nodes.
+
+- compatible : Should at least contain "numa-distance-map-v1".
+
+- distance-matrix
+ This property defines a matrix to describe the relative distances
+ between all numa nodes.
+ It is represented as a list of node pairs and their relative distance.
+
+ Note:
+ 1. Each entry represents distance from first node to second node.
+ The distances are equal in either direction.
+ 2. The distance from a node to self (local distance) is represented
+ with value 10 and all internode distance should be represented with
+ a value greater than 10.
+ 3. distance-matrix should have entries in lexicographical ascending
+ order of nodes.
+ 4. There must be only one device node distance-map which must reside in the root node.
+
+Example:
+ 4 nodes connected in mesh/ring topology as below,
+
+ 0_______20______1
+ | |
+ | |
+ 20 20
+ | |
+ | |
+ |_______________|
+ 3 20 2
+
+ if relative distance for each hop is 20,
+ then internode distance would be,
+ 0 -> 1 = 20
+ 1 -> 2 = 20
+ 2 -> 3 = 20
+ 3 -> 0 = 20
+ 0 -> 2 = 40
+ 1 -> 3 = 40
+
+ and dt presentation for this distance matrix is,
+
+ distance-map {
+ compatible = "numa-distance-map-v1";
+ distance-matrix = <0 0 10>,
+ <0 1 20>,
+ <0 2 40>,
+ <0 3 20>,
+ <1 0 20>,
+ <1 1 10>,
+ <1 2 20>,
+ <1 3 40>,
+ <2 0 40>,
+ <2 1 20>,
+ <2 2 10>,
+ <2 3 20>,
+ <3 0 20>,
+ <3 1 40>,
+ <3 2 20>,
+ <3 3 10>;
+ };
+
+==============================================================================
+4 - Example dts
+==============================================================================
+
+Dual socket system consists of 2 boards connected through ccn bus and
+each board having one socket/soc of 8 cpus, memory and pci bus.
+
+ memory@c00000 {
+ device_type = "memory";
+ reg = <0x0 0xc00000 0x0 0x80000000>;
+ /* node 0 */
+ numa-node-id = <0>;
+ };
+
+ memory@10000000000 {
+ device_type = "memory";
+ reg = <0x100 0x0 0x0 0x80000000>;
+ /* node 1 */
+ numa-node-id = <1>;
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ /* node 0 */
+ numa-node-id = <0>;
+ };
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ numa-node-id = <0>;
+ };
+ cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ numa-node-id = <0>;
+ };
+ cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ numa-node-id = <0>;
+ };
+ cpu@4 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x4>;
+ enable-method = "psci";
+ numa-node-id = <0>;
+ };
+ cpu@5 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x5>;
+ enable-method = "psci";
+ numa-node-id = <0>;
+ };
+ cpu@6 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x6>;
+ enable-method = "psci";
+ numa-node-id = <0>;
+ };
+ cpu@7 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x7>;
+ enable-method = "psci";
+ numa-node-id = <0>;
+ };
+ cpu@8 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x8>;
+ enable-method = "psci";
+ /* node 1 */
+ numa-node-id = <1>;
+ };
+ cpu@9 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x9>;
+ enable-method = "psci";
+ numa-node-id = <1>;
+ };
+ cpu@a {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0xa>;
+ enable-method = "psci";
+ numa-node-id = <1>;
+ };
+ cpu@b {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0xb>;
+ enable-method = "psci";
+ numa-node-id = <1>;
+ };
+ cpu@c {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0xc>;
+ enable-method = "psci";
+ numa-node-id = <1>;
+ };
+ cpu@d {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0xd>;
+ enable-method = "psci";
+ numa-node-id = <1>;
+ };
+ cpu@e {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0xe>;
+ enable-method = "psci";
+ numa-node-id = <1>;
+ };
+ cpu@f {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0xf>;
+ enable-method = "psci";
+ numa-node-id = <1>;
+ };
+ };
+
+ pcie0: pcie0@848000000000 {
+ compatible = "arm,armv8";
+ device_type = "pci";
+ bus-range = <0 255>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0x8480 0x00000000 0 0x10000000>; /* Configuration space */
+ ranges = <0x03000000 0x8010 0x00000000 0x8010 0x00000000 0x70 0x00000000>;
+ /* node 0 */
+ numa-node-id = <0>;
+ };
+
+ pcie1: pcie1@948000000000 {
+ compatible = "arm,armv8";
+ device_type = "pci";
+ bus-range = <0 255>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0x9480 0x00000000 0 0x10000000>; /* Configuration space */
+ ranges = <0x03000000 0x9010 0x00000000 0x9010 0x00000000 0x70 0x00000000>;
+ /* node 1 */
+ numa-node-id = <1>;
+ };
+
+ distance-map {
+ compatible = "numa-distance-map-v1";
+ distance-matrix = <0 0 10>,
+ <0 1 20>,
+ <1 1 10>;
+ };
--
1.8.3.1
\
 
 \ /
  Last update: 2016-03-03 00:41    [W:0.109 / U:2.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site