Messages in this thread | | | Date | Thu, 17 Mar 2016 10:03:05 -0500 | From | Rob Herring <> | Subject | Re: [PATCH 5/5] pwm: pwm-tiehrpwm: Update dt binding document to use generic node name |
| |
On Mon, Mar 07, 2016 at 01:51:58PM -0600, Franklin S Cooper Jr wrote: > Now that the node name has been changed from ehrpwm to pwm the document > should show this proper usage. Also change the unit address in the example > from 0 to the proper physical address value that should be used. > > Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> > --- > Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt > index 9c100b2..20211ed 100644 > --- a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt > +++ b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt > @@ -15,14 +15,14 @@ Optional properties: > > Example: > > -ehrpwm0: ehrpwm@0 { /* EHRPWM on am33xx */ > +ehrpwm0: pwm@48300200 { /* EHRPWM on am33xx */ > compatible = "ti,am33xx-ehrpwm"; > #pwm-cells = <3>; > reg = <0x48300200 0x100>; > ti,hwmods = "ehrpwm0"; > }; > > -ehrpwm0: ehrpwm@0 { /* EHRPWM on da850 */ > +ehrpwm0: pwm@01f00000 { /* EHRPWM on da850 */
No leading 0s, but more importantly the address is wrong.
> compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm"; > #pwm-cells = <3>; > reg = <0x300000 0x2000>; > -- > 2.7.0 >
| |