lkml.org 
[lkml]   [2016]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V7 03/12] thermal: tegra: get rid of PDIV/HOTSPOT hack
On Tue, Mar 15, 2016 at 02:21:53PM +0800, Wei Ni wrote:
>
>
> On 2016年03月15日 04:05, Eduardo Valentin wrote:
> > * PGP Signed by an unknown key
> >
> > On Fri, Mar 11, 2016 at 11:09:14AM +0800, Wei Ni wrote:
> >> Get rid of T124-specific PDIV/HOTSPOT hack.
> >> tegra-soctherm.c contained a hack to set the SENSOR_PDIV and
> >> SENSOR_HOTSPOT_OFFSET registers - it just did two writes of
> >> T124-specific opaque values. Convert these into a form that can be
> >> substituted on a per-chip basis, and into structure fields that have
> >> at least some independent meaning.
> >>
> >> Signed-off-by: Wei Ni <wni@nvidia.com>
> >> ---
> >> drivers/thermal/tegra/tegra-soctherm.c | 18 ++++++++++++++----
> >> 1 file changed, 14 insertions(+), 4 deletions(-)
> >>
> >> diff --git a/drivers/thermal/tegra/tegra-soctherm.c b/drivers/thermal/tegra/tegra-soctherm.c
> >> index b3ec0faa2bee..b4b791ebfbb6 100644
> >> --- a/drivers/thermal/tegra/tegra-soctherm.c
> >> +++ b/drivers/thermal/tegra/tegra-soctherm.c
> >> @@ -48,14 +48,12 @@
> >> #define SENSOR_CONFIG2_THERMB_SHIFT 0
> >>
> >> #define SENSOR_PDIV 0x1c0
> >> -#define SENSOR_PDIV_T124 0x8888
> >> #define SENSOR_PDIV_CPU_MASK (0xf << 12)
> >> #define SENSOR_PDIV_GPU_MASK (0xf << 8)
> >> #define SENSOR_PDIV_MEM_MASK (0xf << 4)
> >> #define SENSOR_PDIV_PLLX_MASK (0xf << 0)
> >>
> >> #define SENSOR_HOTSPOT_OFF 0x1c4
> >> -#define SENSOR_HOTSPOT_OFF_T124 0x00060600
> >> #define SENSOR_HOTSPOT_CPU_MASK (0xff << 16)
> >> #define SENSOR_HOTSPOT_GPU_MASK (0xff << 8)
> >> #define SENSOR_HOTSPOT_MEM_MASK (0xff << 0)
> >> @@ -436,6 +434,7 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
> >> struct resource *res;
> >> unsigned int i;
> >> int err;
> >> + u32 pdiv, hotspot;
> >>
> >> const struct tegra_tsensor *tsensors = t124_tsensors;
> >> const struct tegra_tsensor_group **ttgs = tegra124_tsensor_groups;
> >> @@ -493,8 +492,19 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
> >> goto disable_clocks;
> >> }
> >>
> >> - writel(SENSOR_PDIV_T124, tegra->regs + SENSOR_PDIV);
> >> - writel(SENSOR_HOTSPOT_OFF_T124, tegra->regs + SENSOR_HOTSPOT_OFF);
> >> + /* Program pdiv and hotspot offsets per THERM */
> >> + pdiv = readl(tegra->regs + SENSOR_PDIV);
> >> + hotspot = readl(tegra->regs + SENSOR_HOTSPOT_OFF);
> >> + for (i = 0; i < TEGRA124_SOCTHERM_SENSOR_NUM; ++i) {
> >> + pdiv = REG_SET_MASK(pdiv, ttgs[i]->pdiv_mask,
> >> + ttgs[i]->pdiv);
> >> + if (ttgs[i]->id != TEGRA124_SOCTHERM_SENSOR_PLLX)
> >> + hotspot = REG_SET_MASK(hotspot,
> >> + ttgs[i]->pllx_hotspot_mask,
> >> + ttgs[i]->pllx_hotspot_diff);
> >> + }
> >> + writel(pdiv, tegra->regs + SENSOR_PDIV);
> >> + writel(hotspot, tegra->regs + SENSOR_HOTSPOT_OFF);
> >
> > Is the above logic the same for all supported chips? e.g. do we always
> > skip pllx for hotspot configuration?
>
> Yes, this logic support Tegra124, Tegra210, and Tegra132 which I will send out
> in next series.


Ok. Could you please add a comment then explaining why pllx is not
needed for the hotspot configuration?

>
> >
> >
> >>
> >> /* Initialize thermctl sensors */
> >>
> >> --
> >> 1.9.1
> >>
> >
> > * Unknown Key
> > * 0x7DA4E256
> >
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2016-03-15 21:41    [W:0.444 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site