lkml.org 
[lkml]   [2016]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v2 1/3] net: thunderx: Cleanup PHY probing code.
    Date
    From: David Daney <david.daney@cavium.com>

    Remove the call to force the octeon-mdio driver to be loaded. Allow
    the standard driver loading mechanisms to load the PHY drivers, and
    use -EPROBE_DEFER to cause the BGX driver to be probed only after the
    PHY drivers are available.

    Reorder the setting of MAC addresses and PHY probing to allow BGX
    LMACs with no attached PHY to still be assigned a MAC address.

    Signed-off-by: David Daney <david.daney@cavium.com>
    ---
    drivers/net/ethernet/cavium/thunder/thunder_bgx.c | 29 ++++++++++++++---------
    1 file changed, 18 insertions(+), 11 deletions(-)

    diff --git a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
    index f8abdff..feed231 100644
    --- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
    +++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
    @@ -978,27 +978,37 @@ static int bgx_init_of_phy(struct bgx *bgx)
    const char *mac;

    device_for_each_child_node(&bgx->pdev->dev, fwn) {
    + struct phy_device *pd;
    struct device_node *phy_np;
    struct device_node *node = to_of_node(fwn);

    - /* If it is not an OF node we cannot handle it yet, so
    - * exit the loop.
    + /* Should always be an OF node. But if it is not, we
    + * cannot handle it, so exit the loop.
    */
    if (!node)
    break;

    - phy_np = of_parse_phandle(node, "phy-handle", 0);
    - if (!phy_np)
    - continue;
    -
    - bgx->lmac[lmac].phydev = of_phy_find_device(phy_np);
    -
    mac = of_get_mac_address(node);
    if (mac)
    ether_addr_copy(bgx->lmac[lmac].mac, mac);

    SET_NETDEV_DEV(&bgx->lmac[lmac].netdev, &bgx->pdev->dev);
    bgx->lmac[lmac].lmacid = lmac;
    +
    + phy_np = of_parse_phandle(node, "phy-handle", 0);
    + /* If there is no phy or defective firmware presents
    + * this cortina phy, for which there is no driver
    + * support, ignore it.
    + */
    + if (phy_np &&
    + !of_device_is_compatible(phy_np, "cortina,cs4223-slice")) {
    + /* Wait until the phy drivers are available */
    + pd = of_phy_find_device(phy_np);
    + if (!pd)
    + return -EPROBE_DEFER;
    + bgx->lmac[lmac].phydev = pd;
    + }
    +
    lmac++;
    if (lmac == MAX_LMAC_PER_BGX) {
    of_node_put(node);
    @@ -1032,9 +1042,6 @@ static int bgx_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
    struct bgx *bgx = NULL;
    u8 lmac;

    - /* Load octeon mdio driver */
    - octeon_mdiobus_force_mod_depencency();
    -
    bgx = devm_kzalloc(dev, sizeof(*bgx), GFP_KERNEL);
    if (!bgx)
    return -ENOMEM;
    --
    1.7.11.7
    \
     
     \ /
      Last update: 2016-03-11 19:41    [W:2.930 / U:0.044 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site