Messages in this thread Patch in this message | | | From | Caesar Wang <> | Subject | [PATCH 2/6] net: arc_emac: add phy-reset-* are optional for device tree | Date | Fri, 11 Mar 2016 18:55:27 +0800 |
| |
This patch adds the following property for arc_emac.
1) phy-reset-gpios: The phy-reset-gpios is an optional property for arc emac device tree boot. Change the binding document to match the driver code.
2) phy-reset-duration: Different boards may require different phy reset duration. Add property phy-reset-duration for device tree probe, so that the boards that need a longer reset duration can specify it in their device tree.
3) phy-reset-active-high: We need that for a custom hardware that needs the reverse reset sequence.
Anyway, we can add the above property for arc emac.
Signed-off-by: Caesar Wang <wxt@rock-chips.com> ---
Documentation/devicetree/bindings/net/arc_emac.txt | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/arc_emac.txt b/Documentation/devicetree/bindings/net/arc_emac.txt index a1d71eb..6389b00 100644 --- a/Documentation/devicetree/bindings/net/arc_emac.txt +++ b/Documentation/devicetree/bindings/net/arc_emac.txt @@ -7,6 +7,16 @@ Required properties: - max-speed: see ethernet.txt file in the same directory. - phy: see ethernet.txt file in the same directory. +Optional properties: +- phy-reset-gpios : Should specify the gpio for phy reset +- phy-reset-duration : Reset duration in milliseconds. Should present + only if property "phy-reset-gpios" is available. Missing the property + will have the duration be 1 millisecond. Numbers greater than 1000 are + invalid and 1 millisecond will be used instead. +- phy-reset-active-high : If present then the reset sequence using the GPIO + specified in the "phy-reset-gpios" property is reversed (H=reset state, + L=operation state). + Clock handling: The clock frequency is needed to calculate and set polling period of EMAC. It must be provided by one of: -- 1.9.1
| |