Messages in this thread | | | Subject | Re: [PATCH v2 0/4] Add Ethernet support on STM32F429 | From | Maxime Coquelin <> | Date | Tue, 1 Mar 2016 18:39:21 +0100 |
| |
Hi Alex,
On 02/23/2016 04:10 PM, Alexandre TORGUE wrote: > STM32F429 Chip embeds a Synopsys 3.50a MAC IP. > This series: > -enhance current stmmac driver to control it (code already > available) and adds basic glue for STM32F429 chip. > -Enable basic Net config in kernel. > > Note that DT patches are not present because STM32 pinctrl code is not > yet avalaible. > > Changes since v1: > -Fix Kbuild issue in Kconfig. > -Remove init/exit callbacks. Suspend/Resume and remove driver is no more > driven in stmmac_pltfr but directly in dwmac-stm32 glue driver. > -Take into account Joachim review. > > Regards. > > Alexandre. > > Alexandre TORGUE (4): > net: ethernet: dwmac: add Ethernet glue logic for stm32 chip > Documentation: Bindings: Add STM32 DWMAC glue > net: ethernet: stmmac: add support of Synopsys 3.50a MAC IP > ARM: STM32: Enable Ethernet in stm32_defconfig > > .../devicetree/bindings/net/stm32-dwmac.txt | 41 ++++ > arch/arm/configs/stm32_defconfig | 9 + > drivers/net/ethernet/stmicro/stmmac/Kconfig | 12 ++ > drivers/net/ethernet/stmicro/stmmac/Makefile | 1 + > drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c | 208 +++++++++++++++++++++ > .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 1 + > 6 files changed, 272 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.txt > create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c >
You can add my: Tested-by: Maxime Coquelin <maxime.coquelin@st.com>
Thanks! Maxime
| |