lkml.org 
[lkml]   [2016]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/4] regulator: helper: Add helper to configure active-discharge using regmap
Date
Add helper function to set the state of active-discharge of
regulator using regmap. The HW regulator driver can directly
use this by providing the necessary information in the regulator
descriptor.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
drivers/regulator/helpers.c | 23 +++++++++++++++++++++++
include/linux/regulator/driver.h | 14 ++++++++++++++
2 files changed, 37 insertions(+)

diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c
index 3bbb326..b1e32e7 100644
--- a/drivers/regulator/helpers.c
+++ b/drivers/regulator/helpers.c
@@ -465,3 +465,26 @@ int regulator_get_bypass_regmap(struct regulator_dev *rdev, bool *enable)
return 0;
}
EXPORT_SYMBOL_GPL(regulator_get_bypass_regmap);
+
+/**
+ * regulator_set_active_discharge_regmap - Default set_active_discharge()
+ * using regmap
+ *
+ * @rdev: device to operate on.
+ * @enable: state to set, 0 to disable and 1 to enable.
+ */
+int regulator_set_active_discharge_regmap(struct regulator_dev *rdev,
+ bool enable)
+{
+ unsigned int val;
+
+ if (enable)
+ val = rdev->desc->active_discharge_on;
+ else
+ val = rdev->desc->active_discharge_off;
+
+ return regmap_update_bits(rdev->regmap,
+ rdev->desc->active_discharge_reg,
+ rdev->desc->active_discharge_mask, val);
+}
+EXPORT_SYMBOL_GPL(regulator_set_active_discharge_regmap);
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 59dbaf7..cd271e8 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -269,6 +269,14 @@ enum regulator_type {
* @bypass_mask: Mask for control when using regmap set_bypass
* @bypass_val_on: Enabling value for control when using regmap set_bypass
* @bypass_val_off: Disabling value for control when using regmap set_bypass
+ * @active_discharge_off: Enabling value for control when using regmap
+ * set_active_discharge
+ * @active_discharge_on: Disabling value for control when using regmap
+ * set_active_discharge
+ * @active_discharge_mask: Mask for control when using regmap
+ * set_active_discharge
+ * @active_discharge_reg: Register for control when using regmap
+ * set_active_discharge
*
* @enable_time: Time taken for initial enable of regulator (in uS).
* @off_on_delay: guard time (in uS), before re-enabling a regulator
@@ -318,6 +326,10 @@ struct regulator_desc {
unsigned int bypass_mask;
unsigned int bypass_val_on;
unsigned int bypass_val_off;
+ unsigned int active_discharge_on;
+ unsigned int active_discharge_off;
+ unsigned int active_discharge_mask;
+ unsigned int active_discharge_reg;

unsigned int enable_time;

@@ -450,6 +462,8 @@ int regulator_set_voltage_time_sel(struct regulator_dev *rdev,
int regulator_set_bypass_regmap(struct regulator_dev *rdev, bool enable);
int regulator_get_bypass_regmap(struct regulator_dev *rdev, bool *enable);

+int regulator_set_active_discharge_regmap(struct regulator_dev *rdev,
+ bool enable);
void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data);

#endif
--
2.1.4
\
 
 \ /
  Last update: 2016-03-01 14:41    [W:0.090 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site